linux-kernel - Re: [PATCH] serial: imx: Revert "initialized DMA w/o HW flow enabled"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 7 May 2015 20:17:19 -0300
From:	Fabio Estevam <festevam@...il.com>
To:	Sebastian Andrzej Siewior <sebastian@...akpoint.cc>
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
	jiwang <jiada_wang@...tor.com>, Jiri Slaby <jslaby@...e.cz>,
	"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	anton_bondarenko@...tor.com, Dirk Behme <dirk.behme@...bosch.com>,
	Nicolae Rosia <nicolae.rosia@...il.com>,
	Fabio Estevam <fabio.estevam@...escale.com>
Subject: Re: [PATCH] serial: imx: Revert "initialized DMA w/o HW flow enabled"

On Thu, May 7, 2015 at 5:24 PM, Sebastian Andrzej Siewior
<sebastian@...akpoint.cc> wrote:
> From: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
>
> This basically reverts commit 068500e08dc8 ("serial: imx: initialized
> DMA w/o HW flow enabled") simply because it does not work as expected
> without additional magic which I am not aware of. The DMA mode is only
> used for non-console UARTs so the "standard" boot test won't notice this.
>
> I tested it on various IMX6 (S and Q) boards and the default SDMA firmware
> that is included in ROM does work properly. The SDMA interrupt counter does

Here you say that the ROM SDMA works properly.

> not stop increment (which means the SDMA does not stop working or the ACK
> is working) and I see a lot of 0x00 (sometimes other bytes) which are added
> to the tty buffer which are not part of the data transfer.
> Jiada claimed that there is a firmware which makes it work but failed to
> provide me a link to the firmware. All he said was that it can not be
> shipped as part of the kernel due to license issues. I've found a firmware
> blob in the FSL-tree but this firmware causes only TTY-overflows an *no*
> data is transmitted.
>
> Currently I see no other way out.
>
> Fixes: 068500e08dc8 ("serial: imx: initialized DMA w/o HW flow enabled")
> Cc: Fabio Estevam <fabio.estevam@...escale.com>
> Cc: Jiada Wang <jiada_wang@...tor.com>
> Cc: nicolae.rosia@...il.com
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
> ---
>  drivers/tty/serial/imx.c | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 8aff0b4d8ddf..e686c75fa4dc 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1113,11 +1113,6 @@ static int imx_startup(struct uart_port *port)
>
>         writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
>
> -       /* Can we enable the DMA support? */
> -       if (is_imx6q_uart(sport) && !uart_console(port) &&
> -           !sport->dma_is_inited)
> -               imx_uart_dma_init(sport);
> -
>         spin_lock_irqsave(&sport->port.lock, flags);
>         /* Reset fifo's and state machines */
>         i = 100;
> @@ -1308,6 +1303,17 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
>                         } else {
>                                 ucr2 |= UCR2_CTSC;
>                         }
> +
> +                       /*
> +                        * Can we enable the DMA support? Be aware that
> +                        * at least IMX6 needs to load external SDMA firmware in
> +                        * order work properly. The in-ROM firmware is not
> +                        * wokring properly.

,but here you say the contrary.

With this fixed (and please also Cc stable):

Reviewed-by: Fabio Estevam <fabio.estevam@...escale.com>
Tested-by: Fabio Estevam <fabio.estevam@...escale.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/