| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1430718074-11106-2-git-send-email-cw00.choi@samsung.com>
Date: Mon, 04 May 2015 14:41:11 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: linux-kernel@...r.kernel.org
Cc: jaewon02.kim@...sung.com, k.kozlowski@...sung.com,
myungjoo.ham@...sung.com, cw00.choi@...sung.com
Subject: [PATCH v2 1/4] extcon: Unify the jig cable names on rt8973 and
max14577/77693/77843
This patch change the name of various jig cables as 'JIG' because the name of
various jig cables are strange and ambiguous on user-space aspect. They include
the different information of either USB and UART state. It is never important
for user-space process. This patch unifies the name of jig cables as following:
- JIG-USB-ON -->|--> JIG
- JIG-USB-OFF -->|
- JIG-UART-ON -->|
- JIG-UART-OFF -->|
Cc: Jaewon Kim <jaewon02.kim@...sung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@...sung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
---
drivers/extcon/extcon-max14577.c | 19 +++----------------
drivers/extcon/extcon-max77693.c | 23 +++--------------------
drivers/extcon/extcon-max77843.c | 37 ++++++++++++-------------------------
drivers/extcon/extcon-rt8973a.c | 22 +++++-----------------
4 files changed, 23 insertions(+), 78 deletions(-)
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index 3823aa4..6d5febe 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -155,10 +155,7 @@ enum {
EXTCON_CABLE_FAST_CHARGER,
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
- EXTCON_CABLE_JIG_USB_ON,
- EXTCON_CABLE_JIG_USB_OFF,
- EXTCON_CABLE_JIG_UART_OFF,
- EXTCON_CABLE_JIG_UART_ON,
+ EXTCON_CABLE_JIG,
_EXTCON_CABLE_NUM,
};
@@ -169,10 +166,7 @@ static const char *max14577_extcon_cable[] = {
[EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
- [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
- [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
- [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
- [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+ [EXTCON_CABLE_JIG] = "JIG",
NULL,
};
@@ -348,7 +342,6 @@ static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
static int max14577_muic_jig_handler(struct max14577_muic_info *info,
int cable_type, bool attached)
{
- char cable_name[32];
int ret = 0;
u8 path = CTRL1_SW_OPEN;
@@ -358,18 +351,12 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
switch (cable_type) {
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
- /* PATH:AP_USB */
- strcpy(cable_name, "JIG-USB-OFF");
- path = CTRL1_SW_USB;
- break;
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
- strcpy(cable_name, "JIG-USB-ON");
path = CTRL1_SW_USB;
break;
case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
/* PATH:AP_UART */
- strcpy(cable_name, "JIG-UART-OFF");
path = CTRL1_SW_UART;
break;
default:
@@ -382,7 +369,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, cable_name, attached);
+ extcon_set_cable_state(info->edev, "JIG", attached);
return 0;
}
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index a66bec8..1079321 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -209,10 +209,7 @@ enum {
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_MHL,
EXTCON_CABLE_MHL_TA,
- EXTCON_CABLE_JIG_USB_ON,
- EXTCON_CABLE_JIG_USB_OFF,
- EXTCON_CABLE_JIG_UART_OFF,
- EXTCON_CABLE_JIG_UART_ON,
+ EXTCON_CABLE_JIG,
EXTCON_CABLE_DOCK_SMART,
EXTCON_CABLE_DOCK_DESK,
EXTCON_CABLE_DOCK_AUDIO,
@@ -229,10 +226,7 @@ static const char *max77693_extcon_cable[] = {
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
[EXTCON_CABLE_MHL_TA] = "MHL-TA",
- [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
- [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
- [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
- [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
+ [EXTCON_CABLE_JIG] = "JIG",
[EXTCON_CABLE_DOCK_SMART] = "Dock-Smart",
[EXTCON_CABLE_DOCK_DESK] = "Dock-Desk",
[EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio",
@@ -642,7 +636,6 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
static int max77693_muic_jig_handler(struct max77693_muic_info *info,
int cable_type, bool attached)
{
- char cable_name[32];
int ret = 0;
u8 path = CONTROL1_SW_OPEN;
@@ -652,23 +645,13 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
switch (cable_type) {
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
- /* PATH:AP_USB */
- strcpy(cable_name, "JIG-USB-OFF");
- path = CONTROL1_SW_USB;
- break;
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
- strcpy(cable_name, "JIG-USB-ON");
path = CONTROL1_SW_USB;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
- /* PATH:AP_UART */
- strcpy(cable_name, "JIG-UART-OFF");
- path = CONTROL1_SW_UART;
- break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
/* PATH:AP_UART */
- strcpy(cable_name, "JIG-UART-ON");
path = CONTROL1_SW_UART;
break;
default:
@@ -681,7 +664,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state(info->edev, cable_name, attached);
+ extcon_set_cable_state(info->edev, "JIG", attached);
return 0;
}
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 8db6a92..d64aed4 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -127,10 +127,7 @@ enum {
MAX77843_CABLE_SLOW_CHARGER,
MAX77843_CABLE_MHL,
MAX77843_CABLE_MHL_TA,
- MAX77843_CABLE_JIG_USB_ON,
- MAX77843_CABLE_JIG_USB_OFF,
- MAX77843_CABLE_JIG_UART_ON,
- MAX77843_CABLE_JIG_UART_OFF,
+ MAX77843_CABLE_JIG,
MAX77843_CABLE_NUM,
};
@@ -144,10 +141,7 @@ static const char *max77843_extcon_cable[] = {
[MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
[MAX77843_CABLE_MHL] = "MHL",
[MAX77843_CABLE_MHL_TA] = "MHL-TA",
- [MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
- [MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
- [MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
- [MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
+ [MAX77843_CABLE_JIG] = "JIG",
};
struct max77843_muic_irq {
@@ -385,36 +379,29 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
int cable_type, bool attached)
{
int ret;
+ u8 path = CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
- break;
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+ path = CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
- ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
- if (ret < 0)
- return ret;
- extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+ path = CONTROL1_SW_UART;
break;
default:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
- if (ret < 0)
- return ret;
- break;
+ return -EINVAL;
}
+ ret = max77843_muic_set_path(info, path, attached);
+ if (ret < 0)
+ return ret;
+
+ extcon_set_cable_state(info->edev, "JIG", attached);
+
return 0;
}
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index 9ccd5af..8c2194f 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -94,10 +94,7 @@ enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_TA,
- EXTCON_CABLE_JIG_OFF_USB,
- EXTCON_CABLE_JIG_ON_USB,
- EXTCON_CABLE_JIG_OFF_UART,
- EXTCON_CABLE_JIG_ON_UART,
+ EXTCON_CABLE_JIG,
EXTCON_CABLE_END,
};
@@ -106,10 +103,7 @@ static const char *rt8973a_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-Host",
[EXTCON_CABLE_TA] = "TA",
- [EXTCON_CABLE_JIG_OFF_USB] = "JIG-USB-OFF",
- [EXTCON_CABLE_JIG_ON_USB] = "JIG-USB-ON",
- [EXTCON_CABLE_JIG_OFF_UART] = "JIG-UART-OFF",
- [EXTCON_CABLE_JIG_ON_UART] = "JIG-UART-ON",
+ [EXTCON_CABLE_JIG] = "JIG",
NULL,
};
@@ -355,19 +349,13 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
con_sw = DM_DP_SWITCH_OPEN;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
- idx = EXTCON_CABLE_JIG_OFF_USB;
- con_sw = DM_DP_SWITCH_UART;
- break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
- idx = EXTCON_CABLE_JIG_ON_USB;
- con_sw = DM_DP_SWITCH_UART;
+ idx = EXTCON_CABLE_JIG;
+ con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
- idx = EXTCON_CABLE_JIG_OFF_UART;
- con_sw = DM_DP_SWITCH_UART;
- break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
- idx = EXTCON_CABLE_JIG_ON_UART;
+ idx = EXTCON_CABLE_JIG;
con_sw = DM_DP_SWITCH_UART;
break;
case RT8973A_MUIC_ADC_USB:
--
1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists