[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAOiHx=n8a=HTR-cAQffRx2OaGxXzLDzmtwwy99xCFqty521CKw@mail.gmail.com>
Date: Sun, 19 Apr 2015 16:27:38 +0200
From: Jonas Gorski <jogo@...nwrt.org>
To: Alban Bedel <albeu@...e.fr>
Cc: MIPS Mailing List <linux-mips@...ux-mips.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Ralf Baechle <ralf@...ux-mips.org>,
Andrew Bresticker <abrestic@...omium.org>,
Qais Yousef <qais.yousef@...tec.com>,
Gabor Juhos <juhosg@...nwrt.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 09/12] devicetree: Add bindings for the ATH79 GPIO controllers
On Sun, Apr 19, 2015 at 3:42 PM, Alban Bedel <albeu@...e.fr> wrote:
> These bindings support the GPIO controllers found on the Qualcomm
> Atheros AR7xxx/AR9XXX SoC.
>
> Signed-off-by: Alban Bedel <albeu@...e.fr>
> ---
> v2: * Add the ngpios property to have fewer fallbacks and simpler code
> ---
> .../devicetree/bindings/gpio/gpio-ath79.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
> new file mode 100644
> index 0000000..e027864
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
> @@ -0,0 +1,38 @@
> +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
> +
> +Required properties:
> +- compatible: has to be "qca,<soctype>-gpio" and one of the following
> + fallback:
maybe plural?
> + - "qca,ar7100-gpio"
> + - "qca,ar9340-gpio"
> +- reg: Base address and size of the controllers memory area
> +- gpio-controller : Marks the device node as a GPIO controller.
> +- #gpio-cells : Should be two. The first cell is the pin number and the
> + second cell is used to specify optional parameters.
> +- ngpios: Should be set to the number of GPIOs available on the SoC.
> +
> +Optional properties:
> +- interrupt-parent: phandle of the parent interrupt controller.
> +- interrupts: Interrupt specifier for the controllers interrupt.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode interrupt
> + source, should be 2
> +
> +Please refer to interrupts.txt in this directory for details of the common
> +Interrupt Controllers bindings used by client devices.
> +
> +Example:
> +
> + gpio@...40000 {
> + compatible = "qca,ar9132-gpio", "qca,ar9130-gpio";
You have neither "qca,ar7100-gpio" nor "qca,ar9340-gpio", so by your
own documentation this would be invalid.
Jonas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists