| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150422135002.1b407b98@why.wild-wind.fr.eu.org>
Date: Wed, 22 Apr 2015 13:50:02 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Duc Dang <dhdang@....com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>, Arnd Bergmann <arnd@...db.de>,
"grant.likely@...aro.org" <grant.likely@...aro.org>,
Liviu Dudau <Liviu.Dudau@....com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Tanmay Inamdar <tinamdar@....com>, Loc Ho <lho@....com>,
Feng Kan <fkan@....com>
Subject: Re: [PATCH v6 2/4] PCI: X-Gene: Add the APM X-Gene v1 PCIe MSI/MSIX
termination driver
On Wed, 22 Apr 2015 07:15:09 +0100
Duc Dang <dhdang@....com> wrote:
> APM X-Gene v1 SoC supports its own implementation of MSI, which is not compliant
> to GIC V2M specification for MSI Termination.
>
> There is single MSI block in X-Gene v1 SOC which serves all 5 PCIe ports. This MSI
> block supports 2048 MSI termination ports coalesced into 16 physical HW IRQ lines
> and shared across all 5 PCIe ports.
>
> As there are only 16 HW IRQs to serve 2048 MSI vectors, to support set_affinity
> correctly for each MSI vectors, the 16 HW IRQs are statically allocated to 8 X-Gene
> v1 cores (2 HW IRQs for each cores). To steer MSI interrupt to target CPU, MSI vector
> is moved around these HW IRQs lines. With this approach, the total MSI vectors this
> driver supports is reduced to 256.
>
> Signed-off-by: Duc Dang <dhdang@....com>
> Signed-off-by: Tanmay Inamdar <tinamdar@....com>
> ---
> drivers/pci/host/Kconfig | 8 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-xgene-msi.c | 504 +++++++++++++++++++++++++++++++++++++++
> drivers/pci/host/pci-xgene.c | 21 ++
> 4 files changed, 534 insertions(+)
> create mode 100644 drivers/pci/host/pci-xgene-msi.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 7b892a9..9f1e2b5 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -89,11 +89,19 @@ config PCI_XGENE
> depends on ARCH_XGENE
> depends on OF
> select PCIEPORTBUS
> + select PCI_MSI_IRQ_DOMAIN if PCI_MSI
> + select PCI_XGENE_MSI if PCI_MSI
> help
> Say Y here if you want internal PCI support on APM X-Gene SoC.
> There are 5 internal PCIe ports available. Each port is GEN3 capable
> and have varied lanes from x1 to x8.
>
> +config PCI_XGENE_MSI
> + bool "X-Gene v1 PCIe MSI feature"
> + depends on PCI_XGENE && PCI_MSI
> + help
> + Say Y here if you want PCIE MSI support for APM X-Gene v1 SoC
> +
> config PCI_LAYERSCAPE
> bool "Freescale Layerscape PCIe controller"
> depends on OF && ARM
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index e61d91c..f39bde3 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -11,5 +11,6 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
> +obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
> obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
> diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c
> new file mode 100644
> index 0000000..8bbf925
> --- /dev/null
> +++ b/drivers/pci/host/pci-xgene-msi.c
> @@ -0,0 +1,504 @@
> +/*
> + * APM X-Gene MSI Driver
> + *
> + * Copyright (c) 2014, Applied Micro Circuits Corporation
> + * Author: Tanmay Inamdar <tinamdar@....com>
> + * Duc Dang <dhdang@....com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/cpu.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_pci.h>
> +
> +#define MSI_IR0 0x000000
> +#define MSI_INT0 0x800000
> +#define IDX_PER_GROUP 8
> +#define IRQS_PER_IDX 16
> +#define NR_HW_IRQS 16
> +#define NR_MSI_VEC (IDX_PER_GROUP * IRQS_PER_IDX * NR_HW_IRQS)
> +
> +struct xgene_msi {
> + struct device_node *node;
> + struct msi_controller mchip;
> + struct irq_domain *domain;
> + u64 msi_addr;
> + void __iomem *msi_regs;
> + unsigned long *bitmap;
> + struct mutex bitmap_lock;
> + int *msi_virqs;
> + int num_cpus;
> +};
> +
> +/* Global data */
> +static struct xgene_msi xgene_msi_ctrl;
> +
> +static struct irq_chip xgene_msi_top_irq_chip = {
> + .name = "X-Gene1 MSI",
> + .irq_enable = pci_msi_unmask_irq,
> + .irq_disable = pci_msi_mask_irq,
> + .irq_mask = pci_msi_mask_irq,
> + .irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +static struct msi_domain_info xgene_msi_domain_info = {
> + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> + MSI_FLAG_PCI_MSIX),
> + .chip = &xgene_msi_top_irq_chip,
> +};
> +
> +/*
> + * X-Gene v1 has 16 groups of MSI termination registers MSInIRx, where
> + * n is group number (0..F), x is index of registers in each group (0..7)
> + * The registers layout is like following:
> + * MSI0IR0 base_addr
> + * MSI0IR1 base_addr + 0x10000
> + * ... ...
> + * MSI0IR6 base_addr + 0x60000
> + * MSI0IR7 base_addr + 0x70000
> + * MSI1IR0 base_addr + 0x80000
> + * MSI1IR1 base_addr + 0x90000
> + * ... ...
> + * MSI1IR7 base_addr + 0xF0000
> + * MSI2IR0 base_addr + 0x100000
> + * ... ...
> + * MSIFIR0 base_addr + 0x780000
> + * MSIFIR1 base_addr + 0x790000
> + * ... ...
> + * MSIFIR7 base_addr + 0x7F0000
> + *
> + * Each index register support 16 MSI vectors (0..15) to generate interrupt.
> + * There are total 16 GIC IRQs assigned for these 16 groups of MSI termination
> + * registers.
> + *
> + * With 2048 MSI vectors supported, the MSI message can be construct using
> + * following scheme:
> + * - Divide into 8 256-vector groups
> + * Group 0: 0-255
> + * Group 1: 256-511
> + * Group 2: 512-767
> + * ...
> + * Group 7: 1792-2047
> + * - Each 256-vector group is divided into 16 16-vector groups
> + * As an example: 16 16-vector groups for 256-vector group 0-255 is
> + * Group 0: 0-15
> + * Group 1: 16-32
> + * ...
> + * Group 15: 240-255
> + * - The termination address of MSI vector in 256-vector group n and 16-vector
> + * group x is the address of MSIxIRn
> + * - The data for MSI vector in 16-vector group x is x
> + */
> +static void xgene_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> + struct xgene_msi *msi = irq_data_get_irq_chip_data(data);
> + u32 reg_set = data->hwirq / (NR_HW_IRQS * IRQS_PER_IDX);
> + u32 group = data->hwirq % NR_HW_IRQS;
> +
> + msg->address_hi = upper_32_bits(msi->msi_addr);
> + msg->address_lo = lower_32_bits(msi->msi_addr) +
> + (((8 * group) + reg_set) << 16);
> + msg->data = (data->hwirq / NR_HW_IRQS) % IRQS_PER_IDX;
> +}
> +
> +/*
> + * X-Gene v1 only has 16 MSI GIC IRQs for 2048 MSI vectors.
> + * To maintain the expected behaviour of .set_affinity for each MSI
> + * interrupt, the 16 MSI GIC IRQs are statically allocated to 8 X-Gene
> + * v1 cores (2 GIC IRQs for each core). The MSI vector is moved fom 1
> + * MSI GIC IRQ to another MSI GIC IRQ to steer its MSI interrupt to
> + * correct X-Gene v1 core. As a consequence, the total MSI vectors that
> + * X-Gene v1 supports will be reduced to 256 (2048/8) vectors.
> + */
> +static int xgene_msi_set_affinity(struct irq_data *irq_data,
> + const struct cpumask *mask, bool force)
> +{
> + struct xgene_msi *msi = irq_data_get_irq_chip_data(irq_data);
> + struct msi_desc *desc = irq_get_msi_desc(irq_data->irq);
> + int target_cpu = cpumask_first(mask);
> + int curr_cpu;
> +
> + if (!desc)
> + return -EINVAL;
I still don't understand under which circumstances this could ever be
NULL. You got here because someone has created this interrupt, and
inserted it in the domain. Someone also found a way to reference it,
and call this code. It must have been initialized the first place.
Also, nothing uses this variable in what follows, so please drop it
unless you can prove that desc can be NULL is that it is unsafe to
proceed further.
> +
> + curr_cpu = (irq_data->hwirq % NR_HW_IRQS) % msi->num_cpus;
> + if (curr_cpu == target_cpu)
> + return IRQ_SET_MASK_OK_DONE;
> +
> + /* Update MSI number to target the new CPU */
> + irq_data->hwirq = irq_data->hwirq + (target_cpu - curr_cpu);
> +
> + return IRQ_SET_MASK_OK;
> +}
> +
> +static struct irq_chip xgene_msi_bottom_irq_chip = {
> + .name = "MSI",
> + .irq_set_affinity = xgene_msi_set_affinity,
> + .irq_compose_msi_msg = xgene_compose_msi_msg,
> +};
> +
> +static int xgene_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *args)
> +{
> + struct xgene_msi *msi = domain->host_data;
> + int msi_irq;
> +
> + mutex_lock(&msi->bitmap_lock);
> +
> + msi_irq = bitmap_find_next_zero_area(msi->bitmap, NR_MSI_VEC, 0,
> + msi->num_cpus, 0);
> + if (msi_irq < NR_MSI_VEC)
> + bitmap_set(msi->bitmap, msi_irq, msi->num_cpus);
> + else
> + msi_irq = -ENOSPC;
> +
> + mutex_unlock(&msi->bitmap_lock);
> +
> + if (msi_irq < 0)
> + return msi_irq;
> +
> + irq_domain_set_info(domain, virq, msi_irq,
> + &xgene_msi_bottom_irq_chip, domain->host_data,
> + handle_simple_irq, NULL, NULL);
> + set_irq_flags(virq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static void xgene_irq_domain_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> + struct xgene_msi *msi = irq_data_get_irq_chip_data(d);
> + u32 hwirq;
> +
> + mutex_lock(&msi->bitmap_lock);
> +
> + hwirq = d->hwirq - (d->hwirq % msi->num_cpus);
> + bitmap_clear(msi->bitmap, hwirq, msi->num_cpus);
> +
> + mutex_unlock(&msi->bitmap_lock);
> +
> + irq_domain_free_irqs_parent(domain, virq, nr_irqs);
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> + .alloc = xgene_irq_domain_alloc,
> + .free = xgene_irq_domain_free,
> +};
> +
> +static int xgene_allocate_domains(struct xgene_msi *msi)
> +{
> + msi->domain = irq_domain_add_linear(NULL, NR_MSI_VEC,
> + &msi_domain_ops, msi);
> + if (!msi->domain)
> + return -ENOMEM;
> +
> + msi->mchip.of_node = msi->node;
> + msi->mchip.domain = pci_msi_create_irq_domain(msi->mchip.of_node,
> + &xgene_msi_domain_info,
> + msi->domain);
> +
> + if (!msi->mchip.domain) {
> + irq_domain_remove(msi->domain);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +static void xgene_free_domains(struct xgene_msi *msi)
> +{
> + if (msi->mchip.domain)
> + irq_domain_remove(msi->mchip.domain);
> + if (msi->domain)
> + irq_domain_remove(msi->domain);
> +}
> +
> +static int xgene_msi_init_allocator(struct xgene_msi *xgene_msi)
> +{
> + int size = BITS_TO_LONGS(NR_MSI_VEC) * sizeof(long);
> +
> + xgene_msi->bitmap = kzalloc(size, GFP_KERNEL);
> + if (!xgene_msi->bitmap)
> + return -ENOMEM;
> +
> + mutex_init(&xgene_msi->bitmap_lock);
> +
> + xgene_msi->msi_virqs = kcalloc(NR_HW_IRQS, sizeof(int), GFP_KERNEL);
> + if (!xgene_msi->msi_virqs)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> +static void xgene_msi_isr(unsigned int irq, struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct xgene_msi *xgene_msi;
> + unsigned int virq;
> + int msir_index, msir_reg, msir_val, hw_irq;
> + u32 intr_index, grp_select, msi_grp;
> + int i;
> +
> + chained_irq_enter(chip, desc);
> +
> + xgene_msi = irq_desc_get_handler_data(desc);
> +
> + msi_grp = NR_HW_IRQS;
> + for (i = 0; i < NR_HW_IRQS; i++)
> + if (irq == xgene_msi->msi_virqs[i]) {
> + msi_grp = i;
> + break;
> + }
Oh, please!!! In v3, you were giving silly reasons to shave one cycle
off a slow path, but you now seem pretty happy to run this loop on the
bloody hot path!
I already suggested that you actually save the group in handler_data,
and reference the global xgene_msi, since it is guaranteed to be
unique. If you really want to pointlessly follow pointers, you could
replace your msi_virqs array with an array of:
struct xgene_msi_group {
struct xgene_msi *xgene_msi;
int gic_irq;
u32 msi_grp;
};
and make the relevant structure pointer to by desc->handler_data. That
will give you the information you need once and for all, without any
silly, cycle wasting loop.
> + if (msi_grp >= NR_HW_IRQS) {
> + chained_irq_exit(chip, desc);
> + return;
> + }
And I really can't see how this can ever be valid.
> +
> + /*
> + * MSIINTn (n is 0..F) indicates if there is a pending MSI interrupt
> + * If bit x of this register is set (x is 0..7), one or more interupts
> + * corresponding to MSInIRx is set.
> + */
> + grp_select = readl_relaxed(xgene_msi->msi_regs +
> + MSI_INT0 + (msi_grp << 16));
> + while (grp_select) {
> + msir_index = ffs(grp_select) - 1;
> + /*
> + * Calculate MSInIRx address to read to check for interrupts
> + * (refer to termination address and data assignment
> + * described in xgene_compose_msi_msg function)
> + */
> + msir_reg = (msi_grp << 19) + (msir_index << 16);
> + msir_val = readl_relaxed(xgene_msi->msi_regs +
> + MSI_IR0 + msir_reg);
> + while (msir_val) {
> + intr_index = ffs(msir_val) - 1;
> + /*
> + * Calculate MSI vector number (refer to the termination
> + * address and data assignment described in
> + * xgene_compose_msi_msg function)
> + */
> + hw_irq = (((msir_index * IRQS_PER_IDX) + intr_index) *
> + NR_HW_IRQS) + msi_grp;
> + /*
> + * As we have multiple hw_irq that maps to single MSI,
> + * always look up the virq using the hw_irq as seen from
> + * CPU0
> + */
> + hw_irq = hw_irq - (hw_irq % xgene_msi->num_cpus);
> + virq = irq_find_mapping(xgene_msi->domain, hw_irq);
> + if (virq != 0)
> + generic_handle_irq(virq);
The (virq == 0) case certainly deserves a warning, because it indicates
something went horribly wrong somewhere.
> + msir_val &= ~(1 << intr_index);
> + }
> + grp_select &= ~(1 << msir_index);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static int xgene_msi_remove(struct platform_device *pdev)
> +{
> + int virq, i;
> + struct xgene_msi *msi = platform_get_drvdata(pdev);
> +
> + for (i = 0; i < NR_HW_IRQS; i++) {
> + virq = msi->msi_virqs[i];
> + if (virq != 0)
> + free_irq(virq, msi);
> + }
> + kfree(msi->msi_virqs);
> +
> + kfree(msi->bitmap);
> + msi->bitmap = NULL;
> +
> + xgene_free_domains(msi);
> +
> + return 0;
> +}
> +
> +static void xgene_msi_hwirq_alloc(unsigned int cpu)
> +{
> + struct xgene_msi *msi = &xgene_msi_ctrl;
> + cpumask_var_t mask;
> + int i;
> + int err;
> +
> + for (i = 0; i < NR_HW_IRQS; i++) {
> + if (i % msi->num_cpus != cpu)
> + continue;
> + if (!msi->msi_virqs[i])
> + continue;
> +
> + irq_set_chained_handler(msi->msi_virqs[i], xgene_msi_isr);
> + err = irq_set_handler_data(msi->msi_virqs[i], msi);
See? msi is *always* set to &xgene_msi_ctrl. So just encode the group
or use a structure similar to the one I've outlined above.
> + if (err)
> + continue;
So we got a critical error that just makes the driver unusable, and yet
we silently continue? Sounds like a plan...
> +
> + /*
> + * Statically allocate MSI GIC IRQs to each CPU core
> + * With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated
> + * to each core.
> + */
> + if (alloc_cpumask_var(&mask, GFP_KERNEL)) {
> + cpumask_clear(mask);
> + cpumask_set_cpu(cpu, mask);
> + err = irq_set_affinity(msi->msi_virqs[i], mask);
> + if (err) {
> + free_irq(msi->msi_virqs[i], msi);
> + free_cpumask_var(mask);
> + continue;
Same here...
> + }
> + free_cpumask_var(mask);
> + }
> + }
> +}
> +
> +static void xgene_msi_hwirq_free(unsigned int cpu)
> +{
> + /*
> + * Kernel takes care of moving MSI interrupts that
> + * are steered to this CPU to another online CPU
> + * and freeing the interrupt handlers of GIC IRQs
> + * allocated for this CPU, so simply return here.
> + */
Two things:
- I couldn't find the code that backs this statement. MSIs (actually
all interrupts) will indeed be moved, but I can't see how the kernel
is going to free GIC interrupt. Care to point me to it?
- Assuming this statement is true, why do we need this function at all?
> + return;
> +}
> +
> +static int xgene_msi_cpu_callback(struct notifier_block *nfb,
> + unsigned long action, void *hcpu)
> +{
> + unsigned cpu = (unsigned long)hcpu;
> +
> + switch (action) {
> + case CPU_ONLINE:
> + case CPU_ONLINE_FROZEN:
> + xgene_msi_hwirq_alloc(cpu);
> + break;
> + case CPU_DEAD:
> + case CPU_DEAD_FROZEN:
> + xgene_msi_hwirq_free(cpu);
> + break;
> + default:
> + break;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static struct notifier_block xgene_msi_cpu_notifier = {
> + .notifier_call = xgene_msi_cpu_callback,
> +};
> +
> +static const struct of_device_id xgene_msi_match_table[] = {
> + {.compatible = "apm,xgene1-msi"},
> + {},
> +};
> +
> +static int xgene_msi_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + int rc, irq_index;
> + struct xgene_msi *xgene_msi;
> + unsigned int cpu;
> + int virt_msir;
> +
> + xgene_msi = &xgene_msi_ctrl;
> + xgene_msi->node = pdev->dev.of_node;
The only purpose the xgene_msi->node seems to be an intermediate
storage for set mchip.of_node. Why don't you set the latter directly,
and drop the former?
> +
> + platform_set_drvdata(pdev, xgene_msi);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + xgene_msi->msi_regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(xgene_msi->msi_regs)) {
> + dev_err(&pdev->dev, "no reg space\n");
> + rc = -EINVAL;
> + goto error;
> + }
> + xgene_msi->msi_addr = res->start;
> +
> + xgene_msi->num_cpus = num_possible_cpus();
> +
> + rc = xgene_msi_init_allocator(xgene_msi);
> + if (rc) {
> + dev_err(&pdev->dev, "Error allocating MSI bitmap\n");
> + goto error;
> + }
> +
> + rc = xgene_allocate_domains(xgene_msi);
> + if (rc) {
> + dev_err(&pdev->dev, "Failed to allocate MSI domain\n");
> + goto error;
> + }
> +
> + for (irq_index = 0; irq_index < NR_HW_IRQS; irq_index++) {
> + virt_msir = platform_get_irq(pdev, irq_index);
> + if (virt_msir < 0) {
> + dev_err(&pdev->dev, "Cannot translate IRQ index %d\n",
> + irq_index);
> + rc = -EINVAL;
> + goto error;
> + }
> + xgene_msi->msi_virqs[irq_index] = virt_msir;
> + }
> +
> + cpu_notifier_register_begin();
> +
> + for_each_online_cpu(cpu)
> + xgene_msi_hwirq_alloc(cpu);
Why does this need to be in the cpu_notifier critical section? What
will you do when xgene_msi_hwirq_alloc() fails?
> + rc = __register_hotcpu_notifier(&xgene_msi_cpu_notifier);
> + if (rc) {
> + dev_err(&pdev->dev, "failed to add CPU MSI notifier\n");
> + cpu_notifier_register_done();
> + goto error;
> + }
> +
> + cpu_notifier_register_done();
> +
> + rc = of_pci_msi_chip_add(&xgene_msi->mchip);
> + if (rc) {
Assuming we fail here...
> + dev_err(&pdev->dev, "failed to add MSI controller chip\n");
> + goto error;
> + }
> +
> + dev_info(&pdev->dev, "APM X-Gene PCIe MSI driver loaded\n");
> +
> + return 0;
> +error:
> + xgene_msi_remove(pdev);
... we end-up here. But xgene_msi_remove doesn't unregister the
notifier...
> + return rc;
> +}
> +
> +static struct platform_driver xgene_msi_driver = {
> + .driver = {
> + .name = "xgene-msi",
> + .owner = THIS_MODULE,
> + .of_match_table = xgene_msi_match_table,
> + },
> + .probe = xgene_msi_probe,
> + .remove = xgene_msi_remove,
> +};
> +
> +static int __init xgene_pcie_msi_init(void)
> +{
> + return platform_driver_register(&xgene_msi_driver);
> +}
> +subsys_initcall(xgene_pcie_msi_init);
> +
> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
> index 22751ed..3e6faa1 100644
> --- a/drivers/pci/host/pci-xgene.c
> +++ b/drivers/pci/host/pci-xgene.c
> @@ -468,6 +468,23 @@ static int xgene_pcie_setup(struct xgene_pcie_port *port,
> return 0;
> }
>
> +static int xgene_pcie_msi_enable(struct pci_bus *bus)
> +{
> + struct device_node *msi_node;
> +
> + msi_node = of_parse_phandle(bus->dev.of_node,
> + "msi-parent", 0);
> + if (!msi_node)
> + return -ENODEV;
> +
> + bus->msi = of_pci_find_msi_chip_by_node(msi_node);
> + if (bus->msi)
> + bus->msi->dev = &bus->dev;
> + else
> + return -ENODEV;
> + return 0;
> +}
> +
> static int xgene_pcie_probe_bridge(struct platform_device *pdev)
> {
> struct device_node *dn = pdev->dev.of_node;
> @@ -504,6 +521,10 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
> if (!bus)
> return -ENOMEM;
>
> + if (IS_ENABLED(CONFIG_PCI_MSI))
> + if (xgene_pcie_msi_enable(bus))
> + dev_info(port->dev, "failed to enable MSI\n");
> +
> pci_scan_child_bus(bus);
> pci_assign_unassigned_bus_resources(bus);
> pci_bus_add_devices(bus);
> --
> 1.9.1
>
In somehow related news, this is my last review on this code for
quite some time. You've posted it 4 times in less than two weeks, right
in the middle of the merge window, I've given it a lot of attention,
and you've just run out of credits on the reviewing arcade game.
I suggest you spend some quality time with it, polish it as much as you
can. and post it again in about three weeks. Don't just make it work.
Make it beautiful. Make it something I become madly in love with. By
that time, I'll have forgotten about it and maybe I'll be swept off my
feet when I come back from holiday.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists