[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1430979572-14768-10-git-send-email-heikki.krogerus@linux.intel.com>
Date: Thu, 7 May 2015 09:19:29 +0300
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Felipe Balbi <balbi@...com>
Cc: David Cohen <david.a.cohen@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Baolu Lu <baolu.lu@...ux.intel.com>,
Paul Bolle <pebolle@...cali.nl>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [̈́PATCHv4 09/12] usb: dwc3: pci: add quirk for Baytrails
On some BYT platforms the USB2 PHY needs to be put into
operational mode by the controller driver with GPIOs
controlling the PHYs reset and cs signals.
Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
---
drivers/usb/dwc3/dwc3-pci.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index b773fb5..0235f46 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -21,6 +21,8 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
#include "platform_data.h"
@@ -31,6 +33,15 @@
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
+ { "reset-gpios", &reset_gpios, 1 },
+ { "cs-gpios", &cs_gpios, 1 },
+ { },
+};
+
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
@@ -65,6 +76,30 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
sizeof(pdata));
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+ struct gpio_desc *gpio;
+
+ acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_dwc3_byt_gpios);
+
+ /* These GPIOs will turn on the USB2 PHY */
+ gpio = gpiod_get(&pdev->dev, "cs");
+ if (!IS_ERR(gpio)) {
+ gpiod_direction_output(gpio, 0);
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+ }
+
+ gpio = gpiod_get(&pdev->dev, "reset");
+ if (!IS_ERR(gpio)) {
+ gpiod_direction_output(gpio, 0);
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+ msleep(10);
+ }
+ }
+
return 0;
}
@@ -128,6 +163,7 @@ err:
static void dwc3_pci_remove(struct pci_dev *pci)
{
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
platform_device_unregister(pci_get_drvdata(pci));
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists