| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1428961664-4241-3-git-send-email-mateusz.kulikowski@gmail.com> Date: Mon, 13 Apr 2015 23:47:25 +0200 From: Mateusz Kulikowski <mateusz.kulikowski@...il.com> To: gregkh@...uxfoundation.org Cc: Mateusz Kulikowski <mateusz.kulikowski@...il.com>, devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org Subject: [PATCH v2 02/21] staging: rtl8192e: Copy comments from r819XE_phyreg.h to r8192E_phyreg.h Both files have the same contents (with the exception of comments). One of them will not survive future commits. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@...il.com> --- drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h | 92 ++++++++++++++++------- 1 file changed, 65 insertions(+), 27 deletions(-) diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h index d080876..8a1d91e 100644 --- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h +++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h @@ -53,10 +53,10 @@ #define MCS_TXAGC 0x340 #define CCK_TXAGC 0x348 -/*---------------------0x400~0x4ff----------------------*/ +/* Mac block on/off control register */ #define MacBlkCtrl 0x403 -#define rFPGA0_RFMOD 0x800 +#define rFPGA0_RFMOD 0x800 /* RF mode & CCK TxSC */ #define rFPGA0_TxInfo 0x804 #define rFPGA0_PSDFunction 0x808 #define rFPGA0_TxGainStage 0x80c @@ -98,6 +98,7 @@ #define rFPGA0_XAB_RFInterfaceRB 0x8e0 #define rFPGA0_XCD_RFInterfaceRB 0x8e4 +/* Page 9 - RF mode & OFDM TxSC */ #define rFPGA1_RFMOD 0x900 #define rFPGA1_TxBlock 0x904 #define rFPGA1_DebugSelect 0x908 @@ -106,14 +107,16 @@ #define rCCK0_System 0xa00 #define rCCK0_AFESetting 0xa04 #define rCCK0_CCA 0xa08 +/* AGC default value, saturation level */ #define rCCK0_RxAGC1 0xa0c -#define rCCK0_RxAGC2 0xa10 +#define rCCK0_RxAGC2 0xa10 /* AGC & DAGC */ #define rCCK0_RxHP 0xa14 +/* Timing recovery & channel estimation threshold */ #define rCCK0_DSPParameter1 0xa18 -#define rCCK0_DSPParameter2 0xa1c +#define rCCK0_DSPParameter2 0xa1c /* SQ threshold */ #define rCCK0_TxFilter1 0xa20 #define rCCK0_TxFilter2 0xa24 -#define rCCK0_DebugPort 0xa28 +#define rCCK0_DebugPort 0xa28 /* Debug port and TX filter 3 */ #define rCCK0_FalseAlarmReport 0xa2c #define rCCK0_TRSSIReport 0xa50 #define rCCK0_RxReport 0xa54 @@ -124,22 +127,24 @@ #define rOFDM0_TRxPathEnable 0xc04 #define rOFDM0_TRMuxPar 0xc08 #define rOFDM0_TRSWIsolation 0xc0c +/* RxIQ DC offset, Rx digital filter, DC notch filter */ #define rOFDM0_XARxAFE 0xc10 -#define rOFDM0_XARxIQImbalance 0xc14 +#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */ #define rOFDM0_XBRxAFE 0xc18 #define rOFDM0_XBRxIQImbalance 0xc1c #define rOFDM0_XCRxAFE 0xc20 #define rOFDM0_XCRxIQImbalance 0xc24 #define rOFDM0_XDRxAFE 0xc28 #define rOFDM0_XDRxIQImbalance 0xc2c -#define rOFDM0_RxDetector1 0xc30 -#define rOFDM0_RxDetector2 0xc34 -#define rOFDM0_RxDetector3 0xc38 +#define rOFDM0_RxDetector1 0xc30 /* PD, BW & SBD */ +#define rOFDM0_RxDetector2 0xc34 /* SBD */ +#define rOFDM0_RxDetector3 0xc38 /* Frame Sync */ +/* PD, SBD, Frame Sync & Short-GI */ #define rOFDM0_RxDetector4 0xc3c -#define rOFDM0_RxDSP 0xc40 -#define rOFDM0_CFOandDAGC 0xc44 +#define rOFDM0_RxDSP 0xc40 /* Rx Sync Path */ +#define rOFDM0_CFOandDAGC 0xc44 /* CFO & DAGC */ #define rOFDM0_CCADropThreshold 0xc48 -#define rOFDM0_ECCAThreshold 0xc4c +#define rOFDM0_ECCAThreshold 0xc4c /* Energy CCA */ #define rOFDM0_XAAGCCore1 0xc50 #define rOFDM0_XAAGCCore2 0xc54 #define rOFDM0_XBAGCCore1 0xc58 @@ -184,9 +189,9 @@ #define rOFDM1_PseudoNoiseStateAB 0xd50 #define rOFDM1_PseudoNoiseStateCD 0xd54 #define rOFDM1_RxPseudoNoiseWgt 0xd58 -#define rOFDM_PHYCounter1 0xda0 -#define rOFDM_PHYCounter2 0xda4 -#define rOFDM_PHYCounter3 0xda8 +#define rOFDM_PHYCounter1 0xda0 /* cca, parity fail */ +#define rOFDM_PHYCounter2 0xda4 /* rate illegal, crc8 fail */ +#define rOFDM_PHYCounter3 0xda8 /* MCS not supported */ #define rOFDM_ShortCFOAB 0xdac #define rOFDM_ShortCFOCD 0xdb0 #define rOFDM_LongCFOAB 0xdb4 @@ -221,14 +226,17 @@ #define rZebra1_RxLPF 0xb #define rZebra1_RxHPFCorner 0xc +/* Zebra 4 */ #define rGlobalCtrl 0 #define rRTL8256_TxLPF 19 #define rRTL8256_RxLPF 11 +/* RTL8258 */ #define rRTL8258_TxLPF 0x11 #define rRTL8258_RxLPF 0x13 #define rRTL8258_RSSILPF 0xa +/* Bit Mask - Page 1*/ #define bBBResetB 0x100 #define bGlobalResetB 0x200 #define bOFDMTxStart 0x4 @@ -273,7 +281,7 @@ #define bCCKTxCRC16 0xffff #define bCCKTxStatus 0x1 #define bOFDMTxStatus 0x2 - +/* Bit Mask - Page 8 */ #define bRFMOD 0x1 #define bJapanMode 0x2 #define bCCKTxSC 0x30 @@ -290,13 +298,16 @@ #define bRFStart 0x0000f000 #define bBBStart 0x000000f0 #define bBBCCKStart 0x0000000f +/* Bit Mask - rFPGA0_RFTiming2 */ #define bPAEnd 0xf #define bTREnd 0x0f000000 #define bRFEnd 0x000f0000 +/* T2R */ #define bCCAMask 0x000000f0 #define bR2RCCAMask 0x00000f00 #define bHSSI_R2TDelay 0xf8000000 #define bHSSI_T2RDelay 0xf80000 +/* Channel gain at continue TX. */ #define bContTxHSSI 0x400 #define bIGFromCCK 0x200 #define bAGCAddress 0x3f @@ -308,6 +319,7 @@ #define b3WireDataLength 0x800 #define b3WireAddressLength 0x400 #define b3WireRFPowerDown 0x1 +/*#define bHWSISelect 0x8 */ #define b5GPAPEPolarity 0x40000000 #define b2GPAPEPolarity 0x80000000 #define bRFSW_TxDefaultAnt 0x3 @@ -318,6 +330,7 @@ #define bRFSI_3WireClock 0x2 #define bRFSI_3WireLoad 0x4 #define bRFSI_3WireRW 0x8 +/* 3-wire total control */ #define bRFSI_3Wire 0xf #define bRFSI_RFENV 0x10 #define bRFSI_TRSW 0x20 @@ -343,11 +356,11 @@ #define bLSIG_Length 0x1fffe #define bLSIG_Parity 0x20 #define bCCKRxPhase 0x4 -#define bLSSIReadAddress 0x3f000000 -#define bLSSIReadEdge 0x80000000 +#define bLSSIReadAddress 0x3f000000 /* LSSI "read" address */ +#define bLSSIReadEdge 0x80000000 /* LSSI "read" edge signal */ #define bLSSIReadBackData 0xfff #define bLSSIReadOKFlag 0x1000 -#define bCCKSampleRate 0x8 +#define bCCKSampleRate 0x8 /* 0: 44 MHz, 1: 88MHz */ #define bRegulator0Standby 0x1 #define bRegulatorPLLStandby 0x2 @@ -404,10 +417,13 @@ #define bPSDSineToneScale 0x7f000000 #define bPSDReport 0xffff +/* Page 8 */ #define bOFDMTxSC 0x30000000 #define bCCKTxOn 0x1 #define bOFDMTxOn 0x2 +/* Reset debug page and also HWord, LWord */ #define bDebugPage 0xfff +/* Reset debug page and LWord */ #define bDebugItem 0xff #define bAntL 0x10 #define bAntNonHT 0x100 @@ -416,6 +432,7 @@ #define bAntHT1S1 0x100000 #define bAntNonHTS1 0x1000000 +/* Page a */ #define bCCKBBMode 0x3 #define bCCKTxPowerSaving 0x80 #define bCCKRxPowerSaving 0x40 @@ -436,7 +453,7 @@ #define bCCKBistMode 0x80000000 #define bCCKCCAMask 0x40000000 #define bCCKTxDACPhase 0x4 -#define bCCKRxADCPhase 0x20000000 +#define bCCKRxADCPhase 0x20000000 /* r_rx_clk */ #define bCCKr_cp_mode0 0x0100 #define bCCKTxDCOffset 0xf0 #define bCCKRxDCOffset 0xf @@ -450,11 +467,14 @@ #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 +/* CCK Rx Initial gain polarity */ #define bCCKRFExtend 0x20000000 #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 +/* AGCSAmp_dly */ #define bCCKRxRFSettle 0x1f #define bCCKFixedRxAGC 0x8000 +/*#define bCCKRxAGCFormat 0x4000 remove to HSSI register 0x824 */ #define bCCKAntennaPolarity 0x2000 #define bCCKTxFilterType 0x0c00 #define bCCKRxAGCReportType 0x0300 @@ -495,6 +515,7 @@ #define bCCKDefaultRxPath 0xc000000 #define bCCKOptionRxPath 0x3000000 +/* Page c */ #define bNumOfSTF 0x3 #define bShift_L 0xc0 #define bGI_TH 0xc @@ -596,7 +617,9 @@ #define bRxHP_BBP1 0x7000 #define bRxHP_BBP2 0x70000 #define bRxHP_BBP3 0x700000 +/* The threshold for high power */ #define bRSSI_H 0x7f0000 +/* The threshold for ant diversity */ #define bRSSI_Gen 0x7f000000 #define bRxSettle_TRSW 0x7 #define bRxSettle_LNA 0x38 @@ -631,6 +654,7 @@ #define bRxPD_Delay_TH1 0x38 #define bRxPD_Delay_TH2 0x1c0 #define bRxPD_DC_COUNT_MAX 0x600 +/*#define bRxMF_Hold 0x3800*/ #define bRxPD_Delay_TH 0x8000 #define bRxProcess_Delay 0xf0000 #define bRxSearchrange_GI2_Early 0x700000 @@ -656,6 +680,7 @@ #define bExtLNAGain 0x7c00 +/* Page d */ #define bSTBCEn 0x4 #define bAntennaMapping 0x10 #define bNss 0x20 @@ -665,6 +690,13 @@ #define bOFDMContinueTx 0x10000000 #define bOFDMSingleCarrier 0x20000000 #define bOFDMSingleTone 0x40000000 +/* #define bRxPath1 0x01 + * #define bRxPath2 0x02 + * #define bRxPath3 0x04 + * #define bRxPath4 0x08 + * #define bTxPath1 0x10 + * #define bTxPath2 0x20 +*/ #define bHTDetect 0x100 #define bCFOEn 0x10000 #define bCFOValue 0xfff00000 @@ -677,8 +709,8 @@ #define bCounter_MCSNoSupport 0xffff #define bCounter_FastSync 0xffff #define bShortCFO 0xfff -#define bShortCFOTLength 12 -#define bShortCFOFLength 11 +#define bShortCFOTLength 12 /* total */ +#define bShortCFOFLength 11 /* fraction */ #define bLongCFO 0x7ff #define bLongCFOTLength 11 #define bLongCFOFLength 11 @@ -755,6 +787,7 @@ #define bUChCfg 0x7000000 #define bUpdEqz 0x8000000 +/* Page e */ #define bTxAGCRate18_06 0x7f7f7f7f #define bTxAGCRate54_24 0x7f7f7f7f #define bTxAGCRateMCS32 0x7f @@ -764,8 +797,7 @@ #define bTxAGCRateMCS11_MCS8 0x7f7f7f7f #define bTxAGCRateMCS15_MCS12 0x7f7f7f7f - -#define bRxPesudoNoiseOn 0x20000000 +#define bRxPesudoNoiseOn 0x20000000 /* Rx Pseduo noise */ #define bRxPesudoNoise_A 0xff #define bRxPesudoNoise_B 0xff00 #define bRxPesudoNoise_C 0xff0000 @@ -775,6 +807,7 @@ #define bPesudoNoiseState_C 0xffff #define bPesudoNoiseState_D 0xffff0000 +/* RF Zebra 1 */ #define bZebra1_HSSIEnable 0x8 #define bZebra1_TRxControl 0xc00 #define bZebra1_TRxGainSetting 0x07f @@ -785,15 +818,18 @@ #define bZebra1_TxLPFBW 0x400 #define bZebra1_RxLPFBW 0x600 +/* Zebra4 */ #define bRTL8256RegModeCtrl1 0x100 #define bRTL8256RegModeCtrl0 0x40 #define bRTL8256_TxLPFBW 0x18 #define bRTL8256_RxLPFBW 0x600 +/* RTL8258 */ #define bRTL8258_TxLPFBW 0xc #define bRTL8258_RxLPFBW 0xc00 #define bRTL8258_RSSILPFBW 0xc0 +/* byte enable for sb_write */ #define bByte0 0x1 #define bByte1 0x2 #define bByte2 0x4 @@ -802,6 +838,7 @@ #define bWord1 0xc #define bDWord 0xf +/* for PutRegsetting & GetRegSetting BitMask */ #define bMaskByte0 0xff #define bMaskByte1 0xff00 #define bMaskByte2 0xff0000 @@ -810,6 +847,7 @@ #define bMaskLWord 0x0000ffff #define bMaskDWord 0xffffffff +/* for PutRFRegsetting & GetRFRegSetting BitMask */ #define bMask12Bits 0xfff #define bEnable 0x1 @@ -818,14 +856,14 @@ #define LeftAntenna 0x0 #define RightAntenna 0x1 -#define tCheckTxStatus 500 -#define tUpdateRxCounter 100 +#define tCheckTxStatus 500 /* 500 ms */ +#define tUpdateRxCounter 100 /* 100 ms */ #define rateCCK 0 #define rateOFDM 1 #define rateHT 2 -#define bPMAC_End 0x1ff +#define bPMAC_End 0x1ff /* define Register-End */ #define bFPGAPHY0_End 0x8ff #define bFPGAPHY1_End 0x9ff #define bCCKPHY0_End 0xaff -- 1.8.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists