| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150504225800.GA9362@ASUS-Bernd>
Date: Tue, 5 May 2015 00:58:00 +0200
From: Kast Bernd <kastbernd@....de>
To: corentin.chary@...il.com
Cc: acpi4asus-user@...ts.sourceforge.net,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
corentin.chary@...il.com, dvhart@...radead.org,
mjg59@...f.ucam.org, rjw@...ysocki.net
Subject: [RFC v2] asus-wmi: add fan control
This patch is partially based on Felipe Contrera's earlier patch, that
was discussed here: https://lkml.org/lkml/2013/10/8/800
Some problems of that patch are solved, now:
1) The main obstacle for the earlier patch seemed to be the use of
virt_to_phys, which is accepted, now
2) random memory corruption occurred on my notebook, thus DMA-able memory
is allocated now, which solves this problem
3) hwmon interface is used instead of the thermal interface, as a
hwmon device is already set up by this driver and seemed more
appropriate than the thermal interface
4) Calling the ACPI-functions was modularized thus it's possible to call
some multifunctions easily, now (by using
asus_wmi_evaluate_method_agfn).
Unfortunately the WMI doesn't support controlling both fans on
a dual-fan notebook because of an restriction in the acpi-method
"SFNS", that is callable through the wmi. If "SFNV" would be called
directly even dual fan configurations could be controlled, but not by using
wmi.
Speed readings only work on auto-mode, thus "-1" will be reported in
manual mode.
Additionally the speed readings are reported as hundreds of RPM thus
they are not too precise.
This patch is tested only on one notebook (N551JK) but a similar module,
that contained some code to try to control the second fan also, was
reported to work on an UX32VD, at least for the first fan.
As Felipe already mentioned the low-level functions are described here:
http://forum.notebookreview.com/threads/fan-control-on-asus-prime-ux31-ux31a-ux32a-ux32vd.705656/
Signed-off-by: Kast Bernd <kastbernd@....de>
Cc: Corentin Chary <corentin.chary@...il.com>
Cc: Darren Hart <dvhart@...radead.org>
Cc: Matthew Garrett <mjg59@...f.ucam.org>
Cc: Rafael J. Wysocki <rjw@...ysocki.net>
---
Changes for v2:
suggested by Darren Hart:
- variable ordering from longest to shortest
- fail label removed in asus_wmi_evaluate_method_agfn
- removed unnecessary ternary operator
- used NULL instead of 0
- used DEVICE_ATTR_(RO|RW)
suggested by Corentin Chary:
- asus_hwmon_agfn_fan_speed split to two functions
- added some logging
- used existing function to clamp values
suggested by both:
- updated comments
- tried to return proper error codes
- removed some magic numbers
Thank you very much for your feedback!
drivers/platform/x86/asus-wmi.c | 336 +++++++++++++++++++++++++++++++++++++---
1 file changed, 315 insertions(+), 21 deletions(-)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 7543a56..719e340 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -78,6 +78,7 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_METHODID_GPID 0x44495047 /* Get Panel ID?? (Resol) */
#define ASUS_WMI_METHODID_QMOD 0x444F4D51 /* Quiet MODe */
#define ASUS_WMI_METHODID_SPLV 0x4C425053 /* Set Panel Light Value */
+#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* FaN? */
#define ASUS_WMI_METHODID_SFUN 0x4E554653 /* FUNCtionalities */
#define ASUS_WMI_METHODID_SDSP 0x50534453 /* Set DiSPlay output */
#define ASUS_WMI_METHODID_GDSP 0x50534447 /* Get DiSPlay output */
@@ -150,11 +151,37 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_DSTS_BRIGHTNESS_MASK 0x000000FF
#define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00
+#define ASUS_FAN_DESC "cpu_fan"
+#define ASUS_FAN_MFUN 0x13
+#define ASUS_FAN_SFUN_READ 0x06
+#define ASUS_FAN_SFUN_WRITE 0x07
+#define ASUS_FAN_CTRL_MANUAL 1
+#define ASUS_FAN_CTRL_AUTO 2
+
+
struct bios_args {
u32 arg0;
u32 arg1;
} __packed;
+/* struct that's used for all methods called via AGFN. Naming is
+ * identically to the AML code
+*/
+struct agfn_args {
+ u16 mfun; /* probably "Multi-function" to be called */
+ u16 sfun; /* probably "Sub-function" to be called */
+ u16 len; /* size of the hole struct, including subfunction fields */
+ u8 stas; /* not used by now */
+ u8 err; /* zero on success */
+} __packed;
+
+/* struct used for calling fan read and write methods */
+struct fan_args {
+ struct agfn_args agfn; /* common fields */
+ u8 fan; /* fan number: 0: set auto mode 1: 1st fan */
+ u32 speed; /* read: RPM/100 - write: 0-255 */
+} __packed;
+
/*
* <platform>/ - debugfs root directory
* dev_id - current dev_id
@@ -204,6 +231,10 @@ struct asus_wmi {
struct asus_rfkill gps;
struct asus_rfkill uwb;
+ int asus_hwmon_pwm;
+ int asus_hwmon_num_fans;
+ bool asus_hwmon_fan_manual_mode;
+
struct hotplug_slot *hotplug_slot;
struct mutex hotplug_lock;
struct mutex wmi_lock;
@@ -294,6 +325,35 @@ exit:
return 0;
}
+static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
+{
+ struct acpi_buffer input;
+ u64 phys_addr;
+ u32 retval;
+ u32 status = -1;
+
+ /* copy to dma capable address otherwise memory corruption occurs as
+ * bios has to be able to access it
+ */
+ input.pointer = kzalloc(args.length, GFP_DMA | GFP_KERNEL);
+ input.length = args.length;
+ if (!input.pointer)
+ return -ENOMEM;
+ phys_addr = virt_to_phys(input.pointer);
+ memcpy(input.pointer, args.pointer, args.length);
+
+ status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN,
+ phys_addr, 0, &retval);
+ if (!status)
+ memcpy(args.pointer, input.pointer, args.length);
+
+ kfree(input.pointer);
+ if (!status)
+ return retval;
+ else
+ return -ENXIO;
+}
+
static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
{
return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval);
@@ -1022,35 +1082,221 @@ exit:
/*
* Hwmon device
*/
-static ssize_t asus_hwmon_pwm1(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_READ,
+ .fan = fan,
+ .speed = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ int status;
+
+ if (fan != 1)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (!speed)
+ return 0;
+
+ *speed = args.speed;
+
+ return 0;
+}
+
+static int asus_hwmon_agfn_fan_speed_write(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ int status;
+
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_WRITE,
+ .fan = fan,
+ .speed = speed ? *speed : 0,
+ };
+
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+
+ /* 1: for setting 1st fan's speed 0: setting auto mode */
+ if (fan != 1 && fan != 0)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (!speed)
+ return 0;
+ if (fan == 1)
+ asus->asus_hwmon_pwm = *speed;
+
+ return 0;
+}
+
+/*
+ * Check if we can read the speed of one fan. If true we assume we can also
+ * control it
+*/
+static int asus_hwmon_get_fan_number(struct asus_wmi *asus, int *num_fans)
+{
+ int status;
+ int speed = 0;
+
+ *num_fans = 0;
+
+ status = asus_hwmon_agfn_fan_speed_read(asus, 1, &speed);
+ if (status)
+ return 0;
+
+ *num_fans = 1;
+ return 0;
+}
+
+static int asus_hwmon_fan_set_auto(struct asus_wmi *asus)
+{
+ int status;
+
+ status = asus_hwmon_agfn_fan_speed_write(asus, 0, NULL);
+ if (!status) {
+ asus->asus_hwmon_fan_manual_mode = false;
+ return 0;
+ } else {
+ return -ENXIO;
+ }
+}
+
+static int asus_hwmon_fan_rpm_show(struct device *dev, int fan)
{
struct asus_wmi *asus = dev_get_drvdata(dev);
- u32 value;
+ int value;
+ int state;
+
+ /* no speed readable on manual mode */
+ if (asus->asus_hwmon_fan_manual_mode) {
+ value = -ENXIO;
+ } else {
+ state = asus_hwmon_agfn_fan_speed_read(asus, fan+1, &value);
+ if (state) {
+ value = -ENXIO;
+ pr_warn("reading fan speed failed: %d\n", state);
+ }
+ }
+ return value;
+}
+
+static void asus_hwmon_pwm_show(struct asus_wmi *asus, int fan, int *value)
+{
int err;
- err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value);
+ if (asus->asus_hwmon_pwm >= 0) {
+ *value = asus->asus_hwmon_pwm;
+ return;
+ }
+ err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, value);
if (err < 0)
- return err;
+ return;
- value &= 0xFF;
-
- if (value == 1) /* Low Speed */
- value = 85;
- else if (value == 2)
- value = 170;
- else if (value == 3)
- value = 255;
- else if (value != 0) {
- pr_err("Unknown fan speed %#x\n", value);
- value = -1;
+ *value &= 0xFF;
+
+ if (*value == 1) /* Low Speed */
+ *value = 85;
+ else if (*value == 2)
+ *value = 170;
+ else if (*value == 3)
+ *value = 255;
+ else if (*value) {
+ pr_err("Unknown fan speed %#x\n", *value);
+ *value = -1;
}
+}
+
+static ssize_t pwm1_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+ asus_hwmon_pwm_show(asus, 0, &value);
return sprintf(buf, "%d\n", value);
}
+static ssize_t pwm1_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count) {
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+ int state;
+
+ kstrtouint(buf, 10, &value);
+ value = clamp(value, 0, 255);
+
+ state = asus_hwmon_agfn_fan_speed_write(asus, 1, &value);
+ if (state)
+ pr_warn("Setting fan speed failed: %d\n", state);
+ else
+ asus->asus_hwmon_fan_manual_mode = true;
+
+ return count;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int value = asus_hwmon_fan_rpm_show(dev, 0);
+
+ return sprintf(buf, "%d\n", value < 0 ? -1 : value*100);
+
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+
+ if (asus->asus_hwmon_fan_manual_mode)
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_MANUAL);
+ else
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_AUTO);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int state;
+ int status;
+
+ kstrtouint(buf, 10, &state);
+ if (state == ASUS_FAN_CTRL_MANUAL)
+ asus->asus_hwmon_fan_manual_mode = true;
+ else
+ status = asus_hwmon_fan_set_auto(asus);
+
+ return count;
+}
+
+static ssize_t fan1_label_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", ASUS_FAN_DESC);
+}
+
static ssize_t asus_hwmon_temp1(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -1069,11 +1315,21 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
return sprintf(buf, "%d\n", value);
}
-static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+/* Fan1 */
+static DEVICE_ATTR_RW(pwm1);
+static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RO(fan1_input);
+static DEVICE_ATTR_RO(fan1_label);
+
+/* Temperature */
static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
static struct attribute *hwmon_attributes[] = {
&dev_attr_pwm1.attr,
+ &dev_attr_pwm1_enable.attr,
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_label.attr,
+
&dev_attr_temp1_input.attr,
NULL
};
@@ -1084,19 +1340,28 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct platform_device *pdev = to_platform_device(dev->parent);
struct asus_wmi *asus = platform_get_drvdata(pdev);
- bool ok = true;
int dev_id = -1;
+ int fan_attr = -1;
u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+ bool ok = true;
if (attr == &dev_attr_pwm1.attr)
dev_id = ASUS_WMI_DEVID_FAN_CTRL;
else if (attr == &dev_attr_temp1_input.attr)
dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
+
+ if (attr == &dev_attr_fan1_input.attr
+ || attr == &dev_attr_fan1_label.attr
+ || attr == &dev_attr_pwm1.attr
+ || attr == &dev_attr_pwm1_enable.attr) {
+ fan_attr = 1;
+ }
+
if (dev_id != -1) {
int err = asus_wmi_get_devstate(asus, dev_id, &value);
- if (err < 0)
+ if (err < 0 && fan_attr == -1)
return 0; /* can't return negative here */
}
@@ -1112,10 +1377,16 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
|| (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
ok = false;
+ else
+ ok = fan_attr <= asus->asus_hwmon_num_fans;
} else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
/* If value is zero, something is clearly wrong */
- if (value == 0)
+ if (!value)
ok = false;
+ } else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
+ ok = true;
+ } else {
+ ok = false;
}
return ok ? attr->mode : 0;
@@ -1723,6 +1994,25 @@ error_debugfs:
return -ENOMEM;
}
+static int asus_wmi_fan_init(struct asus_wmi *asus)
+{
+ int status;
+
+ asus->asus_hwmon_pwm = -1;
+ asus->asus_hwmon_num_fans = -1;
+ asus->asus_hwmon_fan_manual_mode = false;
+
+ status = asus_hwmon_get_fan_number(asus, &asus->asus_hwmon_num_fans);
+ if (status) {
+ asus->asus_hwmon_num_fans = 0;
+ pr_warn("Could not determine number of fans: %d\n", status);
+ return -ENXIO;
+ }
+
+ pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+ return 0;
+}
+
/*
* WMI Driver
*/
@@ -1756,6 +2046,9 @@ static int asus_wmi_add(struct platform_device *pdev)
if (err)
goto fail_input;
+ err = asus_wmi_fan_init(asus); /* probably no problems on error */
+ asus_hwmon_fan_set_auto(asus);
+
err = asus_wmi_hwmon_init(asus);
if (err)
goto fail_hwmon;
@@ -1832,6 +2125,7 @@ static int asus_wmi_remove(struct platform_device *device)
asus_wmi_rfkill_exit(asus);
asus_wmi_debugfs_exit(asus);
asus_wmi_platform_exit(asus);
+ asus_hwmon_fan_set_auto(asus);
kfree(asus);
return 0;
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists