| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fafd86b5dd7e5ca567a112436a488f31a069f822.1430414610.git.shli@fb.com>
Date: Thu, 30 Apr 2015 10:45:17 -0700
From: Shaohua Li <shli@...com>
To: <linux-kernel@...r.kernel.org>
CC: <axboe@...com>, <jmoyer@...hat.com>, <hch@....de>, <neilb@...e.de>
Subject: [PATCH 4/5] blk-mq: do limited block plug for multiple queue case
plug is still helpful for workload with IO merge, but it can be harmful
otherwise especially with multiple hardware queues, as there is
(supposed) no lock contention in this case and plug can introduce
latency. For multiple queues, we do limited plug, eg plug only if there
is request merge. If a request doesn't have merge with following
request, the requet will be dispatched immediately.
This also fixes a bug. If we directly issue a request and it fails, we
use blk_mq_merge_queue_io(). But we already assigned bio to a request in
blk_mq_bio_to_request. blk_mq_merge_queue_io shouldn't run
blk_mq_bio_to_request again.
Cc: Jens Axboe <axboe@...com>
Cc: Christoph Hellwig <hch@....de>
Signed-off-by: Shaohua Li <shli@...com>
---
block/blk-mq.c | 81 ++++++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 59 insertions(+), 22 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 7f9d3a1..5545828 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1224,6 +1224,38 @@ static struct request *blk_mq_map_request(struct request_queue *q,
return rq;
}
+static int blk_mq_direct_issue_request(struct request *rq)
+{
+ int ret;
+ struct request_queue *q = rq->q;
+ struct blk_mq_hw_ctx *hctx = q->mq_ops->map_queue(q,
+ rq->mq_ctx->cpu);
+ struct blk_mq_queue_data bd = {
+ .rq = rq,
+ .list = NULL,
+ .last = 1
+ };
+
+ /*
+ * For OK queue, we are done. For error, kill it. Any other
+ * error (busy), just add it to our list as we previously
+ * would have done
+ */
+ ret = q->mq_ops->queue_rq(hctx, &bd);
+ if (ret == BLK_MQ_RQ_QUEUE_OK)
+ return 0;
+ else {
+ __blk_mq_requeue_request(rq);
+
+ if (ret == BLK_MQ_RQ_QUEUE_ERROR) {
+ rq->errors = -EIO;
+ blk_mq_end_request(rq, rq->errors);
+ return 0;
+ }
+ return -1;
+ }
+}
+
/*
* Multiple hardware queue variant. This will not use per-process plugs,
* but will attempt to bypass the hctx queueing if we can go straight to
@@ -1235,6 +1267,8 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
const int is_flush_fua = bio->bi_rw & (REQ_FLUSH | REQ_FUA);
struct blk_map_ctx data;
struct request *rq;
+ unsigned int request_count = 0;
+ struct blk_plug *plug;
blk_queue_bounce(q, &bio);
@@ -1243,6 +1277,10 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
return;
}
+ if (likely(!is_flush_fua) && !blk_queue_nomerges(q) &&
+ blk_attempt_plug_merge(q, bio, &request_count))
+ return;
+
rq = blk_mq_map_request(q, bio, &data);
if (unlikely(!rq))
return;
@@ -1253,38 +1291,38 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
goto run_queue;
}
+ plug = current->plug;
/*
* If the driver supports defer issued based on 'last', then
* queue it up like normal since we can potentially save some
* CPU this way.
*/
- if (is_sync && !(data.hctx->flags & BLK_MQ_F_DEFER_ISSUE)) {
- struct blk_mq_queue_data bd = {
- .rq = rq,
- .list = NULL,
- .last = 1
- };
- int ret;
+ if ((plug || is_sync) && !(data.hctx->flags & BLK_MQ_F_DEFER_ISSUE)) {
+ struct request *old_rq = NULL;
blk_mq_bio_to_request(rq, bio);
/*
- * For OK queue, we are done. For error, kill it. Any other
- * error (busy), just add it to our list as we previously
- * would have done
+ * we do limited pluging. If bio can be merged, do merge.
+ * Otherwise the existing request in the plug list will be
+ * issued. So the plug list will have one request at most
*/
- ret = q->mq_ops->queue_rq(data.hctx, &bd);
- if (ret == BLK_MQ_RQ_QUEUE_OK)
- goto done;
- else {
- __blk_mq_requeue_request(rq);
-
- if (ret == BLK_MQ_RQ_QUEUE_ERROR) {
- rq->errors = -EIO;
- blk_mq_end_request(rq, rq->errors);
- goto done;
+ if (plug) {
+ if (!list_empty(&plug->mq_list)) {
+ old_rq = list_first_entry(&plug->mq_list,
+ struct request, queuelist);
+ list_del_init(&old_rq->queuelist);
}
- }
+ list_add_tail(&rq->queuelist, &plug->mq_list);
+ } else /* is_sync */
+ old_rq = rq;
+ blk_mq_put_ctx(data.ctx);
+ if (!old_rq)
+ return;
+ if (!blk_mq_direct_issue_request(old_rq))
+ return;
+ blk_mq_insert_request(old_rq, false, true, true);
+ return;
}
if (!blk_mq_merge_queue_io(data.hctx, data.ctx, rq, bio)) {
@@ -1297,7 +1335,6 @@ static void blk_mq_make_request(struct request_queue *q, struct bio *bio)
run_queue:
blk_mq_run_hw_queue(data.hctx, !is_sync || is_flush_fua);
}
-done:
blk_mq_put_ctx(data.ctx);
}
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists