linux-kernel - Re: [PATCH net 0/5] stmmac: Correct flow control configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <552F6352.1020601@st.com>
Date:	Thu, 16 Apr 2015 09:22:58 +0200
From:	Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:	Vince Bridgers <vbridger@...nsource.altera.com>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:	<vbridger@...era.com>
Subject: Re: [PATCH net 0/5] stmmac: Correct flow control configuration

Hi Vince

On 4/15/2015 6:17 PM, Vince Bridgers wrote:
> This series of patches corrects flow control configuration for the Synopsys
> GMAC driver.

Thx for these patches

For the series

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@...com>

peppe

>
> Flow control is configured based on a configurable receive fifo size. If
> less than 4Kbytes flow control is left disabled and a warning is presented. If
> a receive fifo size is not specified, flow control is left disabled to
> maintain current behavior. Unicast pause detection was disabled, but is now
> enabled. The pause time was modified to be maximum time per a XON/XOFF
> flow control mode of operation.
>
> This patch was tested on an Altera Cyclone 5 and an Altera Arria 10 devkit,
> and verified that flow control operates as expected when enabled.
>
> Please consider this series for inclusion so that flow control will
> function as expected for the Synopsys GMAC controller.
>
> Vince Bridgers (5):
>    stmmac: Add properties for transmit and receive fifo sizes
>    stmmac: Add defines and documentation for enabling flow control
>    stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree
>    stmmac: Enable unicast pause frame detect in GMAC Register 6
>    stmmac: Configure Flow Control to work correctly based on rxfifo size
>
>   Documentation/devicetree/bindings/net/ethernet.txt |  6 +++
>   Documentation/devicetree/bindings/net/stmmac.txt   |  4 ++
>   drivers/net/ethernet/stmicro/stmmac/common.h       |  5 ++-
>   drivers/net/ethernet/stmicro/stmmac/dwmac1000.h    | 51 ++++++++++++++++++++++
>   .../net/ethernet/stmicro/stmmac/dwmac1000_core.c   |  5 ++-
>   .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c    | 26 ++++++++++-
>   drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c |  2 +-
>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 16 ++++---
>   .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  4 ++
>   include/linux/stmmac.h                             |  2 +
>   10 files changed, 111 insertions(+), 10 deletions(-)
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/