linux-kernel - Re: [PATCH] dmaengine: pl300: enable the clock to PL330 dma

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 5 May 2015 14:22:38 -0500
From:	Dinh Nguyen <dinguyen@...nsource.altera.com>
To:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
CC:	<dan.j.williams@...el.com>, Dinh Nguyen <dinh.linux@...il.com>,
	<vinod.koul@...el.com>, <dmaengine@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, olof Johansson <olof@...om.net>
Subject: Re: [PATCH] dmaengine: pl300: enable the clock to PL330 dma

On 05/05/2015 09:56 AM, Dinh Nguyen wrote:
> On 05/04/2015 10:55 PM, Krzysztof Kozlowski wrote:
>> 2015-05-05 4:52 GMT+09:00 Dinh Nguyen <dinguyen@...nsource.altera.com>:
>>> On 05/04/2015 09:06 AM, Dinh Nguyen wrote:
>>>> +CC Olof
>>>>
>>>> On 5/4/15 8:50 AM, Krzysztof Kozlowski wrote:
>>>>> 2015-05-04 22:28 GMT+09:00 Dinh Nguyen <dinguyen@...nsource.altera.com>:
>>>>>> Hi Krzystof,
>>>>>>
>>>>>> On 5/4/15 12:30 AM, Krzysztof Kozlowski wrote:
>>>>>>> 2015-05-04 13:28 GMT+09:00  <dinguyen@...nsource.altera.com>:
>>>>>>>> From: Dinh Nguyen <dinguyen@...nsource.altera.com>
>>>>>>>>
>>>>>>>> Turn on the clock to the PL330 DMA if there is a clock node provided.
>>>>>>>
>>>>>>> Why? There is no explanation in the patch for this important question - why?
>>>>>>>
>>>>>>> Amba bus already does this and provide a wrapper function.
>>>>>>> Additionally that would mess up with runtime PM and clock
>>>>>>> enable/disable.
>>>>>>
>>>>>> I don't see the clock for the DMA getting turned on at all, which is why
>>>>>> after the kernel has booted, the filesystem tries to open up a serial
>>>>>> port using DMA and the system hangs. The failure is seen here:
>>>>>>
>>>>>> http://arm-soc.lixom.net/bootlogs/next/next-20150504/socfpga-arm-multi_v7_defconfig.html
>>>>>
>>>>> Thanks!
>>>>>
>>>>> The amba bus and pl330 should enable the clock and then disable it
>>>>> after probing:
>>>>> static int amba_probe(struct device *dev)
>>>>> {
>>>>> ...
>>>>>         ret = amba_get_enable_pclk(pcdev);
>>>>> ...
>>>>>
>>>>> I wonder why do you think it is not enabled at all?
>>>>
>>>> I've checked it down to the register level that the gate for this clock
>>>> does not get set.
>>>>
>>>>>
>>>>>>
>>>>>> This only happens with the multi_v7_defconfig, because the PL330 DMA is
>>>>>> getting built into the kernel, while the socfpga_defconfig does not
>>>>>> enable the PL330.
>>>>>
>>>>> It makes sense. If pl330 driver is not enabled then necessary clocks
>>>>> are turned on by bootloader. Probing pl330 effectively disables the
>>>>> clock (if DMA is not used).
>>>>>
>>>>>> The DTS for the socfpga platform looks like this:
>>>>>>
>>>>>> pdma: pdma@...01000 {
>>>>>>         compatible = "arm,pl330", "arm,primecell";
>>>>>>         reg = <0xffe01000 0x1000>;
>>>>>>         interrupts = <0 104 4>,
>>>>>>                     <0 105 4>,
>>>>>>                 ...
>>>>>>                 #dma-cells = <1>;
>>>>>>                 #dma-channels = <8>;
>>>>>>                 #dma-requests = <32>;
>>>>>>                 clocks = <&l4_main_clk>;
>>>>>>                 clock-names = "apb_pclk";
>>>>>> };
>>>>>>
>>>>>> Perhaps I have the wrong designation for clock-names and the amba bus is
>>>>>> not able to pick up the correct clock?
>>>>>
>>>>> I have two ideas:
>>>>> 1. Is this really the clock for the DMA? If DMA is not used then
>>>>> disabling it should be OK.
>>>>
>>>> Yes, this is the clock for the DMA. Yeah, leaving this clock off is
>>>> fine, until the DMA gets used. Up until v4.0, SoCFPGA was not using the
>>>> DMA at all, but in v4.0, there was a patch to assign the UARTs to it's
>>>> DMA channel.
>>>>
>>>> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/arch/arm/boot/dts/socfpga.dtsi?id=78c03c7af89721bd8a4428408a8cc7b53972e4b8
>>>>
>>>>> 2. Disabling the clock may effectively disable its parent or
>>>>> grandparent if there are not more users. Maybe some other driver needs
>>>>> these parents to be enabled? This was the issue for at least one
>>>>> similar error (on Exynos boards).
>>>>>
>>>>
>>>> I'll check up on these issues. When I was debugging this issue, the
>>>> l4_main_clk is only used by the DMA, so it was not getting turned on by
>>>> an other drivers.
>>>>
>>>
>>> Ah, it looks like perhaps there's a problem with the serial driver and
>>> suspend/resume? If disable CONFIG_PM, then the DMA seems to be working
>>> fine with the debug uart. It appears the DMA is getting suspended and
>>> doesn't get resumed.
>>>
>>
>> You mean runtime PM suspend and resume or system sleep? During boot
>> only the first one should happen.
> 
> It's runtime PM suspend/resume.
> 
>>
>> Could you test the DMA with dmatest? Disable the DMA in UART and
>> compile with CONFIG_DMATEST. Syntax for testing is here:
>> Documentation/dmaengine/dmatest.txt
>>
> 
> # echo Y > /sys/module/dmatest/parameters/run
> [   93.143775] dmatest: Started 1 threads using dma0chan0
> [   93.149227] pm_generic_runtime_resume
> [   93.153334] dmatest: Started 1 threads using dma0chan1
> [   93.159380] dmatest: Started 1 threads using dma0chan2
> [   93.165041] dmatest: Started 1 threads using dma0chan3
> [   93.170280] dmatest: Started 1 threads using dma0chan4
> [   93.175996] dmatest: Started 1 threads using dma0chan5
> [   93.181642] dmatest: Started 1 threads using dma0chan6
> [   93.188754] dmatest: dma0chan1-copy0: summary 10 tests, 0 failures
> 282 iops 2008 KB/s (0)
> [   93.197091] dmatest: Started 1 threads using dma0chan7
> [   93.199353] dmatest: dma0chan3-copy0: summary 10 tests, 0 failures
> 297 iops 2260 KB/s (0)
> [   93.205407] dmatest: dma0chan0-copy0: summary 10 tests, 0 failures
> 177 iops 1364 KB/s (0)
> [   93.215599] dmatest: dma0chan2-copy0: summary 10 tests, 0 failures
> 196 iops 1450 KB/s (0)
> [   93.219994] dmatest: dma0chan4-copy0: summary 10 tests, 0 failures
> 225 iops 1554 KB/s (0)
> [   93.224322] dmatest: dma0chan5-copy0: summary 10 tests, 0 failures
> 231 iops 1948 KB/s (0)
> [   93.230065] dmatest: dma0chan6-copy0: summary 10 tests, 0 failures
> 231 iops 1759 KB/s (0)
> [   93.231251] dmatest: dma0chan7-copy0: summary 10 tests, 0 failures
> 298 iops 2331 KB/s (0)
> [   93.243523] pm_generic_runtime_suspend
> root@...fpga_cyclone5:~#
> 

If I run dmatest the 2nd time it fails. It does not look like
amba_pm_runtime_resume() is getting called to turn on the clocks on the
subsequent tries.

Dinh



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/