| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150410130904.GG3227@hawk.usersys.redhat.com>
Date: Fri, 10 Apr 2015 15:09:05 +0200
From: Andrew Jones <drjones@...hat.com>
To: Alex Bennée <alex.bennee@...aro.org>
Cc: kvm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
kvmarm@...ts.cs.columbia.edu, christoffer.dall@...aro.org,
marc.zyngier@....com, peter.maydell@...aro.org, agraf@...e.de,
pbonzini@...hat.com, zhichao.huang@...aro.org,
jan.kiszka@...mens.com, dahi@...ux.vnet.ibm.com,
r65777@...escale.com, bp@...e.de, Gleb Natapov <gleb@...nel.org>,
Jonathan Corbet <corbet@....net>,
Russell King <linux@....linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
"open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 06/10] KVM: arm64: guest debug, add SW break point
support
On Tue, Mar 31, 2015 at 04:08:04PM +0100, Alex Bennée wrote:
> This adds support for SW breakpoints inserted by userspace.
>
> We do this by trapping all BKPT exceptions in the
> hypervisor (MDCR_EL2_TDE). The kvm_debug_exit_arch carries the address
> of the exception. If user-space doesn't know of the breakpoint then we
> have a guest inserted breakpoint and the hypervisor needs to start again
> and deliver the exception to guest.
>
> Signed-off-by: Alex Bennée <alex.bennee@...aro.org>
>
> ---
> v2
> - update to use new exit struct
> - tweak for C setup
> - do our setup in debug_setup/clear code
> - fixed up comments
>
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 06c5064..17d4f9c 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2626,7 +2626,7 @@ when running. Common control bits are:
> The top 16 bits of the control field are architecture specific control
> flags which can include the following:
>
> - - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86]
> + - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
> - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
> - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
> - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 7ea8b0e..d3bc8dc 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -304,7 +304,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
> kvm_arm_set_running_vcpu(NULL);
> }
>
> -#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE)
> +#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE|KVM_GUESTDBG_USE_SW_BP)
>
> int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
> struct kvm_guest_debug *dbg)
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index 8a29d0b..cff0475 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -45,11 +45,18 @@ void kvm_arch_setup_debug(struct kvm_vcpu *vcpu)
> vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM | MDCR_EL2_TPMCR);
> vcpu->arch.mdcr_el2 |= (MDCR_EL2_TDRA | MDCR_EL2_TDOSA);
>
> + /* Trap debug register access? */
> if (!vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
> vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
> else
> vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
>
> + /* Trap breakpoints? */
> + if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
> + vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
> + else
> + vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
> +
> }
>
> void kvm_arch_clear_debug(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
> index 524fa25..ed1bbb4 100644
> --- a/arch/arm64/kvm/handle_exit.c
> +++ b/arch/arm64/kvm/handle_exit.c
> @@ -82,6 +82,37 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
> return 1;
> }
>
> +/**
> + * kvm_handle_debug_exception - handle a debug exception instruction
> + *
> + * @vcpu: the vcpu pointer
> + * @run: access to the kvm_run structure for results
> + *
> + * We route all debug exceptions through the same handler as we
> + * just need to report the PC and the HSR values to userspace.
> + * Userspace may decide to re-inject the exception and deliver it to
> + * the guest if it wasn't for the host to deal with.
> + */
> +static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
> +{
> + u32 hsr = kvm_vcpu_get_hsr(vcpu);
> +
> + run->exit_reason = KVM_EXIT_DEBUG;
> + run->debug.arch.hsr = hsr;
> +
> + switch (hsr >> ESR_ELx_EC_SHIFT) {
> + case ESR_ELx_EC_BKPT32:
> + case ESR_ELx_EC_BRK64:
> + run->debug.arch.pc = *vcpu_pc(vcpu);
> + break;
> + default:
> + kvm_err("%s: un-handled case hsr: %#08x\n",
> + __func__, (unsigned int) hsr);
> + break;
> + }
> + return 0;
> +}
> +
> static exit_handle_fn arm_exit_handlers[] = {
> [ESR_ELx_EC_WFx] = kvm_handle_wfx,
> [ESR_ELx_EC_CP15_32] = kvm_handle_cp15_32,
> @@ -96,6 +127,8 @@ static exit_handle_fn arm_exit_handlers[] = {
> [ESR_ELx_EC_SYS64] = kvm_handle_sys_reg,
> [ESR_ELx_EC_IABT_LOW] = kvm_handle_guest_abort,
> [ESR_ELx_EC_DABT_LOW] = kvm_handle_guest_abort,
> + [ESR_ELx_EC_BKPT32] = kvm_handle_guest_debug,
> + [ESR_ELx_EC_BRK64] = kvm_handle_guest_debug,
> };
>
> static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
> --
> 2.3.4
>
I agree with David's name change suggestion, "kvm_handle_guest_debug",
otherwise
Reviewed-by: Andrew Jones <drjones@...hat.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists