linux-kernel - [PATCH 12/13] thermal: thermal: Add support for hardware-tracked trip points

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1430209563-647-13-git-send-email-s.hauer@pengutronix.de>
Date:	Tue, 28 Apr 2015 10:26:02 +0200
From:	Sascha Hauer <s.hauer@...gutronix.de>
To:	linux-pm@...r.kernel.org
Cc:	Zhang Rui <rui.zhang@...el.com>,
	Eduardo Valentin <edubezval@...il.com>,
	linux-kernel@...r.kernel.org,
	Stephen Warren <swarren@...dotorg.org>,
	Mikko Perttunen <mikko.perttunen@...si.fi>,
	kernel@...gutronix.de, linux-mediatek@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org,
	Brian Norris <computersforpeace@...il.com>,
	Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 12/13] thermal: thermal: Add support for hardware-tracked trip points

This adds support for hardware-tracked trip points to the device tree
thermal sensor framework.

The framework supports an arbitrary number of trip points. Whenever
the current temperature is updated, the trip points immediately
below and above the current temperature are found. A .set_trips
callback is then called with the temperatures. If there is no trip
point above or below the current temperature, the passed trip
temperature will be ULONG_MAX or 0 respectively. In this callback,
the driver should program the hardware such that it is notified
when either of these trip points are triggered. When a trip point
is triggered, the driver should call `thermal_zone_device_update'
for the respective thermal zone. This will cause the trip points
to be updated again.

If .set_trips is not implemented, the framework behaves as before.

This patch is based on an earlier version from Mikko Perttunen
<mikko.perttunen@...si.fi>

Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
---
 drivers/thermal/thermal_core.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/thermal.h        |  3 +++
 2 files changed, 45 insertions(+)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 420c702..4e1aaab 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -453,6 +453,45 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
 
+static void thermal_zone_set_trips(struct thermal_zone_device *tz)
+{
+	int low = -INT_MAX;
+	int high = INT_MAX;
+	int trip_temp, hysteresis;
+	int temp = tz->temperature;
+	int i;
+
+	if (!tz->ops->set_trips)
+		return;
+
+	/* No need to change trip points */
+	if (temp > tz->prev_low_trip && temp < tz->prev_high_trip)
+		return;
+
+	for (i = 0; i < tz->trips; i++) {
+		unsigned long trip_low;
+
+		tz->ops->get_trip_temp(tz, i, &trip_temp);
+		tz->ops->get_trip_hyst(tz, i, &hysteresis);
+
+		trip_low = trip_temp - hysteresis;
+
+		if (trip_low < temp && trip_low > low)
+			low = trip_low;
+
+		if (trip_temp > temp && trip_temp < high)
+			high = trip_temp;
+	}
+
+	tz->prev_low_trip = low;
+	tz->prev_high_trip = high;
+
+	dev_dbg(&tz->device, "new temperature boundaries: %d < x < %d\n",
+			low, high);
+
+	tz->ops->set_trips(tz, low, high);
+}
+
 void thermal_zone_device_update(struct thermal_zone_device *tz)
 {
 	int temp, ret, count;
@@ -473,6 +512,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 	mutex_lock(&tz->lock);
 	tz->last_temperature = tz->temperature;
 	tz->temperature = temp;
+	thermal_zone_set_trips(tz);
 	mutex_unlock(&tz->lock);
 
 	trace_thermal_temperature(tz);
@@ -1494,6 +1534,8 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	tz->trips = trips;
 	tz->passive_delay = passive_delay;
 	tz->polling_delay = polling_delay;
+	tz->prev_low_trip = INT_MAX;
+	tz->prev_high_trip = -INT_MAX;
 
 	dev_set_name(&tz->device, "thermal_zone%d", tz->id);
 	result = device_register(&tz->device);
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 07bd5e8..aef6e13 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -87,6 +87,7 @@ struct thermal_zone_device_ops {
 	int (*unbind) (struct thermal_zone_device *,
 		       struct thermal_cooling_device *);
 	int (*get_temp) (struct thermal_zone_device *, int *);
+	int (*set_trips) (struct thermal_zone_device *, int, int);
 	int (*get_mode) (struct thermal_zone_device *,
 			 enum thermal_device_mode *);
 	int (*set_mode) (struct thermal_zone_device *,
@@ -180,6 +181,8 @@ struct thermal_zone_device {
 	int last_temperature;
 	int emul_temperature;
 	int passive;
+	int prev_low_trip;
+	int prev_high_trip;
 	unsigned int forced_passive;
 	const struct thermal_zone_device_ops *ops;
 	const struct thermal_zone_params *tzp;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/