lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <553F1D3A.7010505@linux.vnet.ibm.com>
Date:	Tue, 28 Apr 2015 11:10:10 +0530
From:	Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
To:	Preeti U Murthy <preeti@...ux.vnet.ibm.com>,
	linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org
CC:	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Viresh Kumar <viresh.kumar@...aro.org>,
	linux-pm@...r.kernel.org
Subject: Re: [PATCH 2/2] cpufreq: powernv: Register for OCC related opal_message
 notification

Hi Preeti,

On 04/23/2015 05:28 PM, Preeti U Murthy wrote:
> Hi Shilpa,
> 
> On 04/22/2015 10:34 PM, Shilpasri G Bhat wrote:
>> OCC is an On-Chip-Controller which takes care of power and thermal
>> safety of the chip. During runtime due to power failure or
>> overtemperature the OCC may throttle the frequencies of the CPUs to
>> remain within the power budget.
>>
>> We want the cpufreq driver to be aware of such situations to be able
>> to report it to the user. We register to opal_message_notifier to
>> receive OCC messages from opal.
>>
>> powernv_cpufreq_throttle_check() reports any frequency throttling and
>> this patch will report the reason or event that caused throttling. We
>> can be throttled if OCC is reset or OCC limits Pmax due to power or
>> thermal reasons. We are also notified of unthrottling after an OCC
>> reset or if OCC restores Pmax on the chip.
>>
>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@...ux.vnet.ibm.com>
>> CC: "Rafael J. Wysocki" <rjw@...ysocki.net>
>> CC: Viresh Kumar <viresh.kumar@...aro.org>
>> CC: linux-pm@...r.kernel.org
>> ---
>>  drivers/cpufreq/powernv-cpufreq.c | 70 ++++++++++++++++++++++++++++++++++++++-
>>  1 file changed, 69 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
>> index ebef0d8..5718765 100644
>> --- a/drivers/cpufreq/powernv-cpufreq.c
>> +++ b/drivers/cpufreq/powernv-cpufreq.c
>> @@ -32,6 +32,7 @@
>>  #include <asm/firmware.h>
>>  #include <asm/reg.h>
>>  #include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
>> +#include <asm/opal.h>
>>
>>  #define POWERNV_MAX_PSTATES	256
>>  #define PMSR_PSAFE_ENABLE	(1UL << 30)
>> @@ -40,7 +41,7 @@
>>  #define PMSR_LP(x)		((x >> 48) & 0xFF)
>>
>>  static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
>> -static bool rebooting, throttled;
>> +static bool rebooting, throttled, occ_reset;
>>
>>  /*
>>   * Note: The set of pstates consists of contiguous integers, the
>> @@ -395,6 +396,72 @@ static struct notifier_block powernv_cpufreq_reboot_nb = {
>>  	.notifier_call = powernv_cpufreq_reboot_notifier,
>>  };
>>
>> +static char throttle_reason[6][50] = {	"No throttling",
>> +					"Power Cap",
>> +					"Processor Over Temperature",
>> +					"Power Supply Failure",
>> +					"OverCurrent",
>> +					"OCC Reset"
>> +				     };
>> +
>> +static int powernv_cpufreq_occ_msg(struct notifier_block *nb,
>> +		unsigned long msg_type, void *msg)
>> +{
>> +	struct opal_msg *occ_msg = msg;
>> +	uint64_t token;
>> +	uint64_t chip_id, reason;
>> +
>> +	if (msg_type != OPAL_MSG_OCC)
>> +		return 0;
>> +	token = be64_to_cpu(occ_msg->params[0]);
>> +	switch (token) {
>> +	case 0:
>> +		occ_reset = true;
>> +		/*
>> +		 * powernv_cpufreq_throttle_check() is called in
>> +		 * target() callback which can detect the throttle state
>> +		 * for governors like ondemand.
>> +		 * But static governors will not call target() often thus
>> +		 * report throttling here.
>> +		 */
>> +		if (!throttled) {
>> +			throttled = true;
>> +			pr_crit("CPU Frequency is throttled\n");
>> +		}
>> +		pr_info("OCC in Reset\n");
>> +		break;
>> +	case 1:
>> +		pr_info("OCC is Loaded\n");
>> +		break;
>> +	case 2:
> 
> You may want to replace the numbers with macros. Like
> OCC_RESET,OCC_LOAD, OCC_THROTTLE for better readability.

Okay will do.

> 
>> +		chip_id = be64_to_cpu(occ_msg->params[1]);
>> +		reason = be64_to_cpu(occ_msg->params[2]);
>> +		if (occ_reset) {
>> +			occ_reset = false;
>> +			throttled = false;
>> +			pr_info("OCC is Active\n");
>> +			/* Sanity check for static governors */
>> +			powernv_cpufreq_throttle_check(smp_processor_id());
>> +		} else if (reason) {
>> +			throttled = true;
>> +			pr_info("Pmax reduced due to %s on chip %x\n",
>> +					throttle_reason[reason], (int)chip_id);
>> +		} else {
>> +			throttled = false;
>> +			pr_info("%s on chip %x\n",
>> +					throttle_reason[reason], (int)chip_id);
> 
> Don't you need a powernv_cpufreq_throttle_check() here?  Or is it ok to
> rely on the OCC notification for unthrottle ?

Yes we need to check. Fixing this in v2.

Thanks and Regards,
Shilpa

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ