| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150416121211.GH3181@shlinux2>
Date: Thu, 16 Apr 2015 20:12:12 +0800
From: Peter Chen <peter.chen@...escale.com>
To: Roger Quadros <rogerq@...com>
CC: <gregkh@...uxfoundation.org>, <balbi@...com>,
<stern@...land.harvard.edu>, <dan.j.williams@...el.com>,
<jun.li@...escale.com>, <mathias.nyman@...ux.intel.com>,
<tony@...mide.com>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>
Subject: Re: [RFC][PATCH v2 04/13] usb: gadget: add usb_gadget_start/stop()
On Thu, Apr 16, 2015 at 03:07:41PM +0300, Roger Quadros wrote:
> On 16/04/15 14:48, Peter Chen wrote:
> > On Tue, Apr 14, 2015 at 01:41:51PM +0300, Roger Quadros wrote:
> >> The OTG state machine needs a mechanism to start and
> >> stop the gadget controller. Add usb_gadget_start()
> >> and usb_gadget_stop().
> >>
> >> Signed-off-by: Roger Quadros <rogerq@...com>
> >> ---
> >> drivers/usb/gadget/udc/udc-core.c | 74 +++++++++++++++++++++++++++++++++++++++
> >> include/linux/usb/gadget.h | 3 ++
> >> 2 files changed, 77 insertions(+)
> >>
> >> diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
> >> index 5a81cb0..3aa5dd5 100644
> >> --- a/drivers/usb/gadget/udc/udc-core.c
> >> +++ b/drivers/usb/gadget/udc/udc-core.c
> >> @@ -187,6 +187,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
> >> */
> >> static inline int usb_gadget_udc_start(struct usb_udc *udc)
> >> {
> >> + dev_dbg(&udc->dev, "%s\n", __func__);
> >> return udc->gadget->ops->udc_start(udc->gadget, udc->driver);
> >> }
> >>
> >> @@ -204,10 +205,83 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
> >> */
> >> static inline void usb_gadget_udc_stop(struct usb_udc *udc)
> >> {
> >> + dev_dbg(&udc->dev, "%s\n", __func__);
> >> udc->gadget->ops->udc_stop(udc->gadget);
> >> }
> >>
> >> /**
> >> + * usb_gadget_start - start the usb gadget controller and connect to bus
> >> + * @gadget: the gadget device to start
> >> + *
> >> + * This is external API for use by OTG core.
> >> + *
> >> + * Start the usb device controller and connect to bus (enable pull).
> >> + */
> >> +int usb_gadget_start(struct usb_gadget *gadget)
> >> +{
> >> + int ret;
> >> + struct usb_udc *udc = NULL;
> >> +
> >> + dev_dbg(&gadget->dev, "%s\n", __func__);
> >> + mutex_lock(&udc_lock);
> >> + list_for_each_entry(udc, &udc_list, list)
> >> + if (udc->gadget == gadget)
> >> + goto found;
> >> +
> >> + dev_err(gadget->dev.parent, "%s: gadget not registered.\n",
> >> + __func__);
> >> + mutex_unlock(&udc_lock);
> >> + return -EINVAL;
> >> +
> >> +found:
> >> + ret = usb_gadget_udc_start(udc);
> >> + if (ret)
> >> + dev_err(&udc->dev, "USB Device Controller didn't start: %d\n",
> >> + ret);
> >> + else
> >> + usb_gadget_connect(udc->gadget);
> >
> > OTG FSM manages its pullup/pulldown itself through its fsm->ops->loc_conn
>
> That API usb_gadget_udc_start() is used by DRD (dual-role) FSM as well
> and it doesn't use ops->loc_conn. So i'm wondering how to make this work for
> both.
>
> I could probably remove the pull up control from usb_gadget_start/stop()
> and move it into the DRD FSM.
>
Just like I comment your at your 5th patch, if we want both DRD and OTG FSM
devices run the same code. From our experience, it can cover both at
runtime if we can handle otg descriptor well (no otg descriptor for
DRD device).
Peter
>
> >
> >> +
> >> + mutex_unlock(&udc_lock);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(usb_gadget_start);
> >> +
> >> +/**
> >> + * usb_gadget_stop - disconnect from bus and stop the usb gadget
> >> + * @gadget: The gadget device we want to stop
> >> + *
> >> + * This is external API for use by OTG core.
> >> + *
> >> + * Disconnect from the bus (disable pull) and stop the
> >> + * gadget controller.
> >> + */
> >> +int usb_gadget_stop(struct usb_gadget *gadget)
> >> +{
> >> + struct usb_udc *udc = NULL;
> >> +
> >> + dev_dbg(&gadget->dev, "%s\n", __func__);
> >> + mutex_lock(&udc_lock);
> >> + list_for_each_entry(udc, &udc_list, list)
> >> + if (udc->gadget == gadget)
> >> + goto found;
> >> +
> >> + dev_err(gadget->dev.parent, "%s: gadget not registered.\n",
> >> + __func__);
> >> + mutex_unlock(&udc_lock);
> >> + return -EINVAL;
> >> +
> >> +found:
> >> + usb_gadget_disconnect(udc->gadget);
> >> + udc->driver->disconnect(udc->gadget);
> >> + usb_gadget_udc_stop(udc);
> >> + mutex_unlock(&udc_lock);
> >> +
> >> + return 0;
> >> +}
> >> +EXPORT_SYMBOL_GPL(usb_gadget_stop);
> >> +
> >> +/**
> >> * usb_udc_release - release the usb_udc struct
> >> * @dev: the dev member within usb_udc
> >> *
> >> diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
> >> index e2f00fd..7ada7e6 100644
> >> --- a/include/linux/usb/gadget.h
> >> +++ b/include/linux/usb/gadget.h
> >> @@ -922,6 +922,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
> >> */
> >> int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
> >>
> >> +int usb_gadget_start(struct usb_gadget *gadget);
> >> +int usb_gadget_stop(struct usb_gadget *gadget);
> >> +
> >> extern int usb_add_gadget_udc_release(struct device *parent,
> >> struct usb_gadget *gadget, void (*release)(struct device *dev));
> >> extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
> >> --
> >> 2.1.0
> >>
> >
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists