| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1430117397-13517-4-git-send-email-s.hauer@pengutronix.de>
Date: Mon, 27 Apr 2015 08:49:56 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: linux-kernel@...r.kernel.org
Cc: gregkh@...uxfoundation.org,
Matthias Brugger <matthias.bgg@...il.com>,
linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-serial@...r.kernel.org,
Alan Cox <alan@...ux.intel.com>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 3/4] tty: serial: 8250_mtk: use pm_runtime callbacks for enabling
The pm_runtime callbacks already enable and disable the device.
Use them in probe() and remove() instead of duplicating the
code. This allows us to concentrate more code for enabling/disabling
the UART in a single place.
Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
---
drivers/tty/serial/8250/8250_mtk.c | 69 ++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 33 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index bcfaa8dc..2f28bd0 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -115,6 +115,29 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
tty_termios_encode_baud_rate(termios, baud, baud);
}
+static int mtk8250_runtime_suspend(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(data->uart_clk);
+
+ return 0;
+}
+
+static int mtk8250_runtime_resume(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+ int err;
+
+ err = clk_prepare_enable(data->uart_clk);
+ if (err) {
+ dev_warn(dev, "Can't enable clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
static void
mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
@@ -130,19 +153,12 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
struct mtk8250_data *data)
{
- int err;
-
data->uart_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->uart_clk)) {
dev_warn(&pdev->dev, "Can't get uart clock\n");
return PTR_ERR(data->uart_clk);
}
- err = clk_prepare_enable(data->uart_clk);
- if (err) {
- dev_warn(&pdev->dev, "Can't prepare clock\n");
- return err;
- }
p->uartclk = clk_get_rate(data->uart_clk);
return 0;
@@ -193,14 +209,18 @@ static int mtk8250_probe(struct platform_device *pdev)
writel(0x0, uart.port.membase +
(MTK_UART_RATE_FIX << uart.port.regshift));
- data->line = serial8250_register_8250_port(&uart);
- if (data->line < 0)
- return data->line;
-
platform_set_drvdata(pdev, data);
- pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ err = mtk8250_runtime_resume(&pdev->dev);
+ if (err)
+ return err;
+ }
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0)
+ return data->line;
return 0;
}
@@ -212,10 +232,13 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
- clk_disable_unprepare(data->uart_clk);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
+
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ mtk8250_runtime_suspend(&pdev->dev);
+
return 0;
}
@@ -239,26 +262,6 @@ static int mtk8250_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM
-static int mtk8250_runtime_suspend(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- clk_disable_unprepare(data->uart_clk);
-
- return 0;
-}
-
-static int mtk8250_runtime_resume(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- clk_prepare_enable(data->uart_clk);
-
- return 0;
-}
-#endif
-
static const struct dev_pm_ops mtk8250_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume,
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists