[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1429954469-27892-1-git-send-email-gabriele.mzt@gmail.com>
Date: Sat, 25 Apr 2015 11:34:29 +0200
From: Gabriele Mazzotta <gabriele.mzt@...il.com>
To: tj@...nel.org
Cc: stripathi@....com, linux-kernel@...r.kernel.org,
linux-ide@...r.kernel.org,
Gabriele Mazzotta <gabriele.mzt@...il.com>
Subject: [PATCH] libata: Ignore spurious PHY events on LPM policy change
When the LPM policy is set to ATA_LPM_MAX_POWER, the device might
generate a spurious PHY event that might cause errors on the link.
Ignore this event if it occurred within 10s after the policy change.
The timeout was chosen observing that on a Dell XPS13 9333 these
spurious events can occur up to roughly 6s after the policy change.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@...il.com>
---
drivers/ata/libahci.c | 13 ++++++++++++-
drivers/ata/libata-eh.c | 3 +++
include/linux/libata.h | 9 +++++++++
3 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 61a9c07..59a2517 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1700,6 +1700,9 @@ static void ahci_handle_port_interrupt(struct ata_port *ap,
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+ unsigned long lpm_timeout = ap->link.last_lpm_change +
+ msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY);
+ bool ignore_event = false;
u32 qc_active = 0;
int rc;
@@ -1707,8 +1710,16 @@ static void ahci_handle_port_interrupt(struct ata_port *ap,
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
+ /* ignore the first PHY event after the LPM policy changed
+ * as it is might be spurious
+ */
+ if ((ap->link.flags & ATA_LFLAG_CHANGED) &&
+ time_before(jiffies, lpm_timeout))
+ ignore_event = true;
+
/* if LPM is enabled, PHYRDY doesn't mean anything */
- if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
+ if (ap->link.lpm_policy > ATA_LPM_MAX_POWER || ignore_event) {
+ ap->link.flags &= ~ATA_LFLAG_CHANGED;
status &= ~PORT_IRQ_PHYRDY;
ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 07f41be..cf0022e 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3597,6 +3597,9 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
}
}
+ link->last_lpm_change = jiffies;
+ link->flags |= ATA_LFLAG_CHANGED;
+
return 0;
fail:
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 8dad4a3..05dbff3 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -205,6 +205,7 @@ enum {
ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */
ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */
ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */
+ ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
@@ -309,6 +310,12 @@ enum {
*/
ATA_TMOUT_PMP_SRST_WAIT = 5000,
+ /* When the LPM policy is set to ATA_LPM_MAX_POWER, there might
+ * be a spurious PHY event, so ignore the first PHY event that
+ * occurs within 10s after the policy change.
+ */
+ ATA_TMOUT_SPURIOUS_PHY = 10000,
+
/* ATA bus states */
BUS_UNKNOWN = 0,
BUS_DMA = 1,
@@ -788,6 +795,8 @@ struct ata_link {
struct ata_eh_context eh_context;
struct ata_device device[ATA_MAX_DEVICES];
+
+ unsigned long last_lpm_change; /* when last LPM change happened */
};
#define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag)
#define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0])
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists