Message-Id: <1430940068-4326-2-git-send-email-mathieu.desnoyers@efficios.com>
Date:	Wed,  6 May 2015 15:21:06 -0400
From:	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
To:	Andrew Morton <akpm@...ux-foundation.org>
Cc:	linux-kernel@...r.kernel.org,
	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
	Josh Triplett <josh@...htriplett.org>,
	KOSAKI Motohiro <kosaki.motohiro@...fujitsu.com>,
	Steven Rostedt <rostedt@...dmis.org>,
	Nicholas Miell <nmiell@...cast.net>,
	Linus Torvalds <torvalds@...ux-foundation.org>,
	Ingo Molnar <mingo@...hat.com>,
	Alan Cox <gnomes@...rguk.ukuu.org.uk>,
	Lai Jiangshan <laijs@...fujitsu.com>,
	Stephen Hemminger <stephen@...workplumber.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Peter Zijlstra <peterz@...radead.org>,
	David Howells <dhowells@...hat.com>,
	Pranith Kumar <bobby.prani@...il.com>,
	Michael Kerrisk <mtk.manpages@...il.com>,
	linux-api@...r.kernel.org
Subject: [PATCH v18 for v4.1-rc2 1/3] sys_membarrier(): system-wide memory barrier (generic, x86)

Here is an implementation of a new system call, sys_membarrier(), which
executes a memory barrier on all threads running on the system. It is
implemented by calling synchronize_sched(). It can be used to distribute
the cost of user-space memory barriers asymmetrically by transforming
pairs of memory barriers into pairs consisting of sys_membarrier() and a
compiler barrier. For synchronization primitives that distinguish
between read-side and write-side (e.g. userspace RCU [1], rwlocks), the
read-side can be accelerated significantly by moving the bulk of the
memory barrier overhead to the write-side.

It is based on kernel v4.1-rc2.

To explain the benefit of this scheme, let's introduce two example threads:

Thread A (non-frequent, e.g. executing liburcu synchronize_rcu())
Thread B (frequent, e.g. executing liburcu
rcu_read_lock()/rcu_read_unlock())

In a scheme where all smp_mb() in thread A are ordering memory accesses
with respect to smp_mb() present in Thread B, we can change each
smp_mb() within Thread A into calls to sys_membarrier() and each
smp_mb() within Thread B into compiler barriers "barrier()".

Before the change, we had, for each smp_mb() pairs:

Thread A                    Thread B
previous mem accesses       previous mem accesses
smp_mb()                    smp_mb()
following mem accesses      following mem accesses

After the change, these pairs become:

Thread A                    Thread B
prev mem accesses           prev mem accesses
sys_membarrier()            barrier()
follow mem accesses         follow mem accesses

As we can see, there are two possible scenarios: either Thread B memory
accesses do not happen concurrently with Thread A accesses (1), or they
do (2).

1) Non-concurrent Thread A vs Thread B accesses:

Thread A                    Thread B
prev mem accesses
sys_membarrier()
follow mem accesses
                            prev mem accesses
                            barrier()
                            follow mem accesses

In this case, thread B accesses will be weakly ordered. This is OK,
because at that point, thread A is not particularly interested in
ordering them with respect to its own accesses.

2) Concurrent Thread A vs Thread B accesses

Thread A                    Thread B
prev mem accesses           prev mem accesses
sys_membarrier()            barrier()
follow mem accesses         follow mem accesses

In this case, thread B accesses, which are ensured to be in program
order thanks to the compiler barrier, will be "upgraded" to full
smp_mb() by synchronize_sched().

* Benchmarks

On Intel Xeon E5405 (8 cores)
(one thread is calling sys_membarrier, the other 7 threads are busy
looping)

1000 non-expedited sys_membarrier calls in 33s = 33 milliseconds/call.

* User-space user of this system call: Userspace RCU library

Both the signal-based and the sys_membarrier userspace RCU schemes
permit us to remove the memory barrier from the userspace RCU
rcu_read_lock() and rcu_read_unlock() primitives, thus significantly
accelerating them. These memory barriers are replaced by compiler
barriers on the read-side, and all matching memory barriers on the
write-side are turned into an invocation of a memory barrier on all
active threads in the process. By letting the kernel perform this
synchronization rather than dumbly sending a signal to every process
threads (as we currently do), we diminish the number of unnecessary wake
ups and only issue the memory barriers on active threads. Non-running
threads do not need to execute such barrier anyway, because these are
implied by the scheduler context switches.

Results in liburcu:

Operations in 10s, 6 readers, 2 writers:

memory barriers in reader:    1701557485 reads, 2202847 writes
signal-based scheme:          9830061167 reads,    6700 writes
sys_membarrier:               9952759104 reads,     425 writes
sys_membarrier (dyn. check):  7970328887 reads,     425 writes

The dynamic sys_membarrier availability check adds some overhead to
the read-side compared to the signal-based scheme, but besides that,
sys_membarrier slightly outperforms the signal-based scheme. However,
this non-expedited sys_membarrier implementation has a much slower grace
period than signal and memory barrier schemes.

Besides diminishing the number of wake-ups, one major advantage of the
membarrier system call over the signal-based scheme is that it does not
need to reserve a signal. This plays much more nicely with libraries,
and with processes injected into for tracing purposes, for which we
cannot expect that signals will be unused by the application.

An expedited version of this system call can be added later on to speed
up the grace period. Its implementation will likely depend on reading
the cpu_curr()->mm without holding each CPU's rq lock.

This patch adds the system call to x86 and to asm-generic.

membarrier(2) man page:
--------------- snip -------------------
MEMBARRIER(2)              Linux Programmer's Manual             MEMBARRIER(2)

NAME
       membarrier - issue memory barriers on a set of threads

SYNOPSIS
       #include <linux/membarrier.h>

       int membarrier(int cmd, int flags);

DESCRIPTION
       The cmd argument is one of the following:

       MEMBARRIER_CMD_QUERY
              Query  the  set  of  supported commands. It returns a bitmask of
              supported commands.

       MEMBARRIER_CMD_SHARED
              Execute a memory barrier on all threads running on  the  system.
              Upon  return from system call, the caller thread is ensured that
              all running threads have passed through a state where all memory
              accesses  to  user-space  addresses  match program order between
              entry to and return from the system  call  (non-running  threads
              are de facto in such a state). This covers threads from all pro‐
              cesses running on the system.  This command returns 0.

       The flags argument needs to be 0. For future extensions.

       All memory accesses performed  in  program  order  from  each  targeted
       thread is guaranteed to be ordered with respect to sys_membarrier(). If
       we use the semantic "barrier()" to represent a compiler barrier forcing
       memory  accesses  to  be performed in program order across the barrier,
       and smp_mb() to represent explicit memory barriers forcing full  memory
       ordering  across  the barrier, we have the following ordering table for
       each pair of barrier(), sys_membarrier() and smp_mb():

       The pair ordering is detailed as (O: ordered, X: not ordered):

                              barrier()   smp_mb() sys_membarrier()
              barrier()          X           X            O
              smp_mb()           X           O            O
              sys_membarrier()   O           O            O

RETURN VALUE
       On success, these system calls return zero.  On error, -1 is  returned,
       and errno is set appropriately. For a given command, with flags
       argument set to 0, this system call is guaranteed to always return the
       same value until reboot.

ERRORS
       ENOSYS System call is not implemented.

       EINVAL Invalid arguments.

Linux                             2015-04-15                     MEMBARRIER(2)
--------------- snip -------------------

[1] http://urcu.so

Changes since v17:
- Update commit message.

Changes since v16:
- Update documentation.
- Add man page to changelog.
- Build sys_membarrier on !CONFIG_SMP. It allows userspace applications
  to not care about the number of processors on the system.  Based on
  recommendations from Stephen Hemminger and Steven Rostedt.
- Check that flags argument is 0, update documentation to require it.

Changes since v15:
- Add flags argument in addition to cmd.
- Update documentation.

Changes since v14:
- Take care of Thomas Gleixner's comments.

Changes since v13:
- Move to kernel/membarrier.c.
- Remove MEMBARRIER_PRIVATE flag.
- Add MAINTAINERS file entry.

Changes since v12:
- Remove _FLAG suffix from uapi flags.
- Add Expert menuconfig option CONFIG_MEMBARRIER (default=y).
- Remove EXPEDITED mode. Only implement non-expedited for now, until
  reading the cpu_curr()->mm can be done without holding the CPU's rq
  lock.

Changes since v11:
- 5 years have passed.
- Rebase on v3.19 kernel.
- Add futex-alike PRIVATE vs SHARED semantic: private for per-process
  barriers, non-private for memory mappings shared between processes.
- Simplify user API.
- Code refactoring.

Changes since v10:
- Apply Randy's comments.
- Rebase on 2.6.34-rc4 -tip.

Changes since v9:
- Clean up #ifdef CONFIG_SMP.

Changes since v8:
- Go back to rq spin locks taken by sys_membarrier() rather than adding
  memory barriers to the scheduler. It implies a potential RoS
  (reduction of service) if sys_membarrier() is executed in a busy-loop
  by a user, but nothing more than what is already possible with other
  existing system calls, but saves memory barriers in the scheduler fast
  path.
- re-add the memory barrier comments to x86 switch_mm() as an example to
  other architectures.
- Update documentation of the memory barriers in sys_membarrier and
  switch_mm().
- Append execution scenarios to the changelog showing the purpose of
  each memory barrier.

Changes since v7:
- Move spinlock-mb and scheduler related changes to separate patches.
- Add support for sys_membarrier on x86_32.
- Only x86 32/64 system calls are reserved in this patch. It is planned
  to incrementally reserve syscall IDs on other architectures as these
  are tested.

Changes since v6:
- Remove some unlikely() not so unlikely.
- Add the proper scheduler memory barriers needed to only use the RCU
  read lock in sys_membarrier rather than take each runqueue spinlock:
- Move memory barriers from per-architecture switch_mm() to schedule()
  and finish_lock_switch(), where they clearly document that all data
  protected by the rq lock is guaranteed to have memory barriers issued
  between the scheduler update and the task execution. Replacing the
  spin lock acquire/release barriers with these memory barriers imply
  either no overhead (x86 spinlock atomic instruction already implies a
  full mb) or some hopefully small overhead caused by the upgrade of the
  spinlock acquire/release barriers to more heavyweight smp_mb().
- The "generic" version of spinlock-mb.h declares both a mapping to
  standard spinlocks and full memory barriers. Each architecture can
  specialize this header following their own need and declare
  CONFIG_HAVE_SPINLOCK_MB to use their own spinlock-mb.h.
- Note: benchmarks of scheduler overhead with specialized spinlock-mb.h
  implementations on a wide range of architecture would be welcome.

Changes since v5:
- Plan ahead for extensibility by introducing mandatory/optional masks
  to the "flags" system call parameter. Past experience with accept4(),
  signalfd4(), eventfd2(), epoll_create1(), dup3(), pipe2(), and
  inotify_init1() indicates that this is the kind of thing we want to
  plan for. Return -EINVAL if the mandatory flags received are unknown.
- Create include/linux/membarrier.h to define these flags.
- Add MEMBARRIER_QUERY optional flag.

Changes since v4:
- Add "int expedited" parameter, use synchronize_sched() in the
  non-expedited case. Thanks to Lai Jiangshan for making us consider
  seriously using synchronize_sched() to provide the low-overhead
  membarrier scheme.
- Check num_online_cpus() == 1, quickly return without doing nothing.

Changes since v3a:
- Confirm that each CPU indeed runs the current task's ->mm before
  sending an IPI. Ensures that we do not disturb RT tasks in the
  presence of lazy TLB shootdown.
- Document memory barriers needed in switch_mm().
- Surround helper functions with #ifdef CONFIG_SMP.

Changes since v2:
- simply send-to-many to the mm_cpumask. It contains the list of
  processors we have to IPI to (which use the mm), and this mask is
  updated atomically.

Changes since v1:
- Only perform the IPI in CONFIG_SMP.
- Only perform the IPI if the process has more than one thread.
- Only send IPIs to CPUs involved with threads belonging to our process.
- Adaptative IPI scheme (single vs many IPI with threshold).
- Issue smp_mb() at the beginning and end of the system call.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
Reviewed-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
CC: Josh Triplett <josh@...htriplett.org>
CC: KOSAKI Motohiro <kosaki.motohiro@...fujitsu.com>
CC: Steven Rostedt <rostedt@...dmis.org>
CC: Nicholas Miell <nmiell@...cast.net>
CC: Linus Torvalds <torvalds@...ux-foundation.org>
CC: Ingo Molnar <mingo@...hat.com>
CC: Alan Cox <gnomes@...rguk.ukuu.org.uk>
CC: Lai Jiangshan <laijs@...fujitsu.com>
CC: Stephen Hemminger <stephen@...workplumber.org>
CC: Andrew Morton <akpm@...ux-foundation.org>
CC: Thomas Gleixner <tglx@...utronix.de>
CC: Peter Zijlstra <peterz@...radead.org>
CC: David Howells <dhowells@...hat.com>
CC: Pranith Kumar <bobby.prani@...il.com>
CC: Michael Kerrisk <mtk.manpages@...il.com>
CC: linux-api@...r.kernel.org
---
 MAINTAINERS                       |    8 ++++
 arch/x86/syscalls/syscall_32.tbl  |    1 +
 arch/x86/syscalls/syscall_64.tbl  |    1 +
 include/linux/syscalls.h          |    2 +
 include/uapi/asm-generic/unistd.h |    4 ++-
 include/uapi/linux/Kbuild         |    1 +
 include/uapi/linux/membarrier.h   |   53 +++++++++++++++++++++++++++++
 init/Kconfig                      |   12 +++++++
 kernel/Makefile                   |    1 +
 kernel/membarrier.c               |   66 +++++++++++++++++++++++++++++++++++++
 kernel/sys_ni.c                   |    3 ++
 11 files changed, 151 insertions(+), 1 deletions(-)
 create mode 100644 include/uapi/linux/membarrier.h
 create mode 100644 kernel/membarrier.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 781e099..fcb63d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6370,6 +6370,14 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlx4/en_*
 
+MEMBARRIER SUPPORT
+M:	Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
+M:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
+L:	linux-kernel@...r.kernel.org
+S:	Supported
+F:	kernel/membarrier.c
+F:	include/uapi/linux/membarrier.h
+
 MEMORY MANAGEMENT
 L:	linux-mm@...ck.org
 W:	http://www.linux-mm.org
diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl
index ef8187f..e63ad61 100644
--- a/arch/x86/syscalls/syscall_32.tbl
+++ b/arch/x86/syscalls/syscall_32.tbl
@@ -365,3 +365,4 @@
 356	i386	memfd_create		sys_memfd_create
 357	i386	bpf			sys_bpf
 358	i386	execveat		sys_execveat			stub32_execveat
+359	i386	membarrier		sys_membarrier
diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
index 9ef32d5..87f3cd6 100644
--- a/arch/x86/syscalls/syscall_64.tbl
+++ b/arch/x86/syscalls/syscall_64.tbl
@@ -329,6 +329,7 @@
 320	common	kexec_file_load		sys_kexec_file_load
 321	common	bpf			sys_bpf
 322	64	execveat		stub_execveat
+323	common	membarrier		sys_membarrier
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 76d1e38..51a9054 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
 			const char __user *const __user *argv,
 			const char __user *const __user *envp, int flags);
 
+asmlinkage long sys_membarrier(int cmd, int flags);
+
 #endif
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index e016bd9..8da542a 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
 __SYSCALL(__NR_bpf, sys_bpf)
 #define __NR_execveat 281
 __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
+#define __NR_membarrier 282
+__SYSCALL(__NR_membarrier, sys_membarrier)
 
 #undef __NR_syscalls
-#define __NR_syscalls 282
+#define __NR_syscalls 283
 
 /*
  * All syscalls below here should go away really,
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 1a0006a..7bcc827 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -250,6 +250,7 @@ header-y += mdio.h
 header-y += media.h
 header-y += media-bus-format.h
 header-y += mei.h
+header-y += membarrier.h
 header-y += memfd.h
 header-y += mempolicy.h
 header-y += meye.h
diff --git a/include/uapi/linux/membarrier.h b/include/uapi/linux/membarrier.h
new file mode 100644
index 0000000..e0b108b
--- /dev/null
+++ b/include/uapi/linux/membarrier.h
@@ -0,0 +1,53 @@
+#ifndef _UAPI_LINUX_MEMBARRIER_H
+#define _UAPI_LINUX_MEMBARRIER_H
+
+/*
+ * linux/membarrier.h
+ *
+ * membarrier system call API
+ *
+ * Copyright (c) 2010, 2015 Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/**
+ * enum membarrier_cmd - membarrier system call command
+ * @MEMBARRIER_CMD_QUERY:   Query the set of supported commands. It returns
+ *                          a bitmask of valid commands.
+ * @MEMBARRIER_CMD_SHARED:  Execute a memory barrier on all running threads.
+ *                          Upon return from system call, the caller thread
+ *                          is ensured that all running threads have passed
+ *                          through a state where all memory accesses to
+ *                          user-space addresses match program order between
+ *                          entry to and return from the system call
+ *                          (non-running threads are de facto in such a
+ *                          state). This covers threads from all processes
+ *                          running on the system. This command returns 0.
+ *
+ * Command to be passed to the membarrier system call. The commands need to
+ * be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to
+ * the value 0.
+ */
+enum membarrier_cmd {
+	MEMBARRIER_CMD_QUERY = 0,
+	MEMBARRIER_CMD_SHARED = (1 << 0),
+};
+
+#endif /* _UAPI_LINUX_MEMBARRIER_H */
diff --git a/init/Kconfig b/init/Kconfig
index dc24dec..307e406 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1583,6 +1583,18 @@ config PCI_QUIRKS
 	  bugs/quirks. Disable this only if your target machine is
 	  unaffected by PCI quirks.
 
+config MEMBARRIER
+	bool "Enable membarrier() system call" if EXPERT
+	default y
+	help
+	  Enable the membarrier() system call that allows issuing memory
+	  barriers across all running threads, which can be used to distribute
+	  the cost of user-space memory barriers asymmetrically by transforming
+	  pairs of memory barriers into pairs consisting of membarrier() and a
+	  compiler barrier.
+
+	  If unsure, say Y.
+
 config EMBEDDED
 	bool "Embedded system"
 	option allnoconfig_y
diff --git a/kernel/Makefile b/kernel/Makefile
index 60c302c..05191fd 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
 obj-$(CONFIG_JUMP_LABEL) += jump_label.o
 obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
 obj-$(CONFIG_TORTURE_TEST) += torture.o
+obj-$(CONFIG_MEMBARRIER) += membarrier.o
 
 $(obj)/configs.o: $(obj)/config_data.h
 
diff --git a/kernel/membarrier.c b/kernel/membarrier.c
new file mode 100644
index 0000000..a20b279
--- /dev/null
+++ b/kernel/membarrier.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2010, 2015 Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
+ *
+ * membarrier system call
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/syscalls.h>
+#include <linux/membarrier.h>
+
+/*
+ * Bitmask made from a "or" of all commands within enum membarrier_cmd,
+ * except MEMBARRIER_CMD_QUERY.
+ */
+#define MEMBARRIER_CMD_BITMASK	(MEMBARRIER_CMD_SHARED)
+
+/**
+ * sys_membarrier - issue memory barriers on a set of threads
+ * @cmd:   Takes command values defined in enum membarrier_cmd.
+ * @flags: Currently needs to be 0. For future extensions.
+ *
+ * If this system call is not implemented, -ENOSYS is returned. If the
+ * command specified does not exist, or if the command argument is invalid,
+ * this system call returns -EINVAL. For a given command, with flags argument
+ * set to 0, this system call is guaranteed to always return the same value
+ * until reboot.
+ *
+ * All memory accesses performed in program order from each targeted thread
+ * is guaranteed to be ordered with respect to sys_membarrier(). If we use
+ * the semantic "barrier()" to represent a compiler barrier forcing memory
+ * accesses to be performed in program order across the barrier, and
+ * smp_mb() to represent explicit memory barriers forcing full memory
+ * ordering across the barrier, we have the following ordering table for
+ * each pair of barrier(), sys_membarrier() and smp_mb():
+ *
+ * The pair ordering is detailed as (O: ordered, X: not ordered):
+ *
+ *                        barrier()   smp_mb() sys_membarrier()
+ *        barrier()          X           X            O
+ *        smp_mb()           X           O            O
+ *        sys_membarrier()   O           O            O
+ */
+SYSCALL_DEFINE2(membarrier, int, cmd, int, flags)
+{
+	if (flags)
+		return -EINVAL;
+	switch (cmd) {
+	case MEMBARRIER_CMD_QUERY:
+		return MEMBARRIER_CMD_BITMASK;
+	case MEMBARRIER_CMD_SHARED:
+		if (num_online_cpus() > 1)
+			synchronize_sched();
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 7995ef5..eb4fde0 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -243,3 +243,6 @@ cond_syscall(sys_bpf);
 
 /* execveat */
 cond_syscall(sys_execveat);
+
+/* membarrier */
+cond_syscall(sys_membarrier);
-- 
1.7.7.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists