[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150506054328.GC5639@kwestfie-linux.qualcomm.com>
Date: Tue, 5 May 2015 22:43:28 -0700
From: Kenneth Westfield <kwestfie@...eaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Patrick Lai <plai@...eaurora.org>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Banajit Goswami <bgoswami@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, linux-arm-msm@...r.kernel.org
Subject: Re: [alsa-devel] [RFC PATCH 03/14] ASoC: qcom: move ipq806x specific
bits out of lpass driver.
On Tue, May 05, 2015 at 12:17:23AM -0700, Srinivas Kandagatla wrote:
> On 05/05/15 06:19, Kenneth Westfield wrote:
> >>>> >+enum lpaif_i2s_ports {
> >>>> >+ LPAIF_I2S_PORT_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_I2S_PORT_CODEC_SPK = 0,
> >>>> >+ LPAIF_I2S_PORT_CODEC_MIC = 1,
> >>>> >+ LPAIF_I2S_PORT_SEC_SPK = 2,
> >>>> >+ LPAIF_I2S_PORT_SEC_MIC = 3,
> >>>> >+ LPAIF_I2S_PORT_MI2S = 4,
> >>>> >+
> >>>> >+ LPAIF_I2S_PORT_MAX = 4,
> >>>> >+ LPAIF_I2S_PORT_NUM = 5,
> >>>> >+};
> >>>
> >>>These port mappings here...
> >>>
> >>>> >+enum lpaif_irq_ports {
> >>>> >+ LPAIF_IRQ_PORT_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_IRQ_PORT_HOST = 0,
> >>>> >+ LPAIF_IRQ_PORT_ADSP = 1,
> >>>> >+
> >>>> >+ LPAIF_IRQ_PORT_MAX = 2,
> >>>> >+ LPAIF_IRQ_PORT_NUM = 3,
> >>>> >+};
> >>>
> >>>...here...
> >>>
> >>>> >+enum lpaif_dma_channels {
> >>>> >+ LPAIF_RDMA_CHAN_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_RDMA_CHAN_MI2S = 0,
> >>>> >+ LPAIF_RDMA_CHAN_PCM0 = 1,
> >>>> >+ LPAIF_RDMA_CHAN_PCM1 = 2,
> >>>> >+
> >>>> >+ LPAIF_RDMA_CHAN_MAX = 4,
> >>>> >+ LPAIF_RDMA_CHAN_NUM = 5,
> >>>> >+};
> >>>
> >>>...and here can be SOC-specific. Should move them to the SOC-specific
> >>>files.
> >Expanding on this, the I2S port mappings for the APQ8016 should replace
> >the ones defined above with the constants you refer to in
> >dt-bindings/sound/apq8016.h:
> > MI2S_PRIMARY
> > MI2S_SECONDARY
> > etc.
> >
> >Maybe defining a corresponding ipq806x.h in the same directory, and
> >moving the above definitions there?
>
> As you pointed out i2s ports definitions can be moved to
> dt-bindings/soc/ipq806x.h but the channels can be directly defined
> in lpass-ipq806x.c as there would be no DT consumers for these
> defines
> anyway.
Moving the I2S ports to dt-bindings and the other definitions to their
SOC-specific source files works for me.
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists