[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFouXDCbPB9Ow6vzRdHdWkscDs3fjThCX69mA97fwZ+Lfw@mail.gmail.com>
Date: Fri, 10 Apr 2015 13:06:01 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Peter Griffin <peter.griffin@...aro.org>
Cc: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Maxime Coquelin <maxime.coquelin@...com>,
Patrice CHOTARD <patrice.chotard@...com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Lee Jones <lee.jones@...aro.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-mmc <linux-mmc@...r.kernel.org>
Subject: Re: [PATCH v5 0/9] Add sd/emmc support for stih407 family silicon
On 10 April 2015 at 11:40, Peter Griffin <peter.griffin@...aro.org> wrote:
> Hi,
>
> This series adds sd/emmc support to the sdhci-st.c driver for stih407
> family silicon. The changes mainly involve configuring some extra glue
> registers in the flashSS which configure the Arasan controller.
>
> This series also adds support for UHS modes for eMMC. To allow
> UHS HS200/SD104 modes to function correctly, due to the
> tight timing constriants, support for delay management is also added.
> Two types of delay management are supported, static delay management and
> dynamic delay management, this delay management is only available
> on eMMC pads on stih410 and later silicon.
>
> This series has been tested with stih410-b2120 revd on eMMC and sd, at
> various clock speeds. As part of this testing a bug was also found in the
> upstream flexgen clock set_rate implementation (now fixed upstream).
>
> max-frequency = 200Mhz
> /dev/mmcblk0p1:
> Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec
>
> max-frequency = 100Mhz
> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec
>
> max-frequency = 50Mhz
> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
> /dev/mmcblk0p1:
> Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec
>
> It has also been tested on stih416-b2020 to ensure we have caused no
> regressions. Finally the dt documentation has been updated to reflect
> the changes in the driver code. Intrestingly it seems we are the first
> upstream platform to be using some of the uhs bindings such as
> sd-uhs-sdr104.
>
> Changes since v4:
> - Fixup typo (Pete)
>
> Changes since v3:
> - Rebased on Ulf's mmc next branch (rc5 based) (Ulf)
>
> Changes since v2:
> - Some whitespace fixups (Max)
> - if (!ioaddr) suggestion (Max)
> - Add stih418-b2199 suport (Max)
> - Stih410 to STiH410 fixes (Max)
> - rebased on v4.0-rc6 (Pete)
>
> Changes since v1:
> - Partition the changes into smaller patches to aid review process (Ulf)
>
> Peter Griffin (9):
> mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss
> glue regs
> mmc: sdhci-st: Add support for de-asserting reset signal and top regs
> resource
> mmc: sdhci-st: Add delay management functions for top registers
> (eMMC).
> mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue
> registers.
> mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.
> mmc: sdhci-st: Update the quirks for this controller.
> mmc: sdhci-st: Update ST SDHCI binding documentation.
> ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.
> ARM: STi: DT: STiH418: Add dt nodes for sdhci and emmc.
>
> Documentation/devicetree/bindings/mmc/sdhci-st.txt | 100 +++++-
> arch/arm/boot/dts/stih407-family.dtsi | 30 ++
> arch/arm/boot/dts/stih410-b2120.dts | 10 +
> arch/arm/boot/dts/stih418-b2199.dts | 12 +
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 +
> drivers/mmc/host/sdhci-st.c | 354 ++++++++++++++++++++-
> 6 files changed, 500 insertions(+), 14 deletions(-)
>
> --
> 1.9.1
>
Thanks! Applied.
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists