[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1428841494-20769-8-git-send-email-k.kozlowski.k@gmail.com>
Date: Sun, 12 Apr 2015 21:24:54 +0900
From: Krzysztof Kozlowski <k.kozlowski.k@...il.com>
To: Kukjin Kim <kgene@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Krzysztof Kozlowski <k.kozlowski.k@...il.com>
Subject: [PATCH 7/7] ARM: dts: Use phandle notation for overriding nodes in Exynos5440 boards
The phandle notation reduces possible mistakes when overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@...il.com>
---
arch/arm/boot/dts/exynos5440-sd5v1.dts | 10 ++--
arch/arm/boot/dts/exynos5440-ssdk5440.dts | 85 +++++++++++++++----------------
2 files changed, 47 insertions(+), 48 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 268609a42b2c..a98501bab6fc 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -27,13 +27,13 @@
};
};
- gmac: ethernet@...30000 {
- fixed_phy;
- phy_addr = <1>;
- };
-
spi {
status = "disabled";
};
};
+
+&gmac {
+ fixed_phy;
+ phy_addr = <1>;
+};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ff55dac6e219..e4443f4e6572 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -20,59 +20,58 @@
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@...0000000 mem=6144M@...00000000 console=ttySAC0,115200";
};
- spi_0: spi@...00 {
-
- flash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128";
- spi-max-frequency = <15625000>;
- reg = <0>;
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
+ };
+};
- partition@...00 {
- label = "BootLoader";
- reg = <0x60000 0x80000>;
- read-only;
- };
+&pcie_0 {
+ reset-gpio = <&pin_ctrl 5 0>;
+ status = "okay";
+};
- partition@...00 {
- label = "Recovery-Kernel";
- reg = <0xe0000 0x300000>;
- read-only;
- };
+&pcie_1 {
+ reset-gpio = <&pin_ctrl 22 0>;
+ status = "okay";
+};
- partition@...000 {
- label = "CRAM-FS";
- reg = <0x3e0000 0x700000>;
- read-only;
- };
+&spi_0 {
+ flash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128";
+ spi-max-frequency = <15625000>;
+ reg = <0>;
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
- partition@...000 {
- label = "User-Data";
- reg = <0xae0000 0x520000>;
- };
+ partition@...00 {
+ label = "BootLoader";
+ reg = <0x60000 0x80000>;
+ read-only;
+ };
+ partition@...00 {
+ label = "Recovery-Kernel";
+ reg = <0xe0000 0x300000>;
+ read-only;
};
- };
+ partition@...000 {
+ label = "CRAM-FS";
+ reg = <0x3e0000 0x700000>;
+ read-only;
+ };
- fixed-rate-clocks {
- xtal {
- compatible = "samsung,clock-xtal";
- clock-frequency = <50000000>;
+ partition@...000 {
+ label = "User-Data";
+ reg = <0xae0000 0x520000>;
};
- };
- pcie@...000 {
- reset-gpio = <&pin_ctrl 5 0>;
- status = "okay";
};
- pcie@...000 {
- reset-gpio = <&pin_ctrl 22 0>;
- status = "okay";
- };
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists