[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5541EE00.4070500@st.com>
Date: Thu, 30 Apr 2015 10:55:28 +0200
From: Maxime Coquelin <maxime.coquelin@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Peter Griffin <peter.griffin@...aro.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Patrice CHOTARD <patrice.chotard@...com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Lee Jones <lee.jones@...aro.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-mmc <linux-mmc@...r.kernel.org>
Subject: Re: [PATCH v5 0/9] Add sd/emmc support for stih407 family silicon
On 04/30/2015 10:51 AM, Ulf Hansson wrote:
> On 30 April 2015 at 10:28, Maxime Coquelin <maxime.coquelin@...com> wrote:
>> Hi Ulf,
>>
>>
>> On 04/10/2015 01:06 PM, Ulf Hansson wrote:
>>> On 10 April 2015 at 11:40, Peter Griffin <peter.griffin@...aro.org> wrote:
>>>> Hi,
>>>>
>>>> This series adds sd/emmc support to the sdhci-st.c driver for stih407
>>>> family silicon. The changes mainly involve configuring some extra glue
>>>> registers in the flashSS which configure the Arasan controller.
>>>>
>>>> This series also adds support for UHS modes for eMMC. To allow
>>>> UHS HS200/SD104 modes to function correctly, due to the
>>>> tight timing constriants, support for delay management is also added.
>>>> Two types of delay management are supported, static delay management and
>>>> dynamic delay management, this delay management is only available
>>>> on eMMC pads on stih410 and later silicon.
>>>>
>>>> This series has been tested with stih410-b2120 revd on eMMC and sd, at
>>>> various clock speeds. As part of this testing a bug was also found in the
>>>> upstream flexgen clock set_rate implementation (now fixed upstream).
>>>>
>>>> max-frequency = 200Mhz
>>>> /dev/mmcblk0p1:
>>>> Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec
>>>>
>>>> max-frequency = 100Mhz
>>>> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
>>>> /dev/mmcblk0p1:
>>>> Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec
>>>>
>>>> max-frequency = 50Mhz
>>>> root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
>>>> /dev/mmcblk0p1:
>>>> Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec
>>>>
>>>> It has also been tested on stih416-b2020 to ensure we have caused no
>>>> regressions. Finally the dt documentation has been updated to reflect
>>>> the changes in the driver code. Intrestingly it seems we are the first
>>>> upstream platform to be using some of the uhs bindings such as
>>>> sd-uhs-sdr104.
>>>>
>>>> Changes since v4:
>>>> - Fixup typo (Pete)
>>>>
>>>> Changes since v3:
>>>> - Rebased on Ulf's mmc next branch (rc5 based) (Ulf)
>>>>
>>>> Changes since v2:
>>>> - Some whitespace fixups (Max)
>>>> - if (!ioaddr) suggestion (Max)
>>>> - Add stih418-b2199 suport (Max)
>>>> - Stih410 to STiH410 fixes (Max)
>>>> - rebased on v4.0-rc6 (Pete)
>>>>
>>>> Changes since v1:
>>>> - Partition the changes into smaller patches to aid review process
>>>> (Ulf)
>>>>
>>>> Peter Griffin (9):
>>>> mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss
>>>> glue regs
>>>> mmc: sdhci-st: Add support for de-asserting reset signal and top regs
>>>> resource
>>>> mmc: sdhci-st: Add delay management functions for top registers
>>>> (eMMC).
>>>> mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue
>>>> registers.
>>>> mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.
>>>> mmc: sdhci-st: Update the quirks for this controller.
>>>> mmc: sdhci-st: Update ST SDHCI binding documentation.
>>>> ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.
>>>> ARM: STi: DT: STiH418: Add dt nodes for sdhci and emmc.
>>>>
>>>> Documentation/devicetree/bindings/mmc/sdhci-st.txt | 100 +++++-
>>>> arch/arm/boot/dts/stih407-family.dtsi | 30 ++
>>>> arch/arm/boot/dts/stih410-b2120.dts | 10 +
>>>> arch/arm/boot/dts/stih418-b2199.dts | 12 +
>>>> arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 +
>>>> drivers/mmc/host/sdhci-st.c | 354
>>>> ++++++++++++++++++++-
>>>> 6 files changed, 500 insertions(+), 14 deletions(-)
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>> Thanks! Applied.
>> Do you confirm you didn't applied the DT patches?
>>
> Correct. Sorry if that was unclear.
No problem, thanks for the clarification.
Best regards,
Maxime
>
> Kind regards
> Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists