| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1428416031-30765-2-git-send-email-g.portay@overkiz.com>
Date: Tue, 7 Apr 2015 16:13:51 +0200
From: Gaël PORTAY <g.portay@...rkiz.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Gaël PORTAY <g.portay@...rkiz.com>
Subject: [PATCH] ARM: at91/dt: add support for kizbox2.
Add DT file for Kizbox 2 board.
This board is based on Atmel's SAMA5D31 Cortex-A5 SoC.
Signed-off-by: Gaël PORTAY <g.portay@...rkiz.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-kizbox2.dts | 223 +++++++++++++++++++++++++++++++++++++
2 files changed, 224 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-kizbox2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c11888..d2b559d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -37,6 +37,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
new file mode 100644
index 0000000..0e49d0d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -0,0 +1,223 @@
+/*
+ * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@...rkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3_emac.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox 2";
+ compatible = "overkiz,kizbox2", "atmel,sama5d31ek", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ i2c1: i2c@...18000 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vled_reg: LDO_REG3 {
+ regulator-name = "VLED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v8_rf_reg: LDO_REG4 {
+ regulator-name = "V3V8_RF";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ usart0: serial@...1c000 {
+ status = "okay";
+ };
+
+ usart1: serial@...20000 {
+ status = "okay";
+ };
+
+ pwm0: pwm@...2c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+ &pinctrl_pwm0_pwmh1_1
+ &pinctrl_pwm0_pwmh2_0>;
+ status = "okay";
+ };
+
+ adc0: adc@...18000 {
+ atmel,adc-vref = <3333>;
+ status = "okay";
+ };
+
+ usart2: serial@...20000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@...2c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@...fee00 {
+ status = "okay";
+ };
+
+ pmc: pmc@...ffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ watchdog@...ffe40 {
+ status = "okay";
+ };
+ };
+
+ usb1: ohci@...00000 {
+ status = "okay";
+ };
+
+ usb2: ehci@...00000 {
+ status = "okay";
+ };
+
+ nand0: nand@...00000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@...00 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists