Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.0.0-next-20150415-00001-g47d4e2d-dirty (rdostal@rdostal-desktop) (gcc version 4.7.2 (GCC) ) #40 SMP Sun Apr 19 20:43:46 CEST 2015 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: TI AM335x BeagleBone Black earlycon: no match for ttyO0,115200n8 cma: Reserved 16 MiB at 0x9e000000 Memory policy: Data cache writeback On node 0 totalpages: 130816 free_area_init_node: node 0, pgdat c09bbe40, node_mem_map dfa71000 Normal zone: 1152 pages used for memmap Normal zone: 0 pages reserved Normal zone: 130816 pages, LIFO batch:31 CPU: All CPU(s) started in SVC mode. AM335X ES2.1 (sgx neon ) PERCPU: Embedded 13 pages/cpu @dfa19000 s23040 r8192 d22016 u53248 pcpu-alloc: s23040 r8192 d22016 u53248 alloc=13*4096 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129664 Kernel command line: console=ttyO0,115200n8 video=HDMI-A-1:1280x720@60 consoleblank=0 debug drm.debug=0xf root=/dev/nfs nfsroot=10.1.14.92:/srv/nfs/bone,nolock rw ip=dhcp PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 483232K/523264K available (6467K kernel code, 745K rwdata, 2304K rodata, 444K init, 8221K bss, 23648K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0898f9c (8772 kB) .init : 0xc0899000 - 0xc0908000 ( 444 kB) .data : 0xc0908000 - 0xc09c2650 ( 746 kB) .bss : 0xc09c5000 - 0xc11cc710 (8222 kB) Running RCU self tests Hierarchical RCU implementation. RCU lockdep checking is enabled. Additional per-CPU info printed with stalls. RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts OMAP clockevent source: timer2 at 24000000 Hz sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns OMAP clocksource: timer1 at 24000000 Hz Console: colour dummy device 80x30 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 32768 ... MAX_LOCKDEP_CHAINS: 65536 ... CHAINHASH_SIZE: 32768 memory used by lock dependency info: 5167 kB per task-struct memory footprint: 1152 bytes Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys blkio Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys perf_event CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0x80008280 - 0x800082f0 Brought up 1 CPUs SMP: Total of 1 processors activated (996.14 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 omap_hwmod: tptc0 using broken dt data from edma omap_hwmod: tptc1 using broken dt data from edma omap_hwmod: tptc2 using broken dt data from edma omap_hwmod: debugss: _wait_target_disable failed clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu gpiochip_add: registered GPIOs 0 to 31 on device: gpio OMAP GPIO hardware version 0.1 gpiochip_add: registered GPIOs 32 to 63 on device: gpio gpiochip_add: registered GPIOs 64 to 95 on device: gpio gpiochip_add: registered GPIOs 96 to 127 on device: gpio No ATAGs? hw-breakpoint: debug architecture 0x4 unsupported. edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]' SCSI subsystem initialized libata version 3.00 loaded. omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe Switched to clocksource timer1 NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 5, 147456 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 2, 20480 bytes) UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. CPU PMU: Failed to parse /interrupt-affinity[0] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available futex hash table entries: 256 (order: 2, 16384 bytes) audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.480:1): initialized VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled omap_uart 44e09000.serial: no wakeirq for uart0 of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]' 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0 console [ttyO0] enabled [drm] Initialized drm 1.1.0 20060810 [drm:tilcdc_drm_init] init slave hdmi: could not get i2c [drm:tda998x_init] brd: module loaded loop: module loaded mtdoops: mtd device (mtddev=name/number) must be supplied mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Driver 'mmcblk' needs updating - please use bus_type methods omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd omap_hsmmc 48060000.mmc: using device tree for GPIO lookup of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0) omap_hsmmc 48060000.mmc: Got CD GPIO omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp omap_hsmmc 48060000.mmc: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]' of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]' omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup omap_hsmmc 48060000.mmc: lookup for GPIO wp failed omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]' of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]' omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed mmc0: host does not support reading read-only switch, assuming write-enable ledtrig-cpu: registered to indicate activity on CPUs oprofile: using arm/armv7 Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize ThumbEE CPU extension supported. Registering SWP/SWPB emulation handler SmartReflex Class3 initialized mmc0: new high speed SDHC card at address 1234 mmcblk0: mmc0:1234 SA04G 3.63 GiB mmcblk0: p1 p2 tps65217 0-0024: TPS65217 ID 0xe version 1.2 omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [drm:drm_platform_init] [drm:drm_get_platform_dev] mmc1: MAN_BKOPS_EN bit is not set [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 64 [drm:drm_minor_register] [drm:drm_minor_register] [drm:drm_minor_register] new minor registered 0 [drm:tilcdc_load] Maximum Bandwidth Value 78643200 [drm:tilcdc_load] Maximum Horizontal Pixel Width Value 2048pixels [drm:tilcdc_load] Maximum Pixel Clock Value 126000KHz [drm:modeset_init] loading module: slave mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC04G 3.60 GiB mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB mmcblk1: p1 p2 tda998x 0-0070: found TDA19988 [drm:drm_connector_get_cmdline_mode] cmdline mode for connector HDMI-A-1 1280x720@60Hz [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs [drm:drm_sysfs_hotplug_event] generating hotplug event [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. [drm:drm_irq_install] irq=171 [drm:tilcdc_load] slave: preferred_bpp: 16 [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] status updated from 3 to 1 [drm:tilcdc_crtc_mode_valid] Processing mode 1440x900@60 with pixel clock 106500 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@50 with pixel clock 74250 [drm:tilcdc_crtc_mode_valid] Processing mode 720x576@50 with pixel clock 27000 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74250 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x1024@60 with pixel clock 108000 [drm:tilcdc_crtc_mode_valid] Processing mode 800x600@60 with pixel clock 40000 [drm:tilcdc_crtc_mode_valid] Processing mode 640x480@60 with pixel clock 25200 [drm:tilcdc_crtc_mode_valid] Processing mode 1024x768@60 with pixel clock 65000 [drm:tilcdc_crtc_mode_valid] Processing mode 640x480@60 with pixel clock 25175 [drm:tilcdc_crtc_mode_valid] Processing mode 720x480@60 with pixel clock 27000 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74176 [drm:tilcdc_crtc_mode_valid] Processing mode 720x480@60 with pixel clock 27027 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74440 [drm:drm_mode_debug_printmodeline] Modeline 23:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 24:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 32:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x480i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 33:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x576i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 41:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 44:"720x480i" 60 13513 720 739 801 858 480 488 494 525 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x480i mode: NO_INTERLACE [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes : [drm:drm_mode_debug_printmodeline] Modeline 22:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6 [drm:drm_mode_debug_printmodeline] Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x20 0x6 [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 42:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 25:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 26:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 46:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 35:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_setup_crtcs] [drm:drm_enable_connectors] connector 20 enabled? yes [drm:drm_target_preferred] looking for cmdline mode on connector 20 [drm:drm_target_preferred] found mode 1280x720 [drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config [drm:drm_setup_crtcs] desired mode 1280x720 set on crtc 18 (0,0) [drm:drm_fbdev_cma_create] surface width(1280), height(720) and bpp(16) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] crtc has no fb, full mode set [drm:drm_crtc_helper_set_config] modes are different, full mode set [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline] Modeline 23:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x20 0x6 [drm:drm_crtc_helper_set_config] encoder changed, full mode switch [drm:drm_crtc_helper_set_config] crtc changed, full mode switch [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_crtc_helper_set_config] attempting to set mode from userspace [drm:drm_mode_debug_printmodeline] Modeline 23:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x20 0x6 [drm:drm_crtc_helper_set_mode] [CRTC:18] [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74440 [drm:tilcdc_crtc_mode_set] 1280x720, hbp=192, hfp=56, hsw=136, vbp=22, vfp=1, vsw=3 [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (1) [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (2) [drm:tilcdc_crtc_update_clk] lcd_clk=148878048, mode clock=74440, div=1 [drm:tilcdc_crtc_update_clk] fck=148878048, dpll_disp_ck=148878048 [drm:drm_crtc_helper_set_mode] [ENCODER:19:TMDS-19] set [MODE:23:1280x720] [drm:drm_calc_timestamping_constants] crtc 18: hwmode: htotal 1664, vtotal 746, vdisplay 720 [drm:drm_calc_timestamping_constants] crtc 18: clock 74440 kHz framedur 16675765 linedur 22353, pixeldur 13 [drm:drm_crtc_helper_set_config] Setting connector DPMS state to on [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] set DPMS on [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (3) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) Console: switching to colour frame buffer device 160x45 [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) tilcdc 4830e000.lcdc: fb0: frame buffer device tilcdc 4830e000.lcdc: registered panic notifier [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 davinci_mdio 4a101000.mdio: detected phy mask fffffffe libphy: 4a101000.mdio: probed davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 cpsw 4a100000.ethernet: Detected MACID = 78:a5:04:c8:db:ba hctosys: unable to open rtc device (rtc0) sr_init: No PMIC hook to init smartreflex sr_init: platform driver register failed for SR net eth0: initializing cpsw version 1.12 (0) net eth0: phy found : id is : 0x7c0f1 libphy: PHY 4a101000.mdio:01 not found net eth0: phy 4a101000.mdio:01 not found on slave 1 cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.1.14.1, my address is 10.1.14.102 IP-Config: Complete: device=eth0, hwaddr=78:a5:04:c8:db:ba, ipaddr=10.1.14.102, mask=255.255.255.0, gw=10.1.14.1 host=10.1.14.102, domain=, nis-domain=(none) bootserver=0.0.0.0, rootserver=10.1.14.92, rootpath=, mtu=1492 nameserver0=10.1.14.1 VFS: Mounted root (nfs filesystem) on device 0:16. devtmpfs: mounted Freeing unused kernel memory: 444K (c0899000 - c0908000) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) udevd[76]: starting version 182 of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@2[0]' - status (0) of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@3[0]' - status (0) of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@4[0]' - status (0) of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@5[0]' - status (0) random: nonblocking pool is initialized omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec omap_rtc 44e3e000.rtc: already running omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup am335x-phy-driver 47401300.usb-phy: lookup for GPIO reset failed am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]' am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup am335x-phy-driver 47401300.usb-phy: lookup for GPIO vbus-detect failed 47401300.usb-phy supply vcc not found, using dummy regulator am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup am335x-phy-driver 47401b00.usb-phy: lookup for GPIO reset failed am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]' am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup am335x-phy-driver 47401b00.usb-phy: lookup for GPIO vbus-detect failed 47401b00.usb-phy supply vcc not found, using dummy regulator omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [drm:drm_sysfs_hotplug_event] generating hotplug event [drm:drm_fb_helper_hotplug_event] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74440 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74250 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@60 with pixel clock 74176 [drm:tilcdc_crtc_mode_valid] Processing mode 1280x720@50 with pixel clock 74250 [drm:tilcdc_crtc_mode_valid] Processing mode 800x600@60 with pixel clock 40000 [drm:tilcdc_crtc_mode_valid] Processing mode 720x576@50 with pixel clock 27000 [drm:tilcdc_crtc_mode_valid] Processing mode 720x480@60 with pixel clock 27027 [drm:tilcdc_crtc_mode_valid] Processing mode 720x480@60 with pixel clock 27000 [drm:tilcdc_crtc_mode_valid] Processing mode 640x480@60 with pixel clock 25200 [drm:tilcdc_crtc_mode_valid] Processing mode 640x480@60 with pixel clock 25175 [drm:drm_mode_debug_printmodeline] Modeline 22:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6 [drm:drm_mode_prune_invalid] Not using 1440x900 mode: VIRTUAL_X [drm:drm_mode_debug_printmodeline] Modeline 28:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:drm_mode_prune_invalid] Not using 1280x1024 mode: VIRTUAL_Y [drm:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:drm_mode_prune_invalid] Not using 1024x768 mode: VIRTUAL_Y [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: VIRTUAL_X [drm:drm_mode_debug_printmodeline] Modeline 36:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: VIRTUAL_X [drm:drm_mode_debug_printmodeline] Modeline 45:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x480i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 47:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x576i mode: NO_INTERLACE [drm:drm_mode_debug_printmodeline] Modeline 56:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [drm:drm_mode_prune_invalid] Not using 1920x1080i mode: VIRTUAL_X [drm:drm_mode_debug_printmodeline] Modeline 59:"720x480i" 60 13513 720 739 801 858 480 488 494 525 0x40 0x101a [drm:drm_mode_prune_invalid] Not using 720x480i mode: NO_INTERLACE [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:20:HDMI-A-1] probed modes : [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x20 0x6 [drm:drm_mode_debug_printmodeline] Modeline 27:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 42:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 25:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:drm_mode_debug_printmodeline] Modeline 26:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 46:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 35:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_mode_debug_printmodeline] Modeline 34:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [drm:drm_setup_crtcs] [drm:drm_enable_connectors] connector 20 enabled? yes [drm:drm_target_preferred] looking for cmdline mode on connector 20 [drm:drm_target_preferred] found mode 1280x720 [drm:drm_setup_crtcs] picking CRTCs for 2048x2048 config [drm:drm_setup_crtcs] desired mode 1280x720 set on crtc 18 (0,0) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) FAT-fs (mmcblk0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: MUSB HDRC host driver usb usb1: Manufacturer: Linux 4.0.0-next-20150415-00001-g47d4e2d-dirty musb-hcd usb usb1: SerialNumber: musb-hdrc.1.auto FAT-fs (mmcblk0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected FAT-fs (mmcblk1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-1: new low-speed USB device number 2 using musb-hdrc usb 1-1: New USB device found, idVendor=046a, idProduct=0011 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver usbkbd input: HID 046a:0011 as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.0/0003:046A:0011.0001/input/input0 hid-generic 0003:046A:0011.0001: input: USB HID v1.11 Keyboard [HID 046a:0011] on usb-musb-hdrc.1.auto-1/input0 EXT4-fs (mmcblk1p2): Unrecognized mount option "iocharset=utf8" or missing value EXT4-fs (mmcblk0p2): Unrecognized mount option "iocharset=utf8" or missing value FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk1boot1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! EXT3-fs (mmcblk1p2): error: unrecognized mount option "iocharset=utf8" or missing value EXT3-fs (mmcblk0p2): error: unrecognized mount option "iocharset=utf8" or missing value FAT-fs (mmcblk1p2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk1boot0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk0p2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk0p1): IO charset utf8 not found FAT-fs (mmcblk1p1): IO charset utf8 not found FAT-fs (mmcblk1boot1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! EXT3-fs (mmcblk1p2): error: unrecognized mount option "iocharset=utf8" or missing value EXT3-fs (mmcblk0p2): error: unrecognized mount option "iocharset=utf8" or missing value FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! EXT4-fs (mmcblk1p2): Unrecognized mount option "iocharset=utf8" or missing value FAT-fs (mmcblk1boot0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! EXT4-fs (mmcblk0p2): Unrecognized mount option "iocharset=utf8" or missing value FAT-fs (mmcblk1p2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk0p2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT-fs (mmcblk1p1): IO charset utf8 not found FAT-fs (mmcblk0p1): IO charset utf8 not found EXT4-fs (mmcblk1p2): recovery complete EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (mmcblk0p2): recovery complete EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. NET: Registered protocol family 10 Bluetooth: Core ver 2.20 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5) [drm:drm_crtc_helper_set_config] [drm:drm_crtc_helper_set_config] [CRTC:18] [FB:24] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config] [CONNECTOR:20:HDMI-A-1] to [CRTC:18] [drm:drm_framebuffer_reference] ddccddc0: FB ID: 24 (4) [drm:drm_framebuffer_unreference] ddccddc0: FB ID: 24 (5)