Message-ID: <20150427130358.GA522233@phare.normalesup.org>
Date:	Mon, 27 Apr 2015 15:03:58 +0200
From:	Nicolas George <george@...p.org>
To:	debian-user@...ts.debian.org, linux-kernel@...r.kernel.org
Subject: ATA resets with Intel 8/C220 and HGST drive

Summary: I had annoying resets of the SATA bus with a 8 Series/C220 Series
Chipset controller and a HGST Travelstar 7K1000 drive. I recently managed to
stop them and as far as I currently know I am satisfied; I write this mail
in the hope that it may be useful for anyone having similar issues. If you
do not have that issue and you are not a developer interested in fixing the
issue more permanently, you can stop reading right now.

Here are the details. The computer is a Zotac ZBox ID91 nettop with a
proprietary motherboard, and, as stated above, a Travelstar 7K1000 hard
drive (a 7200 RPM 2.5", an unusual beast). It was installed around June
2014, and I noticed the problems some time later, they probably started
right away.

The distribution was a Debian Jessie (testing) with the packaged kernel,
probably linux-image-3.14-1-amd64:amd64 at the time; the issue was not fixed
by upgrades.

The possibly relevant hardware information are these:

CPU: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz

CPU:
product: Intel(R) Core(TM) i3-4130T CPU @ 2.90GHz

description: SATA controller
product: 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@...0:00:1f.2
version: 05
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:42 ioport:f0b0(size=8) ioport:f0a0(size=4) ioport:f090(size=8) ioport:f080(size=4) ioport:f060(size=32) memory:f7d1a000-f7d1a7ff

description: ATA Disk
product: HGST HTS721010A9
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: A3J0
serial: [REMOVED]
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=d3079a6d

The resets happened a few times a day (this computer was is kept on for more
than a day and suspend is not used), mostly when the disk was in heavy use,
sometimes as early as during the boot; there was a few good days when they
did not happen. They were annoying because they caused a few seconds freeze
of anything reading from disk; AFAIK they never resulted in data corruption.

The corresponding kernel messages look like this:

[  337.466498] ata2: EH complete
[  367.251032] ata2.00: exception Emask 0x10 SAct 0x80000 SErr 0x400100 action 0x6 frozen
[  367.251041] ata2.00: irq_stat 0x08000000, interface fatal error
[  367.251046] ata2: SError: { UnrecovData Handshk }
[  367.251053] ata2.00: failed command: WRITE FPDMA QUEUED
[  367.251063] ata2.00: cmd 61/08:98:68:3b:40/00:00:6b:00:00/40 tag 19 ncq 4096 out
[  367.251063]          res 50/00:08:68:3b:40/00:00:6b:00:00/40 Emask 0x10 (ATA bus error)
[  367.251068] ata2.00: status: { DRDY }
[  367.251075] ata2: hard resetting link
[  367.571128] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  367.577660] ata2.00: configured for UDMA/133
[  367.577676] ata2: EH complete
[  409.772730] ata2: limiting SATA link speed to 3.0 Gbps
[  409.772735] ata2.00: exception Emask 0x10 SAct 0x3fe00 SErr 0x400100 action 0x6 frozen
[  409.772736] ata2.00: irq_stat 0x08000000, interface fatal error
[  409.772737] ata2: SError: { UnrecovData Handshk }
[  409.772739] ata2.00: failed command: READ FPDMA QUEUED
[  409.772742] ata2.00: cmd 60/08:48:78:09:41/00:00:01:00:00/40 tag 9 ncq 4096 in
[  409.772742]          res 50/00:28:e0:a3:04/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[  409.772743] ata2.00: status: { DRDY }
<snip seven similar "failed command...DRDY" blocks>
[  409.772773] ata2.00: failed command: WRITE FPDMA QUEUED
[  409.772776] ata2.00: cmd 61/28:88:e0:a3:04/00:00:02:00:00/40 tag 17 ncq 20480 out
[  409.772776]          res 50/00:28:e0:a3:04/00:00:02:00:00/40 Emask 0x10 (ATA bus error)
[  409.772777] ata2.00: status: { DRDY }
[  409.772779] ata2: hard resetting link
[  410.092732] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  410.097670] ata2.00: configured for UDMA/133

Last week, hinted by the penultimate line, I tried to lower the speed of the
SATA link permanently, and it worked. I did this by adding
"libata.force=2:3.0Gbps" to the kernel command line (configured using
/etc/default/grub).

Since then, no reset happened; I am confident that seven days without them
are not a coincidence.

As I said, I consider the issue closed from my point of view. If someone
wants to investigate further (for example a kernel hacker to actually fix
this, or a distro developer to make an automatic work-around), I can give
some more details, and possibly run a few tests if they do not take much
time and are not too risky.

Hope this helps.

Regards,

-- 
  Nicolas George

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)

Powered by blists - more mailing lists