[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1428508578-21022-7-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Date: Wed, 8 Apr 2015 16:56:15 +0100
From: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
To: lee.jones@...aro.org
Cc: sameo@...ux.intel.com, broonie@...nel.org, lgirdwood@...il.com,
patches@...nsource.wolfsonmicro.com, linux-kernel@...r.kernel.org
Subject: [PATCH 6/9] regulator: arizona-ldo1: Add additional supported voltage
This patch adds support for the 1.175V mode on the LDO1 regulator on the
wm5110. This is need as part of the low power sleep mode operation.
Signed-off-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/arizona-ldo1.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 8169165..c9f6302 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -178,6 +178,16 @@ static const struct regulator_init_data arizona_ldo1_default = {
.num_consumer_supplies = 1,
};
+static const struct regulator_init_data arizona_ldo1_wm5110 = {
+ .constraints = {
+ .min_uV = 1175000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = 1,
+};
+
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
struct regulator_config *config,
const struct regulator_desc *desc)
@@ -243,6 +253,11 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
+ case WM5110:
+ case WM8280:
+ desc = &arizona_ldo1;
+ ldo1->init_data = arizona_ldo1_wm5110;
+ break;
default:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists