| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1428638946-24890-4-git-send-email-wens@csie.org>
Date: Fri, 10 Apr 2015 12:09:03 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Lee Jones <lee.jones@...aro.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Cc: Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Carlo Caione <carlo@...one.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
Chen-Yu Tsai <wens@...e.org>
Subject: [PATCH RESEND v6 3/6] regulator: axp20x: prepare support for multiple AXP chip families
From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
Rework the AXP20X_ macros and probe function to support the several chip
families, so that each family can define it's own set of regulators.
Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
[wens@...e.org: Support different DC-DC work frequency ranges]
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Reviewed-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/axp20x-regulator.c | 143 +++++++++++++++++++++++------------
1 file changed, 94 insertions(+), 49 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index e4331f5e5d7d..50ae0b5f2c0c 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -32,15 +32,15 @@
#define AXP20X_FREQ_DCDC_MASK 0x0f
-#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
- _ereg, _emask, _enable_val, _disable_val) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _enable_val, _disable_val) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
@@ -54,15 +54,15 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
- _ereg, _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
@@ -74,29 +74,29 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
.min_uV = (_volt) * 1000, \
.ops = &axp20x_ops_fixed \
}
-#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \
- _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \
+ _ereg, _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
@@ -136,37 +136,57 @@ static struct regulator_ops axp20x_ops = {
};
static const struct regulator_desc axp20x_regulators[] = {
- AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT,
- 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
- AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT,
- 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
- AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300),
- AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
- AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
- AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT,
- 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
- AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
- AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
- AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
- AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
- AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
+ AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
+ AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
+ AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
+ AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
+ AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
+ AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
+ AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
+ AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
+ AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
+ AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
+ AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+ AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
+ AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
+ AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ u32 min, max, def, step;
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ min = 750;
+ max = 1875;
+ def = 1500;
+ step = 75;
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "Setting DCDC frequency for unsupported AXP variant\n");
+ return -EINVAL;
+ }
+
+ if (dcdcfreq == 0)
+ dcdcfreq = def;
- if (dcdcfreq < 750) {
- dcdcfreq = 750;
- dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
+ if (dcdcfreq < min) {
+ dcdcfreq = min;
+ dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
+ min);
}
- if (dcdcfreq > 1875) {
- dcdcfreq = 1875;
- dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
+ if (dcdcfreq > max) {
+ dcdcfreq = max;
+ dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
+ max);
}
- dcdcfreq = (dcdcfreq - 750) / 75;
+ dcdcfreq = (dcdcfreq - min) / step;
return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
@@ -176,7 +196,7 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
{
struct device_node *np, *regulators;
int ret;
- u32 dcdcfreq;
+ u32 dcdcfreq = 0;
np = of_node_get(pdev->dev.parent->of_node);
if (!np)
@@ -186,7 +206,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
- dcdcfreq = 1500;
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
@@ -202,15 +221,27 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
{
- unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
+ struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+ unsigned int mask;
- if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
- return -EINVAL;
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+ return -EINVAL;
+
+ mask = AXP20X_WORKMODE_DCDC2_MASK;
+ if (id == AXP20X_DCDC3)
+ mask = AXP20X_WORKMODE_DCDC3_MASK;
- if (id == AXP20X_DCDC3)
- mask = AXP20X_WORKMODE_DCDC3_MASK;
+ workmode <<= ffs(mask) - 1;
+ break;
- workmode <<= ffs(mask) - 1;
+ default:
+ /* should not happen */
+ WARN_ON(1);
+ return -EINVAL;
+ }
return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
}
@@ -219,22 +250,36 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *regulators;
struct regulator_config config = {
.dev = pdev->dev.parent,
.regmap = axp20x->regmap,
+ .driver_data = axp20x,
};
- int ret, i;
+ int ret, i, nregulators;
u32 workmode;
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ regulators = axp20x_regulators;
+ nregulators = AXP20X_REG_ID_MAX;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
+ axp20x->variant);
+ return -EINVAL;
+ }
+
/* This only sets the dcdc freq. Ignore any errors */
axp20x_regulator_parse_dt(pdev);
- for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
- rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
+ for (i = 0; i < nregulators; i++) {
+ rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
- axp20x_regulators[i].name);
+ regulators[i].name);
return PTR_ERR(rdev);
}
@@ -245,7 +290,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
- axp20x_regulators[i].name);
+ rdev->desc->name);
}
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists