| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1429964096-11524-17-git-send-email-aik@ozlabs.ru>
Date: Sat, 25 Apr 2015 22:14:40 +1000
From: Alexey Kardashevskiy <aik@...abs.ru>
To: linuxppc-dev@...ts.ozlabs.org
Cc: Alexey Kardashevskiy <aik@...abs.ru>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Alex Williamson <alex.williamson@...hat.com>,
Gavin Shan <gwshan@...ux.vnet.ibm.com>,
David Gibson <david@...son.dropbear.id.au>,
linux-kernel@...r.kernel.org
Subject: [PATCH kernel v9 16/32] powerpc/powernv/ioda: Move TCE kill register address to PE
At the moment the DMA setup code looks for the "ibm,opal-tce-kill" property
which contains the TCE kill register address. Writes to this register
invalidates TCE cache on IODA/IODA2 hub.
This moves the register address from iommu_table to pnv_ioda_pe as
later there will be 2 tables per PE and it will be used for both tables.
This moves the property reading/remapping code to a helper to reduce
code duplication.
This adds a new pnv_pci_ioda2_tvt_invalidate() helper which invalidates
the entire table. It should be called after every call to
opal_pci_map_pe_dma_window(). It was not required before because
there is just a single TCE table and 64bit DMA is handled via bypass
window (which has no table so no chache is used) but this is going
to change with Dynamic DMA windows (DDW).
Signed-off-by: Alexey Kardashevskiy <aik@...abs.ru>
---
Changes:
v9:
* new in the series
---
arch/powerpc/platforms/powernv/pci-ioda.c | 69 +++++++++++++++++++------------
arch/powerpc/platforms/powernv/pci.h | 1 +
2 files changed, 44 insertions(+), 26 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f070c44..b22b3ca 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1672,7 +1672,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
struct pnv_ioda_pe, table_group);
__be64 __iomem *invalidate = rm ?
(__be64 __iomem *)pe->tce_inval_reg_phys :
- (__be64 __iomem *)tbl->it_index;
+ pe->tce_inval_reg;
unsigned long start, end, inc;
const unsigned shift = tbl->it_page_shift;
@@ -1743,6 +1743,18 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
.get = pnv_tce_get,
};
+static inline void pnv_pci_ioda2_tvt_invalidate(struct pnv_ioda_pe *pe)
+{
+ /* 01xb - invalidate TCEs that match the specified PE# */
+ unsigned long addr = (0x4ull << 60) | (pe->pe_number & 0xFF);
+
+ if (!pe->tce_inval_reg)
+ return;
+
+ mb(); /* Ensure above stores are visible */
+ __raw_writeq(cpu_to_be64(addr), pe->tce_inval_reg);
+}
+
static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
unsigned long index, unsigned long npages, bool rm)
{
@@ -1751,7 +1763,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
unsigned long start, end, inc;
__be64 __iomem *invalidate = rm ?
(__be64 __iomem *)pe->tce_inval_reg_phys :
- (__be64 __iomem *)tbl->it_index;
+ pe->tce_inval_reg;
const unsigned shift = tbl->it_page_shift;
/* We'll invalidate DMA address in PE scope */
@@ -1803,13 +1815,31 @@ static struct iommu_table_ops pnv_ioda2_iommu_ops = {
.get = pnv_tce_get,
};
+static void pnv_pci_ioda_setup_opal_tce_kill(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ const __be64 *swinvp;
+
+ /* OPAL variant of PHB3 invalidated TCEs */
+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+ if (!swinvp)
+ return;
+
+ /* We need a couple more fields -- an address and a data
+ * to or. Since the bus is only printed out on table free
+ * errors, and on the first pass the data will be a relative
+ * bus number, print that out instead.
+ */
+ pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
+ pe->tce_inval_reg = ioremap(pe->tce_inval_reg_phys, 8);
+}
+
static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe, unsigned int base,
unsigned int segs)
{
struct page *tce_mem = NULL;
- const __be64 *swinvp;
struct iommu_table *tbl;
unsigned int i;
int64_t rc;
@@ -1823,6 +1853,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
if (WARN_ON(pe->tce32_seg >= 0))
return;
+ pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
+
/* Grab a 32-bit TCE table */
pe->tce32_seg = base;
pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
@@ -1865,20 +1897,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
base << 28, IOMMU_PAGE_SHIFT_4K);
/* OPAL variant of P7IOC SW invalidated TCEs */
- swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
- if (swinvp) {
- /* We need a couple more fields -- an address and a data
- * to or. Since the bus is only printed out on table free
- * errors, and on the first pass the data will be a relative
- * bus number, print that out instead.
- */
- pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
- tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
- 8);
+ if (pe->tce_inval_reg)
tbl->it_type |= (TCE_PCI_SWINV_CREATE |
TCE_PCI_SWINV_FREE |
TCE_PCI_SWINV_PAIR);
- }
+
tbl->it_ops = &pnv_ioda1_iommu_ops;
iommu_init_table(tbl, phb->hose->node);
@@ -1984,7 +2007,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
{
struct page *tce_mem = NULL;
void *addr;
- const __be64 *swinvp;
struct iommu_table *tbl;
unsigned int tce_table_size, end;
int64_t rc;
@@ -1993,6 +2015,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
if (WARN_ON(pe->tce32_seg >= 0))
return;
+ pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
+
/* The PE will reserve all possible 32-bits space */
pe->tce32_seg = 0;
end = (1 << ilog2(phb->ioda.m32_pci_base));
@@ -2023,6 +2047,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
goto fail;
}
+ pnv_pci_ioda2_tvt_invalidate(pe);
+
/* Setup iommu */
pe->table_group.tables[0].it_table_group = &pe->table_group;
@@ -2032,18 +2058,9 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
IOMMU_PAGE_SHIFT_4K);
/* OPAL variant of PHB3 invalidated TCEs */
- swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
- if (swinvp) {
- /* We need a couple more fields -- an address and a data
- * to or. Since the bus is only printed out on table free
- * errors, and on the first pass the data will be a relative
- * bus number, print that out instead.
- */
- pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
- tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
- 8);
+ if (pe->tce_inval_reg)
tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
- }
+
tbl->it_ops = &pnv_ioda2_iommu_ops;
iommu_init_table(tbl, phb->hose->node);
#ifdef CONFIG_IOMMU_API
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 368d4ed..bd83d85 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -59,6 +59,7 @@ struct pnv_ioda_pe {
int tce32_segcount;
struct iommu_table_group table_group;
phys_addr_t tce_inval_reg_phys;
+ __be64 __iomem *tce_inval_reg;
/* 64-bit TCE bypass region */
bool tce_bypass_enabled;
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists