| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 30 Apr 2015 17:39:06 -0700
From: Dan Williams <dan.j.williams@...el.com>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: "linux-nvdimm@...ts.01.org" <linux-nvdimm@...ts.01.org>,
Linux ACPI <linux-acpi@...r.kernel.org>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Robert Moore <robert.moore@...el.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
David Box <david.e.box@...ux.intel.com>
Subject: Re: [PATCH v2 02/20] libnd, nd_acpi: initial libnd infrastructure and
NFIT support
On Thu, Apr 30, 2015 at 4:23 PM, Rafael J. Wysocki <rjw@...ysocki.net> wrote:
> On Tuesday, April 28, 2015 02:24:23 PM Dan Williams wrote:
>> 1/ Autodetect an NFIT table for the ACPI namespace device with _HID of
>> "ACPI0012"
>>
>> 2/ libnd bus registration
>>
>> The NFIT provided by ACPI is one possible method by which platforms will
>> discover NVDIMM resources. However, the intent of the nd_bus_descriptor
>> abstraction is to abstract "provider" specific details, leaving libnd
>> to be independent of the specific NVDIMM resource discovery mechanism.
>> This flexibility is later exploited later to implement custom-defined nd
>> buses.
>>
>> Cc: <linux-acpi@...r.kernel.org>
>> Cc: Robert Moore <robert.moore@...el.com>
>> Cc: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>> Signed-off-by: Dan Williams <dan.j.williams@...el.com>
>> ---
>> drivers/block/Kconfig | 2
>> drivers/block/Makefile | 1
>> drivers/block/nd/Kconfig | 40 +++
>> drivers/block/nd/Makefile | 6 +
>> drivers/block/nd/acpi.c | 475 +++++++++++++++++++++++++++++++++++++++++
>> drivers/block/nd/acpi_nfit.h | 254 ++++++++++++++++++++++
>> drivers/block/nd/core.c | 67 ++++++
>> drivers/block/nd/libnd.h | 33 +++
>> drivers/block/nd/nd-private.h | 23 ++
>> 9 files changed, 901 insertions(+)
>> create mode 100644 drivers/block/nd/Kconfig
>> create mode 100644 drivers/block/nd/Makefile
>> create mode 100644 drivers/block/nd/acpi.c
>> create mode 100644 drivers/block/nd/acpi_nfit.h
>> create mode 100644 drivers/block/nd/core.c
>> create mode 100644 drivers/block/nd/libnd.h
>> create mode 100644 drivers/block/nd/nd-private.h
>>
>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>> index eb1fed5bd516..dfe40e5ca9bd 100644
>> --- a/drivers/block/Kconfig
>> +++ b/drivers/block/Kconfig
>> @@ -321,6 +321,8 @@ config BLK_DEV_NVME
>> To compile this driver as a module, choose M here: the
>> module will be called nvme.
>>
>> +source "drivers/block/nd/Kconfig"
>> +
>> config BLK_DEV_SKD
>> tristate "STEC S1120 Block Driver"
>> depends on PCI
>> diff --git a/drivers/block/Makefile b/drivers/block/Makefile
>> index 9cc6c18a1c7e..07a6acecf4d8 100644
>> --- a/drivers/block/Makefile
>> +++ b/drivers/block/Makefile
>> @@ -24,6 +24,7 @@ obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
>> obj-$(CONFIG_MG_DISK) += mg_disk.o
>> obj-$(CONFIG_SUNVDC) += sunvdc.o
>> obj-$(CONFIG_BLK_DEV_NVME) += nvme.o
>> +obj-$(CONFIG_ND_DEVICES) += nd/
>> obj-$(CONFIG_BLK_DEV_SKD) += skd.o
>> obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o
>>
>> diff --git a/drivers/block/nd/Kconfig b/drivers/block/nd/Kconfig
>> new file mode 100644
>> index 000000000000..6d5d6b732f82
>> --- /dev/null
>> +++ b/drivers/block/nd/Kconfig
>> @@ -0,0 +1,40 @@
>> +menuconfig ND_DEVICES
>> + bool "NVDIMM Support"
>> + depends on PHYS_ADDR_T_64BIT
>> + help
>> + Generic support for non-volatile memory devices including
>> + ACPI-6-NFIT defined resources. On platforms that define an
>> + NFIT, or otherwise can discover NVDIMM resources, a libnd
>> + bus is registered to advertise PMEM (persistent memory)
>> + namespaces (/dev/pmemX) and BLK (sliding mmio window(s))
>> + namespaces (/dev/ndX). A PMEM namespace refers to a memory
>> + resource that may span multiple DIMMs and support DAX (see
>> + CONFIG_DAX). A BLK namespace refers to an NVDIMM control
>> + region which exposes an mmio register set for windowed
>> + access mode to non-volatile memory.
>> +
>> +if ND_DEVICES
>> +
>> +config LIBND
>> + tristate "LIBND: libnd device driver support"
>> + help
>> + Platform agnostic device model for a libnd bus. Publishes
>> + resources for a PMEM (persistent-memory) driver and/or BLK
>> + (sliding mmio window(s)) driver to attach. Exposes a device
>> + topology under a "ndX" bus device, a "/dev/ndctlX" bus-ioctl
>> + message passing interface, and a "/dev/nmemX" dimm-ioctl
>> + message interface for each memory device registered on the
>> + bus. instance. A userspace library "ndctl" provides an API
>> + to enumerate/manage this subsystem.
>> +
>> +config ND_ACPI
>> + tristate "ACPI: NFIT to libnd bus support"
>> + select LIBND
>> + depends on ACPI
>> + help
>> + Infrastructure to probe ACPI 6 compliant platforms for
>> + NVDIMMs (NFIT) and register a libnd device tree. In
>> + addition to storage devices this also enables libnd craft
>> + ACPI._DSM messages for platform/dimm configuration.
>
> I'm wondering if the two CONFIG options above really need to be user-selectable?
>
> For example, what reason people (who've already selected ND_DEVICES) may have
> for not selecting ND_ACPI if ACPI is set?
Later on in the series we introduce ND_E820 which supports creating a
libnd-bus from e820-type-12 memory ranges on pre-NFIT systems. I'm
also considering a configfs defined libnd-bus because e820 types are
not nearly enough information to safely define nvdimm resources
outside of NFIT.
>> +
>> +endif
>> diff --git a/drivers/block/nd/Makefile b/drivers/block/nd/Makefile
>> new file mode 100644
>> index 000000000000..944b5947c0cb
>> --- /dev/null
>> +++ b/drivers/block/nd/Makefile
>> @@ -0,0 +1,6 @@
>> +obj-$(CONFIG_LIBND) += libnd.o
>> +obj-$(CONFIG_ND_ACPI) += nd_acpi.o
>> +
>> +nd_acpi-y := acpi.o
>> +
>> +libnd-y := core.o
>
> OK, so it looks like no modules, just built-in code, right?
>
Um, no, both CONFIG_ND_ACPI and CONFIG_LIBND can be =m.
>> diff --git a/drivers/block/nd/acpi.c b/drivers/block/nd/acpi.c
>> new file mode 100644
>> index 000000000000..9f0b24390d1b
>> --- /dev/null
>> +++ b/drivers/block/nd/acpi.c
>> @@ -0,0 +1,475 @@
>> +/*
>> + * Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of version 2 of the GNU General Public License as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + */
>> +#include <linux/list_sort.h>
>> +#include <linux/module.h>
>> +#include <linux/list.h>
>> +#include <linux/acpi.h>
>> +#include "acpi_nfit.h"
>> +#include "libnd.h"
>> +
>> +static bool warn_checksum;
>> +module_param(warn_checksum, bool, S_IRUGO|S_IWUSR);
>> +MODULE_PARM_DESC(warn_checksum, "Turn checksum errors into warnings");
>> +
>> +enum {
>> + NFIT_ACPI_NOTIFY_TABLE = 0x80,
>> +};
>> +
>> +static int nd_acpi_ctl(struct nd_bus_descriptor *nd_desc,
>> + struct nd_dimm *nd_dimm, unsigned int cmd, void *buf,
>> + unsigned int buf_len)
>> +{
>> + return -ENOTTY;
>> +}
>
> Why -ENOTTY? And why not to leave a NULL entry for this instead and
> make the library fail it in that case?
Yes, I should have deferred this to the patch that fills in
nd_acpi_ctl later in the series. Having this stub here in this patch
just trips up reviewers, sorry.
>> +static const char *spa_type_name(u16 type)
>> +{
>> + switch (type) {
>> + case NFIT_SPA_VOLATILE: return "volatile";
>> + case NFIT_SPA_PM: return "pmem";
>> + case NFIT_SPA_DCR: return "dimm-control-region";
>> + case NFIT_SPA_BDW: return "block-data-window";
>> + default: return "unknown";
>> + }
>> +}
>> +
>> +static int nfit_spa_type(struct acpi_nfit_spa *spa)
>> +{
>> + if (memcmp(&nfit_spa_uuid_volatile, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_VOLATILE;
>> +
>> + if (memcmp(&nfit_spa_uuid_pm, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_PM;
>> +
>> + if (memcmp(&nfit_spa_uuid_dcr, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_DCR;
>> +
>> + if (memcmp(&nfit_spa_uuid_bdw, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_BDW;
>> +
>> + if (memcmp(&nfit_spa_uuid_vdisk, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_VDISK;
>> +
>> + if (memcmp(&nfit_spa_uuid_vcd, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_VCD;
>> +
>> + if (memcmp(&nfit_spa_uuid_pdisk, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_PDISK;
>> +
>> + if (memcmp(&nfit_spa_uuid_pcd, spa->type_uuid, 16) == 0)
>> + return NFIT_SPA_PCD;
>> +
>> + return -1;
>> +}
>> +
>> +struct nfit_table_header {
>> + __le16 type;
>> + __le16 length;
>> +};
>
> That you'll be able to get from ACPICA I suppose?
Yes.
>> +
>> +static void *add_table(struct acpi_nfit_desc *acpi_desc, void *table, const void *end)
>> +{
>> + struct device *dev = acpi_desc->dev;
>> + struct nfit_table_header *hdr;
>> + void *err = ERR_PTR(-ENOMEM);
>> +
>> + if (table >= end)
>> + return NULL;
>> +
>> + hdr = (struct nfit_table_header *) table;
>> + switch (hdr->type) {
>> + case NFIT_TABLE_SPA: {
>> + struct nfit_spa *nfit_spa = devm_kzalloc(dev, sizeof(*nfit_spa),
>> + GFP_KERNEL);
>> + struct acpi_nfit_spa *spa = table;
>> +
>> + if (!nfit_spa)
>> + return err;
>> + INIT_LIST_HEAD(&nfit_spa->list);
>> + nfit_spa->spa = spa;
>> + list_add_tail(&nfit_spa->list, &acpi_desc->spas);
>> + dev_dbg(dev, "%s: spa index: %d type: %s\n", __func__,
>> + spa->spa_index,
>> + spa_type_name(nfit_spa_type(spa)));
>> + break;
>> + }
>> + case NFIT_TABLE_MEM: {
>> + struct nfit_memdev *nfit_memdev = devm_kzalloc(dev,
>> + sizeof(*nfit_memdev), GFP_KERNEL);
>> + struct acpi_nfit_memdev *memdev = table;
>> +
>> + if (!nfit_memdev)
>> + return err;
>> + INIT_LIST_HEAD(&nfit_memdev->list);
>> + nfit_memdev->memdev = memdev;
>> + list_add_tail(&nfit_memdev->list, &acpi_desc->memdevs);
>> + dev_dbg(dev, "%s: memdev handle: %#x spa: %d dcr: %d\n",
>> + __func__, memdev->nfit_handle, memdev->spa_index,
>> + memdev->dcr_index);
>> + break;
>> + }
>> + case NFIT_TABLE_DCR: {
>> + struct nfit_dcr *nfit_dcr = devm_kzalloc(dev, sizeof(*nfit_dcr),
>> + GFP_KERNEL);
>> + struct acpi_nfit_dcr *dcr = table;
>> +
>> + if (!nfit_dcr)
>> + return err;
>> + INIT_LIST_HEAD(&nfit_dcr->list);
>> + nfit_dcr->dcr = dcr;
>> + list_add_tail(&nfit_dcr->list, &acpi_desc->dcrs);
>> + dev_dbg(dev, "%s: dcr index: %d num_bcw: %d\n", __func__,
>> + dcr->dcr_index, dcr->num_bcw);
>> + break;
>> + }
>> + case NFIT_TABLE_BDW: {
>> + struct nfit_bdw *nfit_bdw = devm_kzalloc(dev, sizeof(*nfit_bdw),
>> + GFP_KERNEL);
>> + struct acpi_nfit_bdw *bdw = table;
>> +
>> + if (!nfit_bdw)
>> + return err;
>> + INIT_LIST_HEAD(&nfit_bdw->list);
>> + nfit_bdw->bdw = bdw;
>> + list_add_tail(&nfit_bdw->list, &acpi_desc->bdws);
>> + dev_dbg(dev, "%s: bdw dcr: %d num_bdw: %d\n", __func__,
>> + bdw->dcr_index, bdw->num_bdw);
>> + break;
>> + }
>> + /* TODO */
>> + case NFIT_TABLE_IDT:
>> + dev_dbg(dev, "%s: idt\n", __func__);
>> + break;
>> + case NFIT_TABLE_FLUSH:
>> + dev_dbg(dev, "%s: flush\n", __func__);
>> + break;
>> + case NFIT_TABLE_SMBIOS:
>> + dev_dbg(dev, "%s: smbios\n", __func__);
>> + break;
>> + default:
>> + dev_err(dev, "unknown table '%d' parsing nfit\n", hdr->type);
>> + return ERR_PTR(-ENXIO);
>> + }
>> +
>> + return table + hdr->length;
>> +}
>> +
>> +static void nfit_mem_find_spa_bdw(struct acpi_nfit_desc *acpi_desc,
>> + struct nfit_mem *nfit_mem)
>> +{
>> + u32 nfit_handle = __to_nfit_memdev(nfit_mem)->nfit_handle;
>> + u16 dcr_index = nfit_mem->dcr->dcr_index;
>> + struct nfit_spa *nfit_spa;
>> +
>> + list_for_each_entry(nfit_spa, &acpi_desc->spas, list) {
>> + u16 spa_index = nfit_spa->spa->spa_index;
>> + int type = nfit_spa_type(nfit_spa->spa);
>> + struct nfit_memdev *nfit_memdev;
>> +
>> + if (type != NFIT_SPA_BDW)
>> + continue;
>> +
>> + list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) {
>> + if (nfit_memdev->memdev->spa_index != spa_index)
>> + continue;
>> + if (nfit_memdev->memdev->nfit_handle != nfit_handle)
>> + continue;
>> + if (nfit_memdev->memdev->dcr_index != dcr_index)
>> + continue;
>> +
>> + nfit_mem->spa_bdw = nfit_spa->spa;
>> + return;
>> + }
>> + }
>> +
>> + dev_dbg(acpi_desc->dev, "SPA-BDW not found for SPA-DCR %d\n",
>> + nfit_mem->spa_dcr->spa_index);
>> + nfit_mem->bdw = NULL;
>> +}
>> +
>> +static int nfit_mem_add(struct acpi_nfit_desc *acpi_desc,
>> + struct nfit_mem *nfit_mem, struct acpi_nfit_spa *spa)
>> +{
>> + u16 dcr_index = __to_nfit_memdev(nfit_mem)->dcr_index;
>> + struct nfit_dcr *nfit_dcr;
>> + struct nfit_bdw *nfit_bdw;
>> +
>> + list_for_each_entry(nfit_dcr, &acpi_desc->dcrs, list) {
>> + if (nfit_dcr->dcr->dcr_index != dcr_index)
>> + continue;
>> + nfit_mem->dcr = nfit_dcr->dcr;
>> + break;
>> + }
>> +
>> + if (!nfit_mem->dcr) {
>> + dev_dbg(acpi_desc->dev, "SPA %d missing:%s%s\n", spa->spa_index,
>> + __to_nfit_memdev(nfit_mem) ? "" : " MEMDEV",
>> + nfit_mem->dcr ? "" : " DCR");
>> + return -ENODEV;
>> + }
>> +
>> + /*
>> + * We've found enough to create an nd_dimm, optionally
>> + * find an associated BDW
>> + */
>> + list_add(&nfit_mem->list, &acpi_desc->dimms);
>> +
>> + list_for_each_entry(nfit_bdw, &acpi_desc->bdws, list) {
>> + if (nfit_bdw->bdw->dcr_index != dcr_index)
>> + continue;
>> + nfit_mem->bdw = nfit_bdw->bdw;
>> + break;
>> + }
>> +
>> + if (!nfit_mem->bdw)
>> + return 0;
>> +
>> + nfit_mem_find_spa_bdw(acpi_desc, nfit_mem);
>> + return 0;
>> +}
>> +
>> +static int nfit_mem_dcr_init(struct acpi_nfit_desc *acpi_desc,
>> + struct acpi_nfit_spa *spa)
>> +{
>> + struct nfit_mem *nfit_mem, *found;
>> + struct nfit_memdev *nfit_memdev;
>> + int type = nfit_spa_type(spa);
>> + u16 dcr_index;
>> +
>> + switch (type) {
>> + case NFIT_SPA_DCR:
>> + case NFIT_SPA_PM:
>> + break;
>> + default:
>> + return 0;
>> + }
>> +
>> + list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) {
>> + int rc;
>> +
>> + if (nfit_memdev->memdev->spa_index != spa->spa_index)
>> + continue;
>> + found = NULL;
>> + dcr_index = nfit_memdev->memdev->dcr_index;
>> + list_for_each_entry(nfit_mem, &acpi_desc->dimms, list)
>> + if (__to_nfit_memdev(nfit_mem)->dcr_index == dcr_index) {
>> + found = nfit_mem;
>> + break;
>> + }
>> +
>> + if (found)
>> + nfit_mem = found;
>> + else {
>> + nfit_mem = devm_kzalloc(acpi_desc->dev,
>> + sizeof(*nfit_mem), GFP_KERNEL);
>> + if (!nfit_mem)
>> + return -ENOMEM;
>> + INIT_LIST_HEAD(&nfit_mem->list);
>> + }
>> +
>> + if (type == NFIT_SPA_DCR) {
>> + /* multiple dimms may share a SPA when interleaved */
>> + nfit_mem->spa_dcr = spa;
>> + nfit_mem->memdev_dcr = nfit_memdev->memdev;
>> + } else {
>> + /*
>> + * A single dimm may belong to multiple SPA-PM
>> + * ranges, record at least one in addition to
>> + * any SPA-DCR range.
>> + */
>> + nfit_mem->memdev_pmem = nfit_memdev->memdev;
>> + }
>> +
>> + if (found)
>> + continue;
>> +
>> + rc = nfit_mem_add(acpi_desc, nfit_mem, spa);
>> + if (rc)
>> + return rc;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int nfit_mem_cmp(void *priv, struct list_head *__a, struct list_head *__b)
>> +{
>> + struct nfit_mem *a = container_of(__a, typeof(*a), list);
>> + struct nfit_mem *b = container_of(__b, typeof(*b), list);
>> + u32 handleA, handleB;
>> +
>> + handleA = __to_nfit_memdev(a)->nfit_handle;
>> + handleB = __to_nfit_memdev(b)->nfit_handle;
>> + if (handleA < handleB)
>> + return -1;
>> + else if (handleA > handleB)
>> + return 1;
>> + return 0;
>> +}
>> +
>> +static int nfit_mem_init(struct acpi_nfit_desc *acpi_desc)
>> +{
>> + struct nfit_spa *nfit_spa;
>> +
>> + /*
>> + * For each SPA-DCR or SPA-PMEM address range find its
>> + * corresponding MEMDEV(s). From each MEMDEV find the
>> + * corresponding DCR. Then, if we're operating on a SPA-DCR,
>> + * try to find a SPA-BDW and a corresponding BDW that references
>> + * the DCR. Throw it all into an nfit_mem object. Note, that
>> + * BDWs are optional.
>> + */
>> + list_for_each_entry(nfit_spa, &acpi_desc->spas, list) {
>> + int rc;
>> +
>> + rc = nfit_mem_dcr_init(acpi_desc, nfit_spa->spa);
>> + if (rc)
>> + return rc;
>> + }
>> +
>> + list_sort(NULL, &acpi_desc->dimms, nfit_mem_cmp);
>> +
>> + return 0;
>> +}
>> +
>> +static int nd_acpi_nfit_init(struct acpi_nfit_desc *acpi_desc, acpi_size sz)
>> +{
>> + struct device *dev = acpi_desc->dev;
>> + const void *end;
>> + u8 *data, sum;
>> + acpi_size i;
>> +
>> + INIT_LIST_HEAD(&acpi_desc->spas);
>> + INIT_LIST_HEAD(&acpi_desc->dcrs);
>> + INIT_LIST_HEAD(&acpi_desc->bdws);
>> + INIT_LIST_HEAD(&acpi_desc->memdevs);
>> + INIT_LIST_HEAD(&acpi_desc->dimms);
>> +
>> + data = (u8 *) acpi_desc->nfit;
>> + for (i = 0, sum = 0; i < sz; i++)
>> + sum += readb(data + i);
>> + if (sum != 0 && !warn_checksum) {
>> + dev_dbg(dev, "%s: nfit checksum failure\n", __func__);
>> + return -ENXIO;
>> + }
>> + WARN_TAINT_ONCE(sum != 0, TAINT_FIRMWARE_WORKAROUND,
>> + "nfit checksum failure, continuing...\n");
>> +
>> + end = data + sz;
>> + data += sizeof(struct acpi_nfit);
>> + while (!IS_ERR_OR_NULL(data))
>> + data = add_table(acpi_desc, data, end);
>
> This looks like we are expecting a series of tables here and we're going to
> fail the whole discovery if just one of them in invalid.
>
> I wonder if it would be practical to skip just the invalid ones instead?
Yes, for future-proofing we should just ignore tables that we don't
understand. Will fix.
>
>> +
>> + if (IS_ERR(data)) {
>> + dev_dbg(dev, "%s: nfit table parsing error: %ld\n", __func__,
>> + PTR_ERR(data));
>> + return PTR_ERR(data);
>> + }
>> +
>> + if (nfit_mem_init(acpi_desc) != 0)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +static int nd_acpi_add(struct acpi_device *adev)
>> +{
>> + struct nd_bus_descriptor *nd_desc;
>> + struct acpi_nfit_desc *acpi_desc;
>> + struct device *dev = &adev->dev;
>> + struct acpi_table_header *tbl;
>> + acpi_status status = AE_OK;
>> + acpi_size sz;
>> + int rc;
>> +
>> + status = acpi_get_table_with_size("NFIT", 0, &tbl, &sz);
>> + if (ACPI_FAILURE(status)) {
>> + dev_err(dev, "failed to find NFIT\n");
>> + return -ENXIO;
>> + }
>> +
>> + acpi_desc = devm_kzalloc(dev, sizeof(*acpi_desc), GFP_KERNEL);
>> + if (!acpi_desc)
>> + return -ENOMEM;
>> +
>> + dev_set_drvdata(dev, acpi_desc);
>> + acpi_desc->dev = dev;
>> + acpi_desc->nfit = (struct acpi_nfit *) tbl;
>> + nd_desc = &acpi_desc->nd_desc;
>> + nd_desc->provider_name = "ACPI.NFIT";
>> + nd_desc->ndctl = nd_acpi_ctl;
>> +
>> + acpi_desc->nd_bus = nd_bus_register(dev, nd_desc);
>> + if (!acpi_desc->nd_bus)
>> + return -ENXIO;
>> +
>> + rc = nd_acpi_nfit_init(acpi_desc, sz);
>> + if (rc) {
>> + nd_bus_unregister(acpi_desc->nd_bus);
>> + return rc;
>> + }
>> + return 0;
>> +}
>> +
>> +static int nd_acpi_remove(struct acpi_device *adev)
>> +{
>> + struct acpi_nfit_desc *acpi_desc = dev_get_drvdata(&adev->dev);
>> +
>> + nd_bus_unregister(acpi_desc->nd_bus);
>> + return 0;
>> +}
>> +
>> +static void nd_acpi_notify(struct acpi_device *adev, u32 event)
>> +{
>> + /* TODO: handle ACPI_NOTIFY_BUS_CHECK notification */
>> + dev_dbg(&adev->dev, "%s: event: %d\n", __func__, event);
>> +}
>> +
>> +static const struct acpi_device_id nd_acpi_ids[] = {
>> + { "ACPI0012", 0 },
>> + { "", 0 },
>> +};
>> +MODULE_DEVICE_TABLE(acpi, nd_acpi_ids);
>> +
>> +static struct acpi_driver nd_acpi_driver = {
>> + .name = KBUILD_MODNAME,
>> + .ids = nd_acpi_ids,
>> + .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
>> + .ops = {
>> + .add = nd_acpi_add,
>> + .remove = nd_acpi_remove,
>> + .notify = nd_acpi_notify
>> + },
>> +};
>
> Since this is going to be non-modular built-in code, please use an ACPI
> scan handler instead of using a driver here. acpi_memhotplug.c does that,
> you can use it as an example, but I guess you don't need to enable hotplug
> for it to start with.
No, you misunderstood, this will certainly be modular and loaded on-demand.
>
>> +
>> +static __init int nd_acpi_init(void)
>> +{
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit) != 40);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_spa) != 56);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_memdev) != 48);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_idt) != 16);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_smbios) != 8);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_dcr) != 80);
>> + BUILD_BUG_ON(sizeof(struct acpi_nfit_bdw) != 40);
>> +
>> + return acpi_bus_register_driver(&nd_acpi_driver);
>> +}
>> +
>> +static __exit void nd_acpi_exit(void)
>> +{
>> + acpi_bus_unregister_driver(&nd_acpi_driver);
>> +}
>> +
>> +module_init(nd_acpi_init);
>> +module_exit(nd_acpi_exit);
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Intel Corporation");
>> diff --git a/drivers/block/nd/acpi_nfit.h b/drivers/block/nd/acpi_nfit.h
>> new file mode 100644
>> index 000000000000..e0b0f12736bf
>> --- /dev/null
>> +++ b/drivers/block/nd/acpi_nfit.h
>
> I'm assuming that the below is coordinated with Bob and David and will be
> changed to use ACPICA-provided definitions going forward.
>
> Is that correct?
Yes, as soon as definitions those are available we will drop this
header and rebase on the ACPICA implementation.
[..]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists