[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1430935194-7579-1-git-send-email-computersforpeace@gmail.com>
Date: Wed, 6 May 2015 10:59:44 -0700
From: Brian Norris <computersforpeace@...il.com>
To: <linux-mtd@...ts.infradead.org>
Cc: Brian Norris <computersforpeace@...il.com>,
Dmitry Torokhov <dtor@...gle.com>,
Anatol Pomazao <anatol@...gle.com>,
Ray Jui <rjui@...adcom.com>,
Corneliu Doban <cdoban@...adcom.com>,
Jonathan Richardson <jonathar@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Rafał Miłecki <zajec5@...il.com>,
bcm-kernel-feedback-list@...adcom.com,
Dan Ehrenberg <dehrenberg@...omium.org>,
Gregory Fong <gregory.0xf0@...il.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Kevin Cernekee <cernekee@...il.com>
Subject: [PATCH v3 00/10] mtd: nand: add Broadcom NAND controller support
Hi,
This is version 3 of support for the Broadcom BCM7xxx Set-Top Box NAND
controller. This controller has been used in a variety of Broadcom SoCs.
This series now adds support for a few new chips: BCM63138, and the iProc chip
family. These add an additional 6 new patches to the original 4. If the only
comments end up on the latter 6 patches, the first 4 might be worth merging
independently.
Summary changelog:
v1 -> v2:
* add NAND to DTS for BCM7445 / BCM97445SVMB
* rename DT binding file to have 'brcm,' prefix
* catch DMA mapping errors
* fixup timeout / error messages (hex, remove misleading info)
* MODULE_LICENSE("GPL v2")
* fix incorrect comments
* print why we fail, when checking for supported controller revisions
* disable prefetch when using Flash DMA (see FIXME); will re-enable once we
get a good erased-page verification scheme merged
v2 -> v3:
* rebase to v4.1-rc1
* add SoC-specific infrastructure, to help support other SoCs:
- add BCM63138 support
- add iProc/Cygnus support
* disable prefetch on v6.1
Brian Norris (8):
mtd: nand: add common DT init code
Documentation: devicetree: add binding doc for Broadcom NAND
controller
mtd: nand: add NAND driver for Broadcom STB NAND controller
ARM: bcm7445: add NAND to DTS
Documentation: devicetree: brcmstb_nand: add 'brcm,nand-soc' bindings
mtd: brcmstb_nand: add SoC-specific support
mtd: brcsmtb_nand_soc: add support for BCM63138
ARM: bcm63138: add NAND DT support
Ray Jui (2):
mtd: brcsmtb_nand_soc: add iProc support
ARM: dts: cygnus: Enable NAND support for Cygnus
.../devicetree/bindings/mtd/brcm,brcmstb-nand.txt | 147 ++
arch/arm/boot/dts/bcm-cygnus.dtsi | 20 +
arch/arm/boot/dts/bcm63138.dtsi | 17 +
arch/arm/boot/dts/bcm7445-bcm97445svmb.dts | 23 +
arch/arm/boot/dts/bcm7445.dtsi | 22 +
arch/arm/boot/dts/bcm958300k.dts | 16 +
arch/arm/boot/dts/bcm963138dvt.dts | 12 +
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/brcmnand.h | 56 +
drivers/mtd/nand/brcmstb_nand.c | 2263 ++++++++++++++++++++
drivers/mtd/nand/brcmstb_nand_soc.c | 244 +++
drivers/mtd/nand/nand_base.c | 41 +
include/linux/mtd/nand.h | 5 +
14 files changed, 2876 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/brcm,brcmstb-nand.txt
create mode 100644 drivers/mtd/nand/brcmnand.h
create mode 100644 drivers/mtd/nand/brcmstb_nand.c
create mode 100644 drivers/mtd/nand/brcmstb_nand_soc.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists