[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 05 May 2015 08:17:01 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Patrick Lai <plai@...eaurora.org>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Banajit Goswami <bgoswami@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, linux-arm-msm@...r.kernel.org
Subject: Re: [RFC PATCH 14/14] ASoC: qcom: document apq8016 machine driver
bindings
On 03/05/15 01:03, Kenneth Westfield wrote:
> On Thu, Apr 30, 2015 at 06:18:26PM +0100, Srinivas Kandagatla wrote:
>> This patch adds bindings for apq8016 machine driver.
>> On APQ8016 4 MI2S can be configured to different sinks like internal
>> codec/external codec, this connection is controlled via 2 iomux
>> registers.
>>
>> +sound: sound {
>> + compatible = "qcom,apq8016-sndcard";
>> + reg = <0x07702000 0x4>, <0x07702004 0x4>;
>> + reg-names = "mic-iomux", "spkr-iomux";
>> + qcom,model = "DB410c";
>> +
>> + /* I2S - Internal codec */
>> + internal-dai-link@0 {
>> + cpu { /* PRIMARY */
>> + sound-dai = <&lpass MI2S_PRIMARY>;
>> + };
>> + codec {
>> + sound-dai = <&wcd_codec 0>;
>> + };
>> + };
>> +
>> + /* External Primary or External Secondary -ADV7533 HDMI */
>> + external-dai-link@0 {
>> + external;
>> + cpu { /* QUAT */
>> + sound-dai = <&lpass MI2S_QUATERNARY>;
>> + };
>> + codec {
>> + sound-dai = <&adv_bridge 0>;
>> + };
>> + };
>> +};
>
> OK, although I will need to double-check this with the spec, it seems
> (from the patches) that there are 4 I2S ports, 2 of which are being
> used. Usually, multi-channel audio is sent to the primary dai (which
> is MI2S), which then gets sent to the other ports by HW. If that holds
> true for this SOC, then the external cpu dai should be labelled I2S,
> not MI2S. If not, then both should be labelled as I2S (and the DAI
> channel constraints should be reduced to 1-2).
>
I have got very limited access to documentation, which obviously does
not have any info related to channel capabilities. I was thinking that
all the playback ports support multi-channel. I might be wrong though.
> Looking at patch 12, the internal DAI is labelled Headset and the
> external DAI is labelled HDMI.
This naming is very specific to the SBC board.
I will check the spec to see if the QUAT
> I2S port can handle multi-channel.
External HDMI bridge on the other side only supports 2-channels, but if
you can re-check on the channel capabilities would be good.
--srini
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists