| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150428111334.GQ11956@x1>
Date: Tue, 28 Apr 2015 12:13:34 +0100
From: Lee Jones <lee.jones@...aro.org>
To: "Pallala, Ramakrishna" <ramakrishna.pallala@...el.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Jacob Pan <jacob.jun.pan@...ux.intel.com>
Subject: Re: [PATCH v5] extcon-axp288: Add axp288 extcon driver support
On Tue, 28 Apr 2015, Pallala, Ramakrishna wrote:
> > > This patch adds the extcon support for AXP288 PMIC which has the BC1.2
> > > charger detection capability. Additionally it also adds the USB mux
> > > switching support b/w SOC and PMIC based on GPIO control.
> > >
> > > Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@...el.com>
> > > ---
> > > drivers/extcon/Kconfig | 7 +
> > > drivers/extcon/Makefile | 1 +
> > > drivers/extcon/extcon-axp288.c | 399
> > ++++++++++++++++++++++++++++++++++++++++
> > > include/linux/mfd/axp20x.h | 9 +
> > > 4 files changed, 416 insertions(+)
> > > create mode 100644 drivers/extcon/extcon-axp288.c
> > >
> > > diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index
> > > fdc0bf0..2305edc 100644
> > > --- a/drivers/extcon/Kconfig
> > > +++ b/drivers/extcon/Kconfig
> > > @@ -28,6 +28,13 @@ config EXTCON_ARIZONA
> > > with Wolfson Arizona devices. These are audio CODECs with
> > > advanced audio accessory detection support.
> > >
> > > +config EXTCON_AXP288
> > > + tristate "X-Power AXP288 EXTCON support"
> > > + depends on MFD_AXP20X && USB_PHY
> > > + help
> > > + Say Y here to enable support for USB peripheral detection
> > > + and USB MUX switching by X-Power AXP288 PMIC.
> > > +
> > > config EXTCON_GPIO
> > > tristate "GPIO extcon support"
> > > depends on GPIOLIB
> > > diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index
> > > 9204114..ba787d0 100644
> > > --- a/drivers/extcon/Makefile
> > > +++ b/drivers/extcon/Makefile
> > > @@ -5,6 +5,7 @@
> > > obj-$(CONFIG_EXTCON) += extcon.o
> > > obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
> > > obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
> > > +obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
> > > obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
> > > obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
> > > obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
> > > diff --git a/drivers/extcon/extcon-axp288.c
> > > b/drivers/extcon/extcon-axp288.c new file mode 100644 index
> > > 0000000..91d764c
> > > --- /dev/null
> > > +++ b/drivers/extcon/extcon-axp288.c
> > > @@ -0,0 +1,399 @@
> > > +/*
> > > + * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection
> > > +driver
> > > + *
> > > + * Copyright (C) 2014 Intel Corporation
> > > + * Author: Ramakrishna Pallala <ramakrishna.pallala@...el.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > +modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/io.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/property.h>
> > > +#include <linux/usb/phy.h>
> > > +#include <linux/notifier.h>
> > > +#include <linux/extcon.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/gpio.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/mfd/axp20x.h>
>
> [snip]
>
> > > +module_platform_driver(axp288_extcon_driver);
> > > +
> > > +MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@...el.com>");
> > > +MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
> > > +MODULE_LICENSE("GPL v2");
> > > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> > > index dfabd6d..81152e2 100644
> > > --- a/include/linux/mfd/axp20x.h
> > > +++ b/include/linux/mfd/axp20x.h
> > > @@ -275,4 +275,13 @@ struct axp20x_fg_pdata {
> > > int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
> > > };
> > >
> > > +#define AXP288_EXTCON_CABLE_SDP "SLOW-CHARGER"
> > > +#define AXP288_EXTCON_CABLE_CDP "CHARGE-
> > DOWNSTREAM"
> > > +#define AXP288_EXTCON_CABLE_DCP "FAST-CHARGER"
> >
> > #defines are meant to make things *easier* for humans to read. It is my opinion
> > that these negatively impact the readability of the code.
> These macros will be used in extcon and charger drivers. How can I make it more readable?
If the things you're defining are more readable than the defines
themselves you're doing the opposite of what I'd expect.
How about:
AXP288_EXTCON_SLOW_CHARGER_CABLE
AXP288_EXTCON_FAST_CHARGER_CABLE
AXP288_EXTCON_CHARGE_DOWNSTREAM_CABLE
> > > +struct axp288_extcon_pdata {
> > > + /* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
> > > + struct gpio_desc *gpio_mux_cntl;
> > > +};
> >
> > Are you going to add to this?
> Yes, this is needed.
>
> Thanks,
> Ram
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists