| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1428574087-18502-1-git-send-email-sergei@s15v.net>
Date: Thu, 9 Apr 2015 13:08:04 +0300
From: Sergei Zviagintsev <sergei@...v.net>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Mack <daniel@...que.org>,
David Herrmann <dh.herrmann@...glemail.com>,
Djalal Harouni <tixxdz@...ndz.org>
Cc: Jonathan Corbet <corbet@....net>, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, Sergei Zviagintsev <sergei@...v.net>
Subject: [PATCH] Documentation: kdbus: Fix typos
Signed-off-by: Sergei Zviagintsev <sergei@...v.net>
---
Documentation/kdbus/kdbus.bus.xml | 9 ++++-----
Documentation/kdbus/kdbus.connection.xml | 10 ++++------
Documentation/kdbus/kdbus.endpoint.xml | 2 +-
Documentation/kdbus/kdbus.item.xml | 9 ++++-----
Documentation/kdbus/kdbus.match.xml | 14 ++++++++------
Documentation/kdbus/kdbus.message.xml | 11 +++++------
Documentation/kdbus/kdbus.xml | 6 +++---
7 files changed, 29 insertions(+), 32 deletions(-)
diff --git a/Documentation/kdbus/kdbus.bus.xml b/Documentation/kdbus/kdbus.bus.xml
index 4d875e59ac02..4b9a0ac1b351 100644
--- a/Documentation/kdbus/kdbus.bus.xml
+++ b/Documentation/kdbus/kdbus.bus.xml
@@ -28,8 +28,7 @@
<citerefentry>
<refentrytitle>kdbus.message</refentrytitle>
<manvolnum>7</manvolnum>
- </citerefentry>
- ).
+ </citerefentry>).
Each bus is independent, and operations on the bus will not have any
effect on other buses. A bus is a management entity that controls the
addresses of its connections, their policies and message transactions
@@ -42,7 +41,7 @@
<refentrytitle>kdbus.fs</refentrytitle>
<manvolnum>7</manvolnum>
</citerefentry>
- , a bus is presented as a directory. No operations can be performed on
+ a bus is presented as a directory. No operations can be performed on
the bus itself; instead you need to perform the operations on an endpoint
associated with the bus. Endpoints are accessible as files underneath the
bus directory. A default endpoint called <constant>bus</constant> is
@@ -165,8 +164,8 @@ struct kdbus_cmd {
<citerefentry>
<refentrytitle>kdbus.item</refentrytitle>
<manvolnum>7</manvolnum>
- </citerefentry>
- ) are expected for <constant>KDBUS_CMD_BUS_MAKE</constant>.
+ </citerefentry>)
+ are expected for <constant>KDBUS_CMD_BUS_MAKE</constant>.
</para>
<variablelist>
<varlistentry>
diff --git a/Documentation/kdbus/kdbus.connection.xml b/Documentation/kdbus/kdbus.connection.xml
index 09852125b2d4..cefb419f1093 100644
--- a/Documentation/kdbus/kdbus.connection.xml
+++ b/Documentation/kdbus/kdbus.connection.xml
@@ -50,8 +50,7 @@
<citerefentry>
<refentrytitle>kdbus.match</refentrytitle>
<manvolnum>7</manvolnum>
- </citerefentry>
- ).
+ </citerefentry>).
</para>
<para>
Messages synthesized and sent directly by the kernel will carry the
@@ -595,13 +594,13 @@ struct kdbus_cmd_info {
</varlistentry>
<varlistentry>
- <term><varname>flags</varname></term>
+ <term><varname>attach_flags</varname></term>
<listitem><para>
Specifies which metadata items should be attached to the answer. See
<citerefentry>
<refentrytitle>kdbus.message</refentrytitle>
<manvolnum>7</manvolnum>
- </citerefentry>
+ </citerefentry>.
</para></listitem>
</varlistentry>
@@ -986,8 +985,7 @@ struct kdbus_cmd {
<term><varname>items</varname></term>
<listitem>
<para>
- Items to describe the connection details to be updated. The
- following item types are supported.
+ The following item types are supported.
</para>
<variablelist>
<varlistentry>
diff --git a/Documentation/kdbus/kdbus.endpoint.xml b/Documentation/kdbus/kdbus.endpoint.xml
index 76e325d4e931..f3eb4f8c58ce 100644
--- a/Documentation/kdbus/kdbus.endpoint.xml
+++ b/Documentation/kdbus/kdbus.endpoint.xml
@@ -201,7 +201,7 @@ struct kdbus_cmd {
<para>
To update an existing endpoint, the
<constant>KDBUS_CMD_ENDPOINT_UPDATE</constant> command is used on the file
- descriptor that was used to create the update, using
+ descriptor that was used to create the endpoint, using
<constant>KDBUS_CMD_ENDPOINT_MAKE</constant>. The only relevant detail of
the endpoint that can be updated is the policy. When the command is
employed, the policy of the endpoint is <emphasis>replaced</emphasis>
diff --git a/Documentation/kdbus/kdbus.item.xml b/Documentation/kdbus/kdbus.item.xml
index bfe47362097f..09f8b903116f 100644
--- a/Documentation/kdbus/kdbus.item.xml
+++ b/Documentation/kdbus/kdbus.item.xml
@@ -139,7 +139,7 @@ struct kdbus_item {
<term><constant>KDBUS_ITEM_NEGOTIATE</constant></term>
<listitem><para>
With this item is attached to any ioctl, programs can
- <emphasis>probe</emphasis> the kernel for known item items.
+ <emphasis>probe</emphasis> the kernel for known item types.
The item carries an array of <type>uint64_t</type> values in
<varname>item.data64</varname>, each set to an item type to
probe. The kernel will reset each member of this array that is
@@ -232,7 +232,6 @@ struct kdbus_memfd {
When received as item attached to a message, the array will
contain the numbers of the installed file descriptors, or
<constant>-1</constant> in case an error occurred.
- file descriptor.
In either case, the number of entries in the array is derived from
the item's total size. See
<citerefentry>
@@ -487,7 +486,7 @@ struct kdbus_pids {
a remote peer is a member of, stored as array of
<type>uint32_t</type> values in <varname>item.data32</varname>.
The array length can be determined by looking at the item's total
- size, subtracting the size of the header and and dividing the
+ size, subtracting the size of the header and dividing the
remainder by <constant>sizeof(uint32_t)</constant>.
</para></listitem>
</varlistentry>
@@ -748,7 +747,7 @@ struct kdbus_notify_name_change {
This item is sent as attachment to a
<emphasis>kernel notification</emphasis>. It informs the receiver
that an expected reply to a message was not received in time.
- The remote peer ID and the message cookie is stored in the message
+ The remote peer ID and the message cookie are stored in the message
header. See
<citerefentry>
<refentrytitle>kdbus.message</refentrytitle>
@@ -765,7 +764,7 @@ struct kdbus_notify_name_change {
<emphasis>kernel notification</emphasis>. It informs the receiver
that a remote connection a reply is expected from was disconnected
before that reply was sent. The remote peer ID and the message
- cookie is stored in the message header. See
+ cookie are stored in the message header. See
<citerefentry>
<refentrytitle>kdbus.message</refentrytitle>
<manvolnum>7</manvolnum>
diff --git a/Documentation/kdbus/kdbus.match.xml b/Documentation/kdbus/kdbus.match.xml
index ef77b64e5890..ae38e04ab4d6 100644
--- a/Documentation/kdbus/kdbus.match.xml
+++ b/Documentation/kdbus/kdbus.match.xml
@@ -55,7 +55,7 @@
possibly along with some other rules to further limit the match.
The kernel will match the signal message's bloom filter against the
- connections bloom mask (simply by &-ing it), and will decide whether
+ connection's bloom mask (simply by &-ing it), and will decide whether
the message should be delivered to a connection.
</para>
<para>
@@ -138,9 +138,9 @@
<title>Generations</title>
<para>
- Uploaded matches may contain multiple masks, which have are as large as
- the bloom size defined by the bus. Each block of a mask is called a
- <emphasis>generation</emphasis>, starting at index 0.
+ Uploaded matches may contain multiple masks, which have to be as large
+ as the bloom filter size defined by the bus. Each block of a mask is
+ called a <emphasis>generation</emphasis>, starting at index 0.
At match time, when a signal is about to be delivered, a bloom mask
generation is passed, which denotes which of the bloom masks the filter
@@ -171,7 +171,8 @@
<title>Adding a match</title>
<para>
To add a match, the <constant>KDBUS_CMD_MATCH_ADD</constant> ioctl is
- used, which takes a struct of the struct described below.
+ used, which takes a <type>struct kdbus_cmd_match</type> as an argument
+ described below.
Note that each of the items attached to this command will internally
create one match <emphasis>rule</emphasis>, and the collection of them,
@@ -266,7 +267,8 @@ struct kdbus_cmd_match {
An item that carries the bloom filter mask to match against
in its data field. The payload size must match the bloom
filter size that was specified when the bus was created.
- See the section below for more information on bloom filters.
+ See the "Bloom filters" section above for more information on
+ bloom filters.
</para>
</listitem>
</varlistentry>
diff --git a/Documentation/kdbus/kdbus.message.xml b/Documentation/kdbus/kdbus.message.xml
index 5e7c7a3f537e..061a407d50c7 100644
--- a/Documentation/kdbus/kdbus.message.xml
+++ b/Documentation/kdbus/kdbus.message.xml
@@ -344,8 +344,7 @@ struct kdbus_cmd_send {
</variablelist>
<para>
- The fields in this struct are described below.
- The message referenced the <varname>msg_address</varname> above has
+ The message referenced by the <varname>msg_address</varname> above has
the following layout.
</para>
@@ -528,7 +527,7 @@ struct kdbus_msg {
<listitem>
<para>
Actual data records containing the payload. See section
- "Passing of Payload Data".
+ "Message payload".
</para>
</listitem>
</varlistentry>
@@ -707,7 +706,7 @@ struct kdbus_cmd_recv {
<listitem><para>
Whenever a message with <constant>KDBUS_MSG_SIGNAL</constant> is sent
but cannot be queued on a peer (e.g., as it contains FDs but the peer
- does not support FDs, or there is no space left in the peer's pool..)
+ does not support FDs, or there is no space left in the peer's pool)
the 'dropped_msgs' counter of the peer is incremented. On the next
RECV ioctl, the 'dropped_msgs' field is copied into the ioctl struct
and cleared on the peer. If it was non-zero, the
@@ -963,7 +962,7 @@ struct kdbus_msg_info {
<varlistentry>
<term><constant>E2BIG</constant></term>
<listitem><para>
- Too many items
+ Too many items.
</para></listitem>
</varlistentry>
@@ -1172,7 +1171,7 @@ struct kdbus_msg_info {
<varlistentry>
<term><constant>EAGAIN</constant></term>
<listitem><para>
- No message found in the queue
+ No message found in the queue.
</para></listitem>
</varlistentry>
</variablelist>
diff --git a/Documentation/kdbus/kdbus.xml b/Documentation/kdbus/kdbus.xml
index 194abd2e76cc..d8e7400df2af 100644
--- a/Documentation/kdbus/kdbus.xml
+++ b/Documentation/kdbus/kdbus.xml
@@ -379,7 +379,7 @@
<listitem>
<para>
When a message is sent (<constant>KDBUS_CMD_SEND</constant>),
- information about the sending task and the sending connection are
+ information about the sending task and the sending connection is
collected. This metadata will be attached to the message when it
arrives in the receiver's pool. If the connection sending the
message installed faked credentials (see
@@ -514,7 +514,7 @@
To let the kernel know which metadata information to attach as items
to the aforementioned commands, it uses a bitmask. In those, the
following <emphasis>attach flags</emphasis> are currently supported.
- Both the the <varname>attach_flags_recv</varname> and
+ Both the <varname>attach_flags_recv</varname> and
<varname>attach_flags_send</varname> fields of
<type>struct kdbus_cmd_hello</type>, as well as the payload of the
<constant>KDBUS_ITEM_ATTACH_FLAGS_SEND</constant> and
@@ -924,7 +924,7 @@
<para>
These ioctls, along with the structs they transport, are explained in
- detail in the other documents linked to in the 'see also' section below.
+ detail in the other documents linked to in the "See Also" section below.
</para>
</refsect1>
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists