[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150422094016.GT3097@tbergstrom-lnx.Nvidia.com>
Date: Wed, 22 Apr 2015 12:40:16 +0300
From: Peter De Schrijver <pdeschrijver@...dia.com>
To: Rhyland Klein <rklein@...dia.com>
CC: Mike Turquette <mturquette@...aro.org>,
Stephen Warren <swarren@...dotorg.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
<linux-clk@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] clk: tegra: Fix comments for structure definitions
On Mon, Apr 13, 2015 at 12:38:17PM -0400, Rhyland Klein wrote:
> Some fields moved from the tegra_clk_pll struct to
> the tegra_pll_params struct. Update the struct comments
> to reflect where the fields really are.
>
Acked-By: Peter De Schrijver <pdeschrijver@...dia.com>
> Signed-off-by: Rhyland Klein <rklein@...dia.com>
> ---
> drivers/clk/tegra/clk.h | 74 +++++++++++++++++++++++------------------------
> 1 file changed, 37 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 751a97966354..4eae99a4f32e 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -171,6 +171,30 @@ struct div_nmp {
> * @lock_bit_idx: Bit index for PLL lock status
> * @lock_enable_bit_idx: Bit index to enable PLL lock
> * @lock_delay: Delay in us if PLL lock is not used
> + * @freq_table: array of frequencies supported by PLL
> + * @fixed_rate: PLL rate if it is fixed
> + * @flags: PLL flags
> + *
> + * Flags:
> + * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
> + * PLL locking. If not set it will use lock_delay value to wait.
> + * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
> + * to be programmed to change output frequency of the PLL.
> + * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
> + * to be programmed to change output frequency of the PLL.
> + * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
> + * to be programmed to change output frequency of the PLL.
> + * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
> + * that it is PLLU and invert post divider value.
> + * TEGRA_PLLM - PLLM has additional override settings in PMC. This
> + * flag indicates that it is PLLM and use override settings.
> + * TEGRA_PLL_FIXED - We are not supposed to change output frequency
> + * of some plls.
> + * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
> + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
> + * base register.
> + * TEGRA_PLL_BYPASS - PLL has bypass bit
> + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
> */
> struct tegra_clk_pll_params {
> unsigned long input_min;
> @@ -203,38 +227,26 @@ struct tegra_clk_pll_params {
> unsigned long fixed_rate;
> };
>
> +#define TEGRA_PLL_USE_LOCK BIT(0)
> +#define TEGRA_PLL_HAS_CPCON BIT(1)
> +#define TEGRA_PLL_SET_LFCON BIT(2)
> +#define TEGRA_PLL_SET_DCCON BIT(3)
> +#define TEGRA_PLLU BIT(4)
> +#define TEGRA_PLLM BIT(5)
> +#define TEGRA_PLL_FIXED BIT(6)
> +#define TEGRA_PLLE_CONFIGURE BIT(7)
> +#define TEGRA_PLL_LOCK_MISC BIT(8)
> +#define TEGRA_PLL_BYPASS BIT(9)
> +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
> +
> /**
> * struct tegra_clk_pll - Tegra PLL clock
> *
> * @hw: handle between common and hardware-specifix interfaces
> * @clk_base: address of CAR controller
> * @pmc: address of PMC, required to read override bits
> - * @freq_table: array of frequencies supported by PLL
> - * @params: PLL parameters
> - * @flags: PLL flags
> - * @fixed_rate: PLL rate if it is fixed
> * @lock: register lock
> - *
> - * Flags:
> - * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
> - * PLL locking. If not set it will use lock_delay value to wait.
> - * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
> - * to be programmed to change output frequency of the PLL.
> - * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
> - * to be programmed to change output frequency of the PLL.
> - * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
> - * to be programmed to change output frequency of the PLL.
> - * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
> - * that it is PLLU and invert post divider value.
> - * TEGRA_PLLM - PLLM has additional override settings in PMC. This
> - * flag indicates that it is PLLM and use override settings.
> - * TEGRA_PLL_FIXED - We are not supposed to change output frequency
> - * of some plls.
> - * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
> - * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
> - * base register.
> - * TEGRA_PLL_BYPASS - PLL has bypass bit
> - * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
> + * @params: PLL parameters
> */
> struct tegra_clk_pll {
> struct clk_hw hw;
> @@ -246,18 +258,6 @@ struct tegra_clk_pll {
>
> #define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
>
> -#define TEGRA_PLL_USE_LOCK BIT(0)
> -#define TEGRA_PLL_HAS_CPCON BIT(1)
> -#define TEGRA_PLL_SET_LFCON BIT(2)
> -#define TEGRA_PLL_SET_DCCON BIT(3)
> -#define TEGRA_PLLU BIT(4)
> -#define TEGRA_PLLM BIT(5)
> -#define TEGRA_PLL_FIXED BIT(6)
> -#define TEGRA_PLLE_CONFIGURE BIT(7)
> -#define TEGRA_PLL_LOCK_MISC BIT(8)
> -#define TEGRA_PLL_BYPASS BIT(9)
> -#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
> -
> extern const struct clk_ops tegra_clk_pll_ops;
> extern const struct clk_ops tegra_clk_plle_ops;
> struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists