Message-ID: <7acb2e683450a608adf81e6b820e62b523429101.1429280614.git.stwiss.opensource@diasemi.com>
Date:	Fri, 17 Apr 2015 15:23:32 +0100
From:	S Twiss <stwiss.opensource@...semi.com>
To:	LINUXKERNEL <linux-kernel@...r.kernel.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>
CC:	Alessandro Zummo <a.zummo@...ertech.it>,
	DEVICETREE <devicetree@...r.kernel.org>,
	David Dajun Chen <david.chen@...semi.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	LINUXINPUT <linux-input@...r.kernel.org>,
	LINUXWATCHDOG <linux-watchdog@...r.kernel.org>,
	Lee Jones <lee.jones@...aro.org>,
	Mark Rutland <mark.rutland@....com>,
	Pawel Moll <pawel.moll@....com>,
	RTCLINUX <rtc-linux@...glegroups.com>,
	Rob Herring <robh+dt@...nel.org>,
	S Twiss <stwiss.opensource@...semi.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Support Opensource <support.opensource@...semi.com>,
	Wim Van Sebroeck <wim@...ana.be>
Subject: [PATCH V1 2/6] regulator: da9062: DA9062 regulator driver

From: S Twiss <stwiss.opensource@...semi.com>

Add BUCK and LDO regulator driver support for DA9062

Signed-off-by: Steve Twiss <stwiss.opensource@...semi.com>

---

This patch applies against linux-next and v4.0 



 drivers/regulator/Kconfig            |  10 +
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/da9062-regulator.c | 968 +++++++++++++++++++++++++++++++++++
 3 files changed, 979 insertions(+)
 create mode 100644 drivers/regulator/da9062-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a6f116a..1fd6dc3 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -178,6 +178,16 @@ config REGULATOR_DA9055
 	  This driver can also be built as a module. If so, the module
 	  will be called da9055-regulator.
 
+config REGULATOR_DA9062
+	tristate "Dialog Semiconductor DA9062 regulators"
+	depends on MFD_DA9062
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  DA9062 PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9062-regulator.
+
 config REGULATOR_DA9063
 	tristate "Dialog Semiconductor DA9063 regulators"
 	depends on MFD_DA9063
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2c4da15..12ecb65 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
+obj-$(CONFIG_REGULATOR_DA9062)	+= da9062-regulator.o
 obj-$(CONFIG_REGULATOR_DA9063)	+= da9063-regulator.o
 obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
 obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
new file mode 100644
index 0000000..503e395
--- /dev/null
+++ b/drivers/regulator/da9062-regulator.c
@@ -0,0 +1,968 @@
+/*
+ * da9062-regulator.c - REGULATOR device driver for DA9062
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+/* Regulator IDs */
+enum {
+	DA9062_ID_BUCK1,
+	DA9062_ID_BUCK2,
+	DA9062_ID_BUCK3,
+	DA9062_ID_BUCK4,
+	DA9062_ID_LDO1,
+	DA9062_ID_LDO2,
+	DA9062_ID_LDO3,
+	DA9062_ID_LDO4,
+};
+
+/* Regulator capabilities and registers description */
+struct da9062_regulator_info {
+	struct regulator_desc desc;
+	/* Current limiting */
+	unsigned int n_current_limits;
+	const int *current_limits;
+	/* Main register fields */
+	struct reg_field mode;
+	struct reg_field suspend;
+	struct reg_field sleep;
+	struct reg_field suspend_sleep;
+	unsigned int suspend_vsel_reg;
+	struct reg_field ilimit;
+	/* Event detection bit */
+	struct reg_field oc_event;
+};
+
+/* Single regulator settings */
+struct da9062_regulator {
+	struct regulator_desc			desc;
+	struct regulator_dev			*rdev;
+	struct da9062				*hw;
+	const struct da9062_regulator_info	*info;
+
+	struct regmap_field			*mode;
+	struct regmap_field			*suspend;
+	struct regmap_field			*sleep;
+	struct regmap_field			*suspend_sleep;
+	struct regmap_field			*ilimit;
+};
+
+/* Encapsulates all information for the regulators driver */
+struct da9062_regulators {
+	int					irq_ldo_lim;
+	int					irq_vdd_warn;
+	unsigned				n_regulators;
+	/* Array size to be defined during init. Keep at end. */
+	struct da9062_regulator			regulator[0];
+};
+
+/* BUCK modes */
+enum {
+	BUCK_MODE_MANUAL,	/* 0 */
+	BUCK_MODE_SLEEP,	/* 1 */
+	BUCK_MODE_SYNC,		/* 2 */
+	BUCK_MODE_AUTO		/* 3 */
+};
+
+/* Regulator operations */
+
+/* Current limits array (in uA) BUCK1 and BUCK3.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_a_limits[] = {
+	 500000,  600000,  700000,  800000,  900000, 1000000, 1100000, 1200000,
+	1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
+};
+
+/* Current limits array (in uA) for BUCK2.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_b_limits[] = {
+	1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
+	2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
+};
+
+static int da9062_set_current_limit(struct regulator_dev *rdev,
+				    int min_ua, int max_ua)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int n, tval;
+
+	for (n = 0; n < rinfo->n_current_limits; n++) {
+		tval = rinfo->current_limits[n];
+		if (tval >= min_ua && tval <= max_ua)
+			return regmap_field_write(regl->ilimit, n);
+	}
+
+	return -EINVAL;
+}
+
+static int da9062_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	unsigned int sel;
+	int ret;
+
+	ret = regmap_field_read(regl->ilimit, &sel);
+	if (ret < 0)
+		return ret;
+
+	if (sel >= rinfo->n_current_limits)
+		sel = rinfo->n_current_limits - 1;
+
+	return rinfo->current_limits[sel];
+}
+
+static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+/*
+ * Bucks use single mode register field for normal operation
+ * and suspend state.
+ * There are 3 modes to map to: FAST, NORMAL, and STANDBY.
+ */
+
+static unsigned da9062_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	unsigned int val, mode = 0;
+	int ret;
+
+	ret = regmap_field_read(regl->mode, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (val) {
+	default:
+	case BUCK_MODE_MANUAL:
+		mode = REGULATOR_MODE_FAST | REGULATOR_MODE_STANDBY;
+		/* Sleep flag bit decides the mode */
+		break;
+	case BUCK_MODE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	case BUCK_MODE_SYNC:
+		return REGULATOR_MODE_FAST;
+	case BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	}
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		mode &= REGULATOR_MODE_STANDBY;
+	else
+		mode &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_FAST;
+
+	return mode;
+}
+
+/*
+ * LDOs use sleep flags - one for normal and one for suspend state.
+ * There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state.
+ */
+
+static int da9062_ldo_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->sleep, val);
+}
+
+static unsigned da9062_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	int ret, val;
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int da9062_buck_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_buck_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_ldo_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_ldo_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int ret, sel;
+
+	sel = regulator_map_voltage_linear(rdev, uv, uv);
+	if (sel < 0)
+		return sel;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+	ret = regmap_update_bits(regl->hw->regmap, rinfo->suspend_vsel_reg,
+				 rdev->desc->vsel_mask, sel);
+
+	return ret;
+}
+
+static int da9062_suspend_enable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 1);
+}
+
+static int da9062_suspend_disable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 0);
+}
+
+static int da9062_buck_set_suspend_mode(struct regulator_dev *rdev,
+					unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
+						unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->suspend_sleep, val);
+}
+
+static struct regulator_ops da9062_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_current_limit	= da9062_set_current_limit,
+	.get_current_limit	= da9062_get_current_limit,
+	.set_mode		= da9062_buck_set_mode,
+	.get_mode		= da9062_buck_get_mode,
+	.get_status		= da9062_buck_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_buck_set_suspend_mode,
+};
+
+static struct regulator_ops da9062_ldo_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_mode		= da9062_ldo_set_mode,
+	.get_mode		= da9062_ldo_get_mode,
+	.get_status		= da9062_ldo_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_ldo_set_suspend_mode,
+};
+
+/* Regulator information */
+static const struct da9062_regulator_info local_regulator_info[] = {
+	{
+		.desc.id = DA9062_ID_BUCK1,
+		.desc.name = "DA9062 BUCK1",
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK1_CONT,
+		.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK1_A,
+		.desc.vsel_mask = DA9062AA_VBUCK1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK1_A,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK1_B,
+		.mode = REG_FIELD(DA9062AA_BUCK1_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK2,
+		.desc.name = "DA9062 BUCK2",
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK2_CONT,
+		.desc.enable_mask = DA9062AA_BUCK2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK2_A,
+		.desc.vsel_mask = DA9062AA_VBUCK2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK2_A,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK2_B,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK2_B,
+		.mode = REG_FIELD(DA9062AA_BUCK2_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK2_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK2_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK3,
+		.desc.name = "DA9062 BUCK3",
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (800) * 1000,
+		.desc.uV_step = (20) * 1000,
+		.desc.n_voltages = ((3340) - (800))/(20) + 1,
+		.current_limits = da9062_buck_b_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+		.desc.enable_reg = DA9062AA_BUCK3_CONT,
+		.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK3_A,
+		.desc.vsel_mask = DA9062AA_VBUCK3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK3_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK3_B,
+		.mode = REG_FIELD(DA9062AA_BUCK3_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK4,
+		.desc.name = "DA9062 BUCK4",
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (530) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1800) - (530))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK4_CONT,
+		.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK4_A,
+		.desc.vsel_mask = DA9062AA_VBUCK4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK4_A,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK4_B,
+		.mode = REG_FIELD(DA9062AA_BUCK4_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO1,
+		.desc.name = "DA9062 LDO1",
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO1_CONT,
+		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO1_A,
+		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO1_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO2,
+		.desc.name = "DA9062 LDO2",
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO2_CONT,
+		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO2_A,
+		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO2_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO3,
+		.desc.name = "DA9062 LDO3",
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO3_CONT,
+		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO3_A,
+		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO3_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO4,
+		.desc.name = "DA9062 LDO4",
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO4_CONT,
+		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO4_A,
+		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO4_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1),
+	},
+};
+
+/* Regulator interrupt handlers */
+static irqreturn_t da9062_ldo_lim_event(int irq, void *data)
+{
+	struct da9062_regulators *regulators = data;
+	struct da9062 *hw = regulators->regulator[0].hw;
+	struct da9062_regulator *regl;
+	int bits, i, ret;
+
+	ret = regmap_read(hw->regmap, DA9062AA_STATUS_D, &bits);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = regulators->n_regulators - 1; i >= 0; i--) {
+		regl = &regulators->regulator[i];
+		if (regl->info->oc_event.reg != DA9062AA_STATUS_D)
+			continue;
+
+		if (BIT(regl->info->oc_event.lsb) & bits)
+			regulator_notifier_call_chain(regl->rdev,
+					REGULATOR_EVENT_OVER_CURRENT, NULL);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t da9062_vdd_warn_event(int irq, void *data)
+{
+	return IRQ_HANDLED;
+}
+
+/* Regulators platform data */
+struct da9062_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+struct da9062_regulators_pdata {
+	unsigned			n_regulators;
+	struct da9062_regulator_data	*regulator_data;
+};
+
+/*
+ * Probing and Initialisation functions
+ */
+static const struct regulator_init_data *da9062_get_regulator_initdata(
+		const struct da9062_regulators_pdata *pdata, int id)
+{
+	int i;
+
+	for (i = 0; i < pdata->n_regulators; i++) {
+		if (id == pdata->regulator_data[i].id)
+			return pdata->regulator_data[i].initdata;
+	}
+
+	return NULL;
+}
+
+#ifdef CONFIG_OF
+static struct of_regulator_match da9062_matches[] = {
+	[DA9062_ID_BUCK1] = { .name = "buck1" },
+	[DA9062_ID_BUCK2] = { .name = "buck2" },
+	[DA9062_ID_BUCK3] = { .name = "buck3" },
+	[DA9062_ID_BUCK4] = { .name = "buck4" },
+	[DA9062_ID_LDO1]  = { .name = "ldo1"  },
+	[DA9062_ID_LDO2]  = { .name = "ldo2"  },
+	[DA9062_ID_LDO3]  = { .name = "ldo3"  },
+	[DA9062_ID_LDO4]  = { .name = "ldo4"  },
+};
+
+static struct da9062_regulators_pdata *da9062_parse_regulators_dt(
+		struct platform_device *pdev,
+		struct of_regulator_match **reg_matches)
+{
+	struct da9062_regulators_pdata *pdata;
+	struct da9062_regulator_data *rdata;
+	struct device_node *node;
+	int i, n, num;
+
+	node = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
+	if (!node) {
+		dev_err(&pdev->dev, "Regulators device node not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	num = of_regulator_match(&pdev->dev, node, da9062_matches,
+				 ARRAY_SIZE(da9062_matches));
+	of_node_put(node);
+	if (num < 0) {
+		dev_err(&pdev->dev, "Failed to match regulators\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->regulator_data = devm_kzalloc(&pdev->dev,
+					num * sizeof(*pdata->regulator_data),
+					GFP_KERNEL);
+	if (!pdata->regulator_data)
+		return ERR_PTR(-ENOMEM);
+	pdata->n_regulators = num;
+
+	n = 0;
+	for (i = 0; i < ARRAY_SIZE(da9062_matches); i++) {
+		if (!da9062_matches[i].init_data)
+			continue;
+
+		rdata = &pdata->regulator_data[n];
+		rdata->id = i;
+		rdata->initdata = da9062_matches[i].init_data;
+
+		n++;
+	};
+
+	*reg_matches = da9062_matches;
+	return pdata;
+}
+#else
+static struct da9062_regulators_pdata *da9062_parse_regulators_dt(
+		struct platform_device *pdev,
+		struct of_regulator_match **reg_matches)
+{
+	*reg_matches = NULL;
+	return ERR_PTR(-ENODEV);
+}
+#endif
+
+static int da9062_regulator_probe(struct platform_device *pdev)
+{
+	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
+	struct of_regulator_match *reg_matches = NULL;
+	struct da9062_regulators_pdata *pdata;
+	struct da9062_regulators *regulators;
+	struct da9062_regulator *regl;
+	struct regulator_config config;
+	int id, irq, n, n_regulators, ret;
+	size_t size;
+
+	pdata = da9062_parse_regulators_dt(pdev, &reg_matches);
+
+	if (IS_ERR(pdata) || pdata->n_regulators == 0) {
+		dev_err(&pdev->dev,
+			"No regulators defined for the platform\n");
+		return PTR_ERR(pdata);
+	}
+
+	n_regulators = ARRAY_SIZE(local_regulator_info),
+
+	/* Allocate memory required by usable regulators */
+	size = sizeof(struct da9062_regulators) +
+		n_regulators * sizeof(struct da9062_regulator);
+	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!regulators)
+		return -ENOMEM;
+
+	regulators->n_regulators = n_regulators;
+	platform_set_drvdata(pdev, regulators);
+
+	/* Register all regulators declared in platform information */
+	n = 0;
+	id = 0;
+	while (n < regulators->n_regulators) {
+		/* Initialise regulator structure */
+		regl = &regulators->regulator[n];
+		regl->hw = chip;
+		regl->info = &local_regulator_info[id];
+		regl->desc = regl->info->desc;
+		regl->desc.type = REGULATOR_VOLTAGE;
+		regl->desc.owner = THIS_MODULE;
+
+		if (regl->info->mode.reg)
+			regl->mode = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->mode);
+		if (regl->info->suspend.reg)
+			regl->suspend = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend);
+		if (regl->info->sleep.reg)
+			regl->sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->sleep);
+		if (regl->info->suspend_sleep.reg)
+			regl->suspend_sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend_sleep);
+		if (regl->info->ilimit.reg)
+			regl->ilimit = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->ilimit);
+
+		/* Register regulator */
+		memset(&config, 0, sizeof(config));
+		config.dev = &pdev->dev;
+		config.init_data = da9062_get_regulator_initdata(pdata, id);
+		config.driver_data = regl;
+		if (reg_matches)
+			config.of_node = reg_matches[id].of_node;
+		config.regmap = chip->regmap;
+		regl->rdev = devm_regulator_register(&pdev->dev, &regl->desc,
+						     &config);
+		if (IS_ERR(regl->rdev)) {
+			dev_err(&pdev->dev,
+				"Failed to register %s regulator\n",
+				regl->desc.name);
+			return PTR_ERR(regl->rdev);
+		}
+		id++;
+		n++;
+	}
+
+	/* LDOs overcurrent event support */
+	irq = platform_get_irq_byname(pdev, "LDO_LIM");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+		return irq;
+	}
+	regulators->irq_ldo_lim = irq;
+
+	ret = request_threaded_irq(irq,
+				   NULL, da9062_ldo_lim_event,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "LDO_LIM", regulators);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			 "Failed to request LDO_LIM IRQ.\n");
+		regulators->irq_ldo_lim = -ENXIO;
+	}
+
+	/* VDD WARN event support */
+	irq = platform_get_irq_byname(pdev, "VDD_WARN");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+		free_irq(regulators->irq_ldo_lim, regulators);
+		return irq;
+	}
+	regulators->irq_vdd_warn = irq;
+
+	ret = request_threaded_irq(irq,
+				   NULL, da9062_vdd_warn_event,
+				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				   "VDD_WARN", regulators);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			 "Failed to request VDD_WARN IRQ.\n");
+		regulators->irq_vdd_warn = -ENXIO;
+	}
+
+	return 0;
+}
+
+static int da9062_regulator_remove(struct platform_device *pdev)
+{
+	struct da9062_regulators *regulators = platform_get_drvdata(pdev);
+
+	free_irq(regulators->irq_ldo_lim, regulators);
+	free_irq(regulators->irq_vdd_warn, regulators);
+
+	return 0;
+}
+
+static struct platform_driver da9062_regulator_driver = {
+	.driver = {
+		.name = "da9062-regulators",
+		.owner = THIS_MODULE,
+	},
+	.probe = da9062_regulator_probe,
+	.remove = da9062_regulator_remove,
+};
+
+static int __init da9062_regulator_init(void)
+{
+	return platform_driver_register(&da9062_regulator_driver);
+}
+subsys_initcall(da9062_regulator_init);
+
+static void __exit da9062_regulator_cleanup(void)
+{
+	platform_driver_unregister(&da9062_regulator_driver);
+}
+module_exit(da9062_regulator_cleanup);
+
+/* Module information */
+MODULE_AUTHOR("S Twiss <stwiss.opensource@...semi.com>");
+MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform: da9062-regulators");
-- 
end-of-patch for PATCH V1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists