[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1430509033-12113-5-git-send-email-aaro.koskinen@iki.fi>
Date: Fri, 1 May 2015 22:37:06 +0300
From: Aaro Koskinen <aaro.koskinen@....fi>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ralf Baechle <ralf@...ux-mips.org>,
David Daney <ddaney.cavm@...il.com>,
David Daney <david.daney@...ium.com>
Cc: devel@...verdev.osuosl.org, linux-mips@...ux-mips.org,
linux-kernel@...r.kernel.org, Aaro Koskinen <aaro.koskinen@....fi>
Subject: [RFC PATCH 04/11] MIPS: OCTEON: move interface enumeration helpers to cvmx-helper
Move interface enumeration helpers to cvmx-helper.
Signed-off-by: Aaro Koskinen <aaro.koskinen@....fi>
---
.../mips/cavium-octeon/executive/cvmx-helper-npi.c | 38 -------
.../cavium-octeon/executive/cvmx-helper-rgmii.c | 46 --------
.../cavium-octeon/executive/cvmx-helper-sgmii.c | 4 -
.../mips/cavium-octeon/executive/cvmx-helper-spi.c | 10 --
.../cavium-octeon/executive/cvmx-helper-xaui.c | 12 ---
arch/mips/cavium-octeon/executive/cvmx-helper.c | 117 +++++++++++++++++++++
arch/mips/include/asm/octeon/cvmx-helper-loop.h | 1 -
7 files changed, 117 insertions(+), 111 deletions(-)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
index cc94cfa..9f7bcc4 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
@@ -38,44 +38,6 @@
#include <asm/octeon/cvmx-pip-defs.h>
/**
- * Probe a NPI interface and determine the number of ports
- * connected to it. The NPI interface should still be down
- * after this call.
- *
- * @interface: Interface to probe
- *
- * Returns Number of ports on the interface. Zero to disable.
- */
-int __cvmx_helper_npi_probe(int interface)
-{
-#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0
- if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))
- return 4;
- else if (OCTEON_IS_MODEL(OCTEON_CN56XX)
- && !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X))
- /* The packet engines didn't exist before pass 2 */
- return 4;
- else if (OCTEON_IS_MODEL(OCTEON_CN52XX)
- && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X))
- /* The packet engines didn't exist before pass 2 */
- return 4;
-#if 0
- /*
- * Technically CN30XX, CN31XX, and CN50XX contain packet
- * engines, but nobody ever uses them. Since this is the case,
- * we disable them here.
- */
- else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX))
- return 2;
- else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
- return 1;
-#endif
-#endif
- return 0;
-}
-
-/**
* Bringup and enable a NPI interface. After this call packet
* I/O should be fully functional. This is called with IPD
* enabled but PKO disabled.
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index f59c88e..730812c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -48,52 +48,6 @@ void __cvmx_interrupt_gmxx_enable(int interface);
void __cvmx_interrupt_asxx_enable(int block);
/**
- * Probe RGMII ports and determine the number present
- *
- * @interface: Interface to probe
- *
- * Returns Number of RGMII/GMII/MII ports (0-4).
- */
-int __cvmx_helper_rgmii_probe(int interface)
-{
- int num_ports = 0;
- union cvmx_gmxx_inf_mode mode;
- mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
-
- if (mode.s.type) {
- if (OCTEON_IS_MODEL(OCTEON_CN38XX)
- || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
- cvmx_dprintf("ERROR: RGMII initialize called in "
- "SPI interface\n");
- } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
- || OCTEON_IS_MODEL(OCTEON_CN30XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
- /*
- * On these chips "type" says we're in
- * GMII/MII mode. This limits us to 2 ports
- */
- num_ports = 2;
- } else {
- cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
- __func__);
- }
- } else {
- if (OCTEON_IS_MODEL(OCTEON_CN38XX)
- || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
- num_ports = 4;
- } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
- || OCTEON_IS_MODEL(OCTEON_CN30XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
- num_ports = 3;
- } else {
- cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
- __func__);
- }
- }
- return num_ports;
-}
-
-/**
* Put an RGMII interface in loopback mode. Internal packets sent
* out will be received back again on the same port. Externally
* received packets will echo back out.
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 6a47b04..03ae748 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -330,10 +330,6 @@ static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
return 0;
}
-int __cvmx_helper_sgmii_enumerate(int interface)
-{
- return 4;
-}
/**
* Probe a SGMII interface and determine the number of ports
* connected to it. The SGMII interface should still be down after
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 1f3030c..a2cf7f1 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -51,16 +51,6 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index);
#define CVMX_HELPER_SPI_TIMEOUT 10
#endif
-int __cvmx_helper_spi_enumerate(int interface)
-{
- if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
- cvmx_spi4000_is_present(interface)) {
- return 10;
- } else {
- return 16;
- }
-}
-
/**
* Probe a SPI interface and determine the number of ports
* connected to it. The SPI interface should still be down after
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index 49d7507..21b7b5a 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -45,18 +45,6 @@ void __cvmx_interrupt_gmxx_enable(int interface);
void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
-int __cvmx_helper_xaui_enumerate(int interface)
-{
- union cvmx_gmxx_hg2_control gmx_hg2_control;
-
- /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
- gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
- if (gmx_hg2_control.s.hg2tx_en)
- return 16;
- else
- return 1;
-}
-
/**
* Probe a XAUI interface and determine the number of ports
* connected to it. The XAUI interface should still be down
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index b531ffa..de6e619 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -301,6 +301,123 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
}
}
EXPORT_SYMBOL_GPL(cvmx_helper_interface_get_mode);
+
+static int __cvmx_helper_loop_enumerate(int interface)
+{
+ return 4;
+}
+
+/**
+ * Probe a NPI interface and determine the number of ports
+ * connected to it. The NPI interface should still be down
+ * after this call.
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_npi_probe(int interface)
+{
+#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))
+ return 4;
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX)
+ && !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X))
+ /* The packet engines didn't exist before pass 2 */
+ return 4;
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX)
+ && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X))
+ /* The packet engines didn't exist before pass 2 */
+ return 4;
+#if 0
+ /*
+ * Technically CN30XX, CN31XX, and CN50XX contain packet
+ * engines, but nobody ever uses them. Since this is the case,
+ * we disable them here.
+ */
+ else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX))
+ return 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
+ return 1;
+#endif
+#endif
+ return 0;
+}
+
+/**
+ * Probe RGMII ports and determine the number present
+ *
+ * @interface: Interface to probe
+ *
+ * Returns Number of RGMII/GMII/MII ports (0-4).
+ */
+int __cvmx_helper_rgmii_probe(int interface)
+{
+ int num_ports = 0;
+ union cvmx_gmxx_inf_mode mode;
+ mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
+
+ if (mode.s.type) {
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
+ cvmx_dprintf("ERROR: RGMII initialize called in "
+ "SPI interface\n");
+ } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
+ || OCTEON_IS_MODEL(OCTEON_CN30XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+ /*
+ * On these chips "type" says we're in
+ * GMII/MII mode. This limits us to 2 ports
+ */
+ num_ports = 2;
+ } else {
+ cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
+ __func__);
+ }
+ } else {
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
+ num_ports = 4;
+ } else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
+ || OCTEON_IS_MODEL(OCTEON_CN30XX)
+ || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+ num_ports = 3;
+ } else {
+ cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n",
+ __func__);
+ }
+ }
+ return num_ports;
+}
+
+int __cvmx_helper_sgmii_enumerate(int interface)
+{
+ return 4;
+}
+
+int __cvmx_helper_spi_enumerate(int interface)
+{
+ if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+ cvmx_spi4000_is_present(interface)) {
+ return 10;
+ } else {
+ return 16;
+ }
+}
+
+int __cvmx_helper_xaui_enumerate(int interface)
+{
+ union cvmx_gmxx_hg2_control gmx_hg2_control;
+
+ /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
+ gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
+ if (gmx_hg2_control.s.hg2tx_en)
+ return 16;
+ else
+ return 1;
+}
+
/**
* Return the number of ports on an interface. Depending on the
* chip and configuration, this can be 1-16. A value of 0
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-loop.h b/arch/mips/include/asm/octeon/cvmx-helper-loop.h
index 077f0e9..e646a6c 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-loop.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-loop.h
@@ -44,7 +44,6 @@
* Returns Number of ports on the interface. Zero to disable.
*/
extern int __cvmx_helper_loop_probe(int interface);
-static inline int __cvmx_helper_loop_enumerate(int interface) {return 4; }
/**
* Bringup and enable a LOOP interface. After this call packet
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists