linux-kernel - [PATCH v2 2/3] usb: xhci: implement device_suspend/device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed,  6 May 2015 15:40:01 +0800
From:	Lu Baolu <baolu.lu@...ux.intel.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Mathias Nyman <mathias.nyman@...el.com>,
	Alan Stern <stern@...land.harvard.edu>
Cc:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v2 2/3] usb: xhci: implement device_suspend/device_resume entries

This patch implements device_suspend/device_resume entries for xHC driver.
device_suspend will be called when a USB device is about to suspend. It
will issue a stop endpoint command for each endpoint in this device. The
Suspend(SP) bit in the command TRB will set which will give xHC a hint
about the suspend. device_resume will be called when a USB device is just
resumed. It will ring doorbells of all endpoint unconditionally. XHC may
use these suspend/resume hints to optimize its operation.

Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
---
 drivers/usb/host/xhci-hub.c |  2 +-
 drivers/usb/host/xhci.c     | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h     |  5 +++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0827d7c..a83e82e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -266,7 +266,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
  * to complete.
  * suspend will set to 1, if suspend bit need to set in command.
  */
-static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
+int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 {
 	struct xhci_virt_device *virt_dev;
 	struct xhci_command *cmd;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ec8ac16..b639627 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4680,6 +4680,30 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
 		return ret;
 	return 0;
 }
+
+void xhci_device_suspend(struct usb_hcd *hcd,
+			struct usb_device *udev, pm_message_t msg)
+{
+	struct xhci_hcd	*xhci;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci || !xhci->devs[udev->slot_id])
+		return;
+
+	xhci_stop_device(xhci, udev->slot_id, 1);
+}
+
+void xhci_device_resume(struct usb_hcd *hcd,
+			struct usb_device *udev, pm_message_t msg)
+{
+	struct xhci_hcd	*xhci;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci || !xhci->devs[udev->slot_id])
+		return;
+
+	xhci_ring_device(xhci, udev->slot_id);
+}
 #else /* CONFIG_PM */
 
 int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
@@ -4704,6 +4728,16 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
 {
 	return 0;
 }
+
+void xhci_device_suspend(struct usb_hcd *hcd,
+			struct usb_device *udev, pm_message_t msg)
+{
+}
+
+void xhci_device_resume(struct usb_hcd *hcd,
+			struct usb_device *udev, pm_message_t msg)
+{
+}
 #endif	/* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -4976,6 +5010,12 @@ static const struct hc_driver xhci_hc_driver = {
 	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
 	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
 	.find_raw_port_number =	xhci_find_raw_port_number,
+
+	/*
+	 * call back when devices suspend or resume
+	 */
+	.device_suspend =	xhci_device_suspend,
+	.device_resume =	xhci_device_resume,
 };
 
 void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *))
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8e421b8..3d1f73b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1867,10 +1867,15 @@ u32 xhci_port_state_to_neutral(u32 state);
 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 		u16 port);
 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend);
 
 /* xHCI contexts */
 struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
+void xhci_device_suspend(struct usb_hcd *hcd,
+		struct usb_device *udev, pm_message_t msg);
+void xhci_device_resume(struct usb_hcd *hcd,
+		struct usb_device *udev, pm_message_t msg);
 #endif /* __LINUX_XHCI_HCD_H */
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/