| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1429823583-3226-1-git-send-email-liang.z.li@intel.com>
Date: Fri, 24 Apr 2015 05:13:03 +0800
From: Liang Li <liang.z.li@...el.com>
To: kvm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: gleb@...nel.org, pbonzini@...hat.com, mtosatt@...hat.com,
tglx@...utronix.de, mingo@...hat.com, hpa@...or.com,
x86@...nel.org, joro@...tes.org, yang.z.zhang@...el.com,
Liang Li <liang.z.li@...el.com>,
Xudong Hao <xudong.hao@...el.com>
Subject: [v6] kvm/fpu: Enable fully eager restore kvm FPU
Romove lazy FPU logic and use eager FPU entirely. Eager FPU does
not have performance regression, and it can simplify the code.
When compiling kernel on westmere, the performance of eager FPU
is about 0.4% faster than lazy FPU.
Signed-off-by: Liang Li <liang.z.li@...el.com>
Signed-off-by: Xudong Hao <xudong.hao@...el.com>
---
arch/x86/include/asm/kvm_host.h | 1 -
arch/x86/kvm/svm.c | 22 ++----------
arch/x86/kvm/vmx.c | 74 +++--------------------------------------
arch/x86/kvm/x86.c | 8 +----
include/linux/kvm_host.h | 2 --
5 files changed, 9 insertions(+), 98 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index dea2e7e..5d84cc9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -743,7 +743,6 @@ struct kvm_x86_ops {
void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
- void (*fpu_deactivate)(struct kvm_vcpu *vcpu);
void (*tlb_flush)(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index ce741b8..1b3b29b 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1087,7 +1087,6 @@ static void init_vmcb(struct vcpu_svm *svm)
struct vmcb_control_area *control = &svm->vmcb->control;
struct vmcb_save_area *save = &svm->vmcb->save;
- svm->vcpu.fpu_active = 1;
svm->vcpu.arch.hflags = 0;
set_cr_intercept(svm, INTERCEPT_CR0_READ);
@@ -1529,15 +1528,12 @@ static void update_cr0_intercept(struct vcpu_svm *svm)
ulong gcr0 = svm->vcpu.arch.cr0;
u64 *hcr0 = &svm->vmcb->save.cr0;
- if (!svm->vcpu.fpu_active)
- *hcr0 |= SVM_CR0_SELECTIVE_MASK;
- else
- *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK)
- | (gcr0 & SVM_CR0_SELECTIVE_MASK);
+ *hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK)
+ | (gcr0 & SVM_CR0_SELECTIVE_MASK);
mark_dirty(svm->vmcb, VMCB_CR);
- if (gcr0 == *hcr0 && svm->vcpu.fpu_active) {
+ if (gcr0 == *hcr0) {
clr_cr_intercept(svm, INTERCEPT_CR0_READ);
clr_cr_intercept(svm, INTERCEPT_CR0_WRITE);
} else {
@@ -1568,8 +1564,6 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
if (!npt_enabled)
cr0 |= X86_CR0_PG | X86_CR0_WP;
- if (!vcpu->fpu_active)
- cr0 |= X86_CR0_TS;
/*
* re-enable caching here because the QEMU bios
* does not do it - this results in some delay at
@@ -1795,7 +1789,6 @@ static void svm_fpu_activate(struct kvm_vcpu *vcpu)
clr_exception_intercept(svm, NM_VECTOR);
- svm->vcpu.fpu_active = 1;
update_cr0_intercept(svm);
}
@@ -4139,14 +4132,6 @@ static bool svm_has_wbinvd_exit(void)
return true;
}
-static void svm_fpu_deactivate(struct kvm_vcpu *vcpu)
-{
- struct vcpu_svm *svm = to_svm(vcpu);
-
- set_exception_intercept(svm, NM_VECTOR);
- update_cr0_intercept(svm);
-}
-
#define PRE_EX(exit) { .exit_code = (exit), \
.stage = X86_ICPT_PRE_EXCEPT, }
#define POST_EX(exit) { .exit_code = (exit), \
@@ -4381,7 +4366,6 @@ static struct kvm_x86_ops svm_x86_ops = {
.cache_reg = svm_cache_reg,
.get_rflags = svm_get_rflags,
.set_rflags = svm_set_rflags,
- .fpu_deactivate = svm_fpu_deactivate,
.tlb_flush = svm_flush_tlb,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f5e8dce..811a666 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1567,7 +1567,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
u32 eb;
eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) |
- (1u << NM_VECTOR) | (1u << DB_VECTOR);
+ (1u << DB_VECTOR);
if ((vcpu->guest_debug &
(KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) ==
(KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP))
@@ -1576,8 +1576,6 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
eb = ~0;
if (enable_ept)
eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
- if (vcpu->fpu_active)
- eb &= ~(1u << NM_VECTOR);
/* When we are running a nested L2 guest and L1 specified for it a
* certain exception bitmap, we must trap the same exceptions and pass
@@ -1961,9 +1959,6 @@ static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
{
ulong cr0;
- if (vcpu->fpu_active)
- return;
- vcpu->fpu_active = 1;
cr0 = vmcs_readl(GUEST_CR0);
cr0 &= ~(X86_CR0_TS | X86_CR0_MP);
cr0 |= kvm_read_cr0_bits(vcpu, X86_CR0_TS | X86_CR0_MP);
@@ -1994,33 +1989,6 @@ static inline unsigned long nested_read_cr4(struct vmcs12 *fields)
(fields->cr4_read_shadow & fields->cr4_guest_host_mask);
}
-static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
-{
- /* Note that there is no vcpu->fpu_active = 0 here. The caller must
- * set this *before* calling this function.
- */
- vmx_decache_cr0_guest_bits(vcpu);
- vmcs_set_bits(GUEST_CR0, X86_CR0_TS | X86_CR0_MP);
- update_exception_bitmap(vcpu);
- vcpu->arch.cr0_guest_owned_bits = 0;
- vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
- if (is_guest_mode(vcpu)) {
- /*
- * L1's specified read shadow might not contain the TS bit,
- * so now that we turned on shadowing of this bit, we need to
- * set this bit of the shadow. Like in nested_vmx_run we need
- * nested_read_cr0(vmcs12), but vmcs12->guest_cr0 is not yet
- * up-to-date here because we just decached cr0.TS (and we'll
- * only update vmcs12->guest_cr0 on nested exit).
- */
- struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
- vmcs12->guest_cr0 = (vmcs12->guest_cr0 & ~X86_CR0_TS) |
- (vcpu->arch.cr0 & X86_CR0_TS);
- vmcs_writel(CR0_READ_SHADOW, nested_read_cr0(vmcs12));
- } else
- vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
-}
-
static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
{
unsigned long rflags, save_rflags;
@@ -3575,9 +3543,6 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
if (enable_ept)
ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
- if (!vcpu->fpu_active)
- hw_cr0 |= X86_CR0_TS | X86_CR0_MP;
-
vmcs_writel(CR0_READ_SHADOW, cr0);
vmcs_writel(GUEST_CR0, hw_cr0);
vcpu->arch.cr0 = cr0;
@@ -5066,11 +5031,6 @@ static int handle_exception(struct kvm_vcpu *vcpu)
if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR)
return 1; /* already handled by vmx_vcpu_run() */
- if (is_no_device(intr_info)) {
- vmx_fpu_activate(vcpu);
- return 1;
- }
-
if (is_invalid_opcode(intr_info)) {
if (is_guest_mode(vcpu)) {
kvm_queue_exception(vcpu, UD_VECTOR);
@@ -5263,22 +5223,6 @@ static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val)
return kvm_set_cr4(vcpu, val);
}
-/* called to set cr0 as approriate for clts instruction exit. */
-static void handle_clts(struct kvm_vcpu *vcpu)
-{
- if (is_guest_mode(vcpu)) {
- /*
- * We get here when L2 did CLTS, and L1 didn't shadow CR0.TS
- * but we did (!fpu_active). We need to keep GUEST_CR0.TS on,
- * just pretend it's off (also in arch.cr0 for fpu_activate).
- */
- vmcs_writel(CR0_READ_SHADOW,
- vmcs_readl(CR0_READ_SHADOW) & ~X86_CR0_TS);
- vcpu->arch.cr0 &= ~X86_CR0_TS;
- } else
- vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
-}
-
static int handle_cr(struct kvm_vcpu *vcpu)
{
unsigned long exit_qualification, val;
@@ -5321,10 +5265,6 @@ static int handle_cr(struct kvm_vcpu *vcpu)
}
break;
case 2: /* clts */
- handle_clts(vcpu);
- trace_kvm_cr_write(0, kvm_read_cr0(vcpu));
- skip_emulated_instruction(vcpu);
- vmx_fpu_activate(vcpu);
return 1;
case 1: /*mov from cr*/
switch (cr) {
@@ -9856,19 +9796,16 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
kvm_register_write(vcpu, VCPU_REGS_RIP, vmcs12->host_rip);
vmx_set_rflags(vcpu, X86_EFLAGS_FIXED);
/*
- * Note that calling vmx_set_cr0 is important, even if cr0 hasn't
- * actually changed, because it depends on the current state of
- * fpu_active (which may have changed).
* Note that vmx_set_cr0 refers to efer set above.
*/
vmx_set_cr0(vcpu, vmcs12->host_cr0);
/*
- * If we did fpu_activate()/fpu_deactivate() during L2's run, we need
- * to apply the same changes to L1's vmcs. We just set cr0 correctly,
- * but we also need to update cr0_guest_host_mask and exception_bitmap.
+ * If we did fpu_activate() during L2's run, we need to apply the same
+ * changes to L1's vmcs. We just set cr0 correctly, but we also need
+ * to update cr0_guest_host_mask and exception_bitmap.
*/
update_exception_bitmap(vcpu);
- vcpu->arch.cr0_guest_owned_bits = (vcpu->fpu_active ? X86_CR0_TS : 0);
+ vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
/*
@@ -10177,7 +10114,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
.cache_reg = vmx_cache_reg,
.get_rflags = vmx_get_rflags,
.set_rflags = vmx_set_rflags,
- .fpu_deactivate = vmx_fpu_deactivate,
.tlb_flush = vmx_flush_tlb,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e1a8126..f7597fe 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6236,10 +6236,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
r = 0;
goto out;
}
- if (kvm_check_request(KVM_REQ_DEACTIVATE_FPU, vcpu)) {
- vcpu->fpu_active = 0;
- kvm_x86_ops->fpu_deactivate(vcpu);
- }
if (kvm_check_request(KVM_REQ_APF_HALT, vcpu)) {
/* Page is swapped out. Do synthetic halt */
vcpu->arch.apf.halted = true;
@@ -6296,8 +6292,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
preempt_disable();
kvm_x86_ops->prepare_guest_switch(vcpu);
- if (vcpu->fpu_active)
- kvm_load_guest_fpu(vcpu);
+ kvm_load_guest_fpu(vcpu);
kvm_load_guest_xcr0(vcpu);
vcpu->mode = IN_GUEST_MODE;
@@ -7038,7 +7033,6 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
fpu_save_init(&vcpu->arch.guest_fpu);
__kernel_fpu_end();
++vcpu->stat.fpu_reload;
- kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
trace_kvm_fpu(0);
}
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 82af5d0..c82f798 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -118,7 +118,6 @@ static inline bool is_error_page(struct page *page)
#define KVM_REQ_MMU_SYNC 7
#define KVM_REQ_CLOCK_UPDATE 8
#define KVM_REQ_KICK 9
-#define KVM_REQ_DEACTIVATE_FPU 10
#define KVM_REQ_EVENT 11
#define KVM_REQ_APF_HALT 12
#define KVM_REQ_STEAL_UPDATE 13
@@ -228,7 +227,6 @@ struct kvm_vcpu {
struct mutex mutex;
struct kvm_run *run;
- int fpu_active;
int guest_fpu_loaded, guest_xcr0_loaded;
wait_queue_head_t wq;
struct pid *pid;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists