| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 May 2015 00:03:30 +0000
From: "Pinski, Andrew" <Andrew.Pinski@...iumnetworks.com>
To: Philipp Tomsich <philipp.tomsich@...obroma-systems.com>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Andrew Pinski <apinski@...ium.com>,
Christoph Muellner <christoph.muellner@...obroma-systems.com>,
"Benedikt Huber" <benedikt.huber@...obroma-systems.com>,
Andreas Kraschitzer <andreas.kraschitzer@...obroma-systems.com>,
Kumar Sankaran <ksankaran@....com>,
Catalin Marinas <catalin.marinas@....com>
Subject: Re: [PATCH v4 22/24] arm64:ilp32: use compat for stack_t
> On Apr 13, 2015, at 1:18 PM, Philipp Tomsich <philipp.tomsich@...obroma-systems.com> wrote:
>
> We use a 'natively sized' stack_t in glibc (i.e. having a 32bit pointer for
> ss_sp), which requires the invocation of the compat layer for the following
> functionality:
> * sigaltstack
> * saving and restoring uc_stack during signal setup and returns
Can you explain why you want to use a natively sized stack_t? My patches for glibc included changing stack_t too. I would rather keep the same size stack_t between lp64 and ilp32 due easier gdb support.
Thanks,
Andrew
>
> As the userspace stack_t is natively sized, we avoid code duplication in the
> syscall table and can use the compat-functions to zero-extend the pointers
> involved.
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich@...obroma-systems.com>
> Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
> ---
> arch/arm64/kernel/signal.c | 19 +++++++++++++++++++
> arch/arm64/kernel/sys_ilp32.c | 44 +------------------------------------------
> 2 files changed, 20 insertions(+), 43 deletions(-)
>
> diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
> index 99e36be..b3f6e52 100644
> --- a/arch/arm64/kernel/signal.c
> +++ b/arch/arm64/kernel/signal.c
> @@ -34,6 +34,7 @@
> #include <asm/fpsimd.h>
> #include <asm/signal32.h>
> #include <asm/vdso.h>
> +#include <asm/syscalls.h>
>
> /*
> * Do a signal return; undo the signal stack. These are aligned to 128-bit.
> @@ -148,9 +149,22 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
> if (restore_sigframe(regs, frame))
> goto badframe;
>
> +
> +#if defined(CONFIG_ARM64_ILP32)
> + if (is_ilp32_compat_task()) {
> + /* For ILP32, we have a different stack_t (the ss_sp
> + field will be only 32bit sized), which fits into
> + the memory area reserved for the (larger) LP64
> + stack_t and which we place into uc_stack: this
> + implies padding after the ILP32 stack_t. */
> + if (compat_restore_altstack((compat_stack_t*)&frame->uc.uc_stack))
> + goto badframe;
> + } else
> +#endif
> if (restore_altstack(&frame->uc.uc_stack))
> goto badframe;
>
> +
> return regs->regs[0];
>
> badframe:
> @@ -264,6 +278,11 @@ static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
> __put_user_error(0, &frame->uc.uc_flags, err);
> __put_user_error(NULL, &frame->uc.uc_link, err);
>
> +#if defined(CONFIG_ARM64_ILP32)
> + if (is_ilp32_compat_task())
> + err |= __compat_save_altstack((compat_stack_t*)&frame->uc.uc_stack, regs->sp);
> + else
> +#endif
> err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
> err |= setup_sigframe(frame, regs, set);
> if (err == 0) {
> diff --git a/arch/arm64/kernel/sys_ilp32.c b/arch/arm64/kernel/sys_ilp32.c
> index 3471f27..31f82ca 100644
> --- a/arch/arm64/kernel/sys_ilp32.c
> +++ b/arch/arm64/kernel/sys_ilp32.c
> @@ -77,6 +77,7 @@
>
> /* Pointer in struct */
> #define sys_mount compat_sys_mount
> +#define sys_sigaltstack compat_sys_sigaltstack
>
> /* NUMA */
> /* unsigned long bitmaps */
> @@ -122,49 +123,6 @@ asmlinkage long ilp32_sys_mq_notify(mqd_t mqdes, const struct sigevent __user *u
> but need special handling due to padding for SIGEV_THREAD. */
> #define sys_mq_notify ilp32_sys_mq_notify
>
> -
> -/* sigaltstack needs some special handling as the
> - padding for stack_t might not be non-zero. */
> -long ilp32_sys_sigaltstack(const stack_t __user *uss_ptr,
> - stack_t __user *uoss_ptr)
> -{
> - stack_t uss, uoss;
> - int ret;
> - mm_segment_t seg;
> -
> - if (uss_ptr) {
> - if (!access_ok(VERIFY_READ, uss_ptr, sizeof(*uss_ptr)))
> - return -EFAULT;
> - if (__get_user(uss.ss_sp, &uss_ptr->ss_sp) |
> - __get_user(uss.ss_flags, &uss_ptr->ss_flags) |
> - __get_user(uss.ss_size, &uss_ptr->ss_size))
> - return -EFAULT;
> - /* Zero extend the sp address and the size. */
> - uss.ss_sp = (void *)(uintptr_t)(unsigned int)(uintptr_t)uss.ss_sp;
> - uss.ss_size = (size_t)(unsigned int)uss.ss_size;
> - }
> - seg = get_fs();
> - set_fs(KERNEL_DS);
> - /* Note we need to use uoss as we have changed the segment to the
> - kernel one so passing an user one around is wrong. */
> - ret = sys_sigaltstack((stack_t __force __user *) (uss_ptr ? &uss : NULL),
> - (stack_t __force __user *) &uoss);
> - set_fs(seg);
> - if (ret >= 0 && uoss_ptr) {
> - if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_t)) ||
> - __put_user(uoss.ss_sp, &uoss_ptr->ss_sp) ||
> - __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
> - __put_user(uoss.ss_size, &uoss_ptr->ss_size))
> - ret = -EFAULT;
> - }
> - return ret;
> -}
> -
> -/* sigaltstack needs some special handling as the padding
> - for stack_t might not be non-zero. */
> -#define sys_sigaltstack ilp32_sys_sigaltstack
> -
> -
> #include <asm/syscalls.h>
>
> #undef __SYSCALL
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists