[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1428978610-28986-31-git-send-email-jiang.liu@linux.intel.com>
Date: Tue, 14 Apr 2015 10:30:07 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Randy Dunlap <rdunlap@...radead.org>,
Yinghai Lu <yinghai@...nel.org>,
Borislav Petkov <bp@...en8.de>,
Dimitri Sivanich <sivanich@....com>, x86@...nel.org,
Jiang Liu <jiang.liu@...ux.intel.com>,
Grant Likely <grant.likely@...aro.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
David Cohen <david.a.cohen@...ux.intel.com>,
Sander Eikelenboom <linux@...elenboom.it>,
David Vrabel <david.vrabel@...rix.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Tony Luck <tony.luck@...el.com>,
Joerg Roedel <joro@...tes.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-acpi@...r.kernel.org
Subject: [Patch Part2 v5 30/33] x86,ioapic: Cleanup irq_trigger/polarity()
From: Thomas Gleixner <tglx@...utronix.de>
These functions are full of pointless indentations, useless comments
and even more useless printks.
Clean them up.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Cc: Jiang Liu <jiang.liu@...ux.intel.com>
Cc: x86@...nel.org
Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
arch/x86/kernel/apic/io_apic.c | 138 +++++++++++++++-------------------------
1 file changed, 50 insertions(+), 88 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index cf42a6adf9c0..ce7063087f74 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -796,45 +796,47 @@ static int EISA_ELCR(unsigned int irq)
static int irq_polarity(int idx)
{
int bus = mp_irqs[idx].srcbus;
- int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].irqflag & 3)
- {
- case 0: /* conforms, ie. bus-type dependent polarity */
- if (test_bit(bus, mp_bus_not_pci))
- polarity = default_ISA_polarity(idx);
- else
- polarity = default_PCI_polarity(idx);
- break;
- case 1: /* high active */
- {
- polarity = IOAPIC_POL_HIGH;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- polarity = IOAPIC_POL_LOW;
- break;
- }
- case 3: /* low active */
- {
- polarity = IOAPIC_POL_LOW;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- polarity = IOAPIC_POL_LOW;
- break;
- }
+ switch (mp_irqs[idx].irqflag & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent polarity */
+ if (test_bit(bus, mp_bus_not_pci))
+ return default_ISA_polarity(idx);
+ else
+ return default_PCI_polarity(idx);
+ case 1:
+ return IOAPIC_POL_HIGH;
+ case 2:
+ pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_POL_LOW;
}
- return polarity;
}
+#ifdef CONFIG_EISA
+static int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ switch (mp_bus_id_to_type[bus]) {
+ case MP_BUS_PCI:
+ case MP_BUS_ISA:
+ return trigger;
+ case MP_BUS_EISA:
+ return default_EISA_trigger(idx);
+ }
+ pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
+ return IOAPIC_LEVEL;
+}
+#else
+static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+ return trigger;
+}
+#endif
+
static int irq_trigger(int idx)
{
int bus = mp_irqs[idx].srcbus;
@@ -843,63 +845,23 @@ static int irq_trigger(int idx)
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].irqflag>>2) & 3)
- {
- case 0: /* conforms, ie. bus-type dependent */
- if (test_bit(bus, mp_bus_not_pci))
- trigger = default_ISA_trigger(idx);
- else
- trigger = default_PCI_trigger(idx);
-#ifdef CONFIG_EISA
- switch (mp_bus_id_to_type[bus]) {
- case MP_BUS_ISA: /* ISA pin */
- {
- /* set before the switch */
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- trigger = default_EISA_trigger(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /* set before the switch */
- break;
- }
- default:
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_LEVEL;
- break;
- }
- }
-#endif
- break;
- case 1: /* edge */
- {
- trigger = IOAPIC_EDGE;
- break;
- }
- case 2: /* reserved */
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_LEVEL;
- break;
- }
- case 3: /* level */
- {
- trigger = IOAPIC_LEVEL;
- break;
- }
- default: /* invalid */
- {
- pr_warn("broken BIOS!!\n");
- trigger = IOAPIC_EDGE;
- break;
- }
+ switch ((mp_irqs[idx].irqflag >> 2) & 0x03) {
+ case 0:
+ /* conforms to spec, ie. bus-type dependent trigger mode */
+ if (test_bit(bus, mp_bus_not_pci))
+ trigger = default_ISA_trigger(idx);
+ else
+ trigger = default_PCI_trigger(idx);
+ /* Take EISA into account */
+ return eisa_irq_trigger(idx, bus, trigger);
+ case 1:
+ return IOAPIC_EDGE;
+ case 2:
+ pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
+ case 3:
+ default: /* Pointless default required due to do gcc stupidity */
+ return IOAPIC_LEVEL;
}
- return trigger;
}
void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists