[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1428517295-12825-1-git-send-email-rjui@broadcom.com>
Date: Wed, 8 Apr 2015 11:21:32 -0700
From: Ray Jui <rjui@...adcom.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>
CC: Scott Branden <sbranden@...adcom.com>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>
Subject: [PATCH v8 0/3] pci: iproc: Add Broadcom iProc PCIe support
This patch series adds the support for Broadcom iProc PCIe controller
pcie-iproc.c servers as the common core driver, and front-end bus
interface needs to be added to support different bus interfaces
pcie-iproc-pltfm.c contains the support for the platform bus interface
Changes from v7:
- Consolidate iProc PCIe patches and rebase to v4.0-rc1 per request
from Bjorn
- Restrict CONFIG_PCIE_IPROC to ARM based platforms
- Spell out 'pltfm' as 'platform'
Changes from v6:
- Fix print formatting
- Fix section mismatch warning by removing __init from the probe function
- Fix Kconfig to force it only compiling for ARM based platforms
Changes from v5:
- Sync code base to v4.0-rc2
- Change export symbols of common PCI functions to GPL only
- Add comment to describe how configuration register access are protected
at the higher layer through 'pci_lock'
- Use generic PCI functions for configuration register access and implement
'map_bus' callback to support it
- Move 'pci_fixup_irqs' to before devices are added to the bus
- Remove 'extern' from function prototype declared in the header
Changes from v4:
- iProc PCIe driver module support was not included in patch series v4.
This patch series (v5) fixes it
Changes from v3:
- Export symbols of several PCI functions so they can be used by drivers
compiled as kernel module
- Add additional support to the Broadcom iProc PCIe driver so it can be
installed/uninstalled as kernel loadable module
Changes from v2:
- Major rework of the PCIe driver to factor out common generic code from
front-end bus interface. Support for generic platform bus interface is
also added
- Adapt to several new PCI APIs that have been introduced lately
Changes from v1:
- Add standard PCI interrupt DT properties "#interrupt-cells",
"interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be
supported by using standard PCI OF IRQ parsing function
- Get rid of custom IRQ mapping function in the driver. Use
of_irq_parse_and_map_pci instead
Ray Jui (3):
PCI: Export symbols of PCI functions
PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
pci: iproc: Add Broadcom iProc PCIe support
.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 63 +++++
drivers/pci/host/Kconfig | 19 ++
drivers/pci/host/Makefile | 2 +
drivers/pci/host/pcie-iproc-platform.c | 108 ++++++++
drivers/pci/host/pcie-iproc.c | 268 ++++++++++++++++++++
drivers/pci/host/pcie-iproc.h | 42 +++
drivers/pci/pci.c | 1 +
drivers/pci/probe.c | 1 +
drivers/pci/remove.c | 2 +
drivers/pci/setup-bus.c | 1 +
drivers/pci/setup-irq.c | 1 +
11 files changed, 508 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
create mode 100644 drivers/pci/host/pcie-iproc-platform.c
create mode 100644 drivers/pci/host/pcie-iproc.c
create mode 100644 drivers/pci/host/pcie-iproc.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists