[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1431166241-15775-8-git-send-email-javier.martinez@collabora.co.uk>
Date: Sat, 9 May 2015 12:10:38 +0200
From: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To: Lee Jones <lee.jones@...aro.org>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Olof Johansson <olof@...om.net>,
Doug Anderson <dianders@...omium.org>,
Bill Richardson <wfrichar@...omium.org>,
Simon Glass <sjg@...gle.com>,
Gwendal Grignou <gwendal@...gle.com>,
Stephen Barber <smbarber@...omium.org>,
Filipe Brandenburger <filbranden@...gle.com>,
Todd Broch <tbroch@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Heiko Stuebner <heiko@...ech.de>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Subject: [PATCH v2 07/10] mfd: cros_ec: add bus-specific proto v3 code
From: Stephen Barber <smbarber@...omium.org>
Add proto v3 support to the SPI, I2C, and LPC.
Signed-off-by: Stephen Barber <smbarber@...omium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Tested-by: Heiko Stuebner <heiko@...ech.de>
Reviewed-by: Gwendal Grignou <gwendal@...omium.org>
Tested-by: Gwendal Grignou <gwendal@...omium.org>
---
Changes since v1:
- Added Gwendal Grignou Reviewed-by and Tested-by tags
---
drivers/mfd/cros_ec_i2c.c | 166 ++++++++++++++-
drivers/mfd/cros_ec_spi.c | 382 +++++++++++++++++++++++++++++-----
drivers/platform/chrome/cros_ec_lpc.c | 73 ++++++-
include/linux/mfd/cros_ec.h | 6 +
4 files changed, 569 insertions(+), 58 deletions(-)
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index b400bfa2772a..22e8a4ae1711 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
+#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
@@ -22,6 +23,32 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+/**
+ * Request format for protocol v3
+ * byte 0 0xda (EC_COMMAND_PROTOCOL_3)
+ * byte 1-8 struct ec_host_request
+ * byte 10- response data
+ */
+struct ec_host_request_i2c {
+ /* Always 0xda to backward compatible with v2 struct */
+ uint8_t command_protocol;
+ struct ec_host_request ec_request;
+} __packed;
+
+
+/*
+ * Response format for protocol v3
+ * byte 0 result code
+ * byte 1 packet_length
+ * byte 2-9 struct ec_host_response
+ * byte 10- response data
+ */
+struct ec_host_response_i2c {
+ uint8_t result;
+ uint8_t packet_length;
+ struct ec_host_response ec_response;
+} __packed;
+
static inline struct cros_ec_device *to_ec_dev(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -29,6 +56,134 @@ static inline struct cros_ec_device *to_ec_dev(struct device *dev)
return i2c_get_clientdata(client);
}
+static int cros_ec_pkt_xfer_i2c(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ struct i2c_client *client = ec_dev->priv;
+ int ret = -ENOMEM;
+ int i;
+ int packet_len;
+ u8 *out_buf = NULL;
+ u8 *in_buf = NULL;
+ u8 sum;
+ struct i2c_msg i2c_msg[2];
+ struct ec_host_response *ec_response;
+ struct ec_host_request_i2c *ec_request_i2c;
+ struct ec_host_response_i2c *ec_response_i2c;
+ int request_header_size = sizeof(struct ec_host_request_i2c);
+ int response_header_size = sizeof(struct ec_host_response_i2c);
+
+ i2c_msg[0].addr = client->addr;
+ i2c_msg[0].flags = 0;
+ i2c_msg[1].addr = client->addr;
+ i2c_msg[1].flags = I2C_M_RD;
+
+ packet_len = msg->insize + response_header_size;
+ BUG_ON(packet_len > ec_dev->din_size);
+ in_buf = ec_dev->din;
+ i2c_msg[1].len = packet_len;
+ i2c_msg[1].buf = (char *) in_buf;
+
+ packet_len = msg->outsize + request_header_size;
+ BUG_ON(packet_len > ec_dev->dout_size);
+ out_buf = ec_dev->dout;
+ i2c_msg[0].len = packet_len;
+ i2c_msg[0].buf = (char *) out_buf;
+
+ /* create request data */
+ ec_request_i2c = (struct ec_host_request_i2c *) out_buf;
+ ec_request_i2c->command_protocol = EC_COMMAND_PROTOCOL_3;
+
+ ec_dev->dout++;
+ ret = cros_ec_prepare_tx(ec_dev, msg);
+ ec_dev->dout--;
+
+ /* send command to EC and read answer */
+ ret = i2c_transfer(client->adapter, i2c_msg, 2);
+ if (ret < 0) {
+ dev_dbg(ec_dev->dev, "i2c transfer failed: %d\n", ret);
+ goto done;
+ } else if (ret != 2) {
+ dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
+ ret = -EIO;
+ goto done;
+ }
+
+ ec_response_i2c = (struct ec_host_response_i2c *) in_buf;
+ msg->result = ec_response_i2c->result;
+ ec_response = &ec_response_i2c->ec_response;
+
+ switch (msg->result) {
+ case EC_RES_SUCCESS:
+ break;
+ case EC_RES_IN_PROGRESS:
+ ret = -EAGAIN;
+ dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
+ msg->command);
+ goto done;
+
+ default:
+ dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
+ msg->command, msg->result);
+ /*
+ * When we send v3 request to v2 ec, ec won't recognize the
+ * 0xda (EC_COMMAND_PROTOCOL_3) and will return with status
+ * EC_RES_INVALID_COMMAND with zero data length.
+ *
+ * In case of invalid command for v3 protocol the data length
+ * will be at least sizeof(struct ec_host_response)
+ */
+ if (ec_response_i2c->result == EC_RES_INVALID_COMMAND &&
+ ec_response_i2c->packet_length == 0) {
+ ret = -EPROTONOSUPPORT;
+ goto done;
+ }
+ }
+
+ if (ec_response_i2c->packet_length < sizeof(struct ec_host_response)) {
+ dev_err(ec_dev->dev,
+ "response of %u bytes too short; not a full header\n",
+ ec_response_i2c->packet_length);
+ ret = -EBADMSG;
+ goto done;
+ }
+
+ if (msg->insize < ec_response->data_len) {
+ dev_err(ec_dev->dev,
+ "response data size is too large: expected %u, got %u\n",
+ msg->insize,
+ ec_response->data_len);
+ ret = -EMSGSIZE;
+ goto done;
+ }
+
+ /* copy response packet payload and compute checksum */
+ sum = 0;
+ for (i = 0; i < sizeof(struct ec_host_response); i++)
+ sum += ((u8 *)ec_response)[i];
+
+ memcpy(msg->data,
+ in_buf + response_header_size,
+ ec_response->data_len);
+ for (i = 0; i < ec_response->data_len; i++)
+ sum += msg->data[i];
+
+ /* All bytes should sum to zero */
+ if (sum) {
+ dev_err(ec_dev->dev, "bad packet checksum\n");
+ ret = -EBADMSG;
+ goto done;
+ }
+
+ ret = ec_response->data_len;
+
+done:
+ if (msg->command == EC_CMD_REBOOT_EC)
+ msleep(EC_REBOOT_DELAY_MS);
+
+ return ret;
+}
+
static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -121,9 +276,12 @@ static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
}
ret = len;
- done:
+done:
kfree(in_buf);
kfree(out_buf);
+ if (msg->command == EC_CMD_REBOOT_EC)
+ msleep(EC_REBOOT_DELAY_MS);
+
return ret;
}
@@ -143,12 +301,12 @@ static int cros_ec_i2c_probe(struct i2c_client *client,
ec_dev->priv = client;
ec_dev->irq = client->irq;
ec_dev->cmd_xfer = cros_ec_cmd_xfer_i2c;
- ec_dev->pkt_xfer = NULL;
+ ec_dev->pkt_xfer = cros_ec_pkt_xfer_i2c;
ec_dev->ec_name = client->name;
ec_dev->phys_name = client->adapter->name;
- ec_dev->din_size = sizeof(struct ec_host_response) +
+ ec_dev->din_size = sizeof(struct ec_host_response_i2c) +
sizeof(struct ec_response_get_protocol_info);
- ec_dev->dout_size = sizeof(struct ec_host_request);
+ ec_dev->dout_size = sizeof(struct ec_host_request_i2c);
err = cros_ec_register(ec_dev);
if (err) {
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 04da2f288ef8..4e6f2f6b1095 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -65,12 +65,6 @@
*/
#define EC_SPI_RECOVERY_TIME_NS (200 * 1000)
-/*
- * The EC is unresponsive for a time after a reboot command. Add a
- * simple delay to make sure that the bus stays locked.
- */
-#define EC_REBOOT_DELAY_MS 50
-
/**
* struct cros_ec_spi - information about a SPI-connected EC
*
@@ -87,7 +81,7 @@ struct cros_ec_spi {
};
static void debug_packet(struct device *dev, const char *name, u8 *ptr,
- int len)
+ int len)
{
#ifdef DEBUG
int i;
@@ -100,6 +94,172 @@ static void debug_packet(struct device *dev, const char *name, u8 *ptr,
#endif
}
+static int terminate_request(struct cros_ec_device *ec_dev)
+{
+ struct cros_ec_spi *ec_spi = ec_dev->priv;
+ struct spi_message msg;
+ struct spi_transfer trans;
+ int ret;
+
+ /*
+ * Turn off CS, possibly adding a delay to ensure the rising edge
+ * doesn't come too soon after the end of the data.
+ */
+ spi_message_init(&msg);
+ memset(&trans, 0, sizeof(trans));
+ trans.delay_usecs = ec_spi->end_of_msg_delay;
+ spi_message_add_tail(&trans, &msg);
+
+ ret = spi_sync(ec_spi->spi, &msg);
+
+ /* Reset end-of-response timer */
+ ec_spi->last_transfer_ns = ktime_get_ns();
+ if (ret < 0) {
+ dev_err(ec_dev->dev,
+ "cs-deassert spi transfer failed: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+
+/**
+ * receive_n_bytes - receive n bytes from the EC.
+ *
+ * Assumes buf is a pointer into the ec_dev->din buffer
+ */
+static int receive_n_bytes(struct cros_ec_device *ec_dev, u8 *buf, int n)
+{
+ struct cros_ec_spi *ec_spi = ec_dev->priv;
+ struct spi_transfer trans;
+ struct spi_message msg;
+ int ret;
+
+ BUG_ON(buf - ec_dev->din + n > ec_dev->din_size);
+
+ memset(&trans, 0, sizeof(trans));
+ trans.cs_change = 1;
+ trans.rx_buf = buf;
+ trans.len = n;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&trans, &msg);
+ ret = spi_sync(ec_spi->spi, &msg);
+ if (ret < 0)
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * cros_ec_spi_receive_packet - Receive a packet from the EC.
+ *
+ * This function has two phases: reading the preamble bytes (since if we read
+ * data from the EC before it is ready to send, we just get preamble) and
+ * reading the actual message.
+ *
+ * The received data is placed into ec_dev->din.
+ *
+ * @ec_dev: ChromeOS EC device
+ * @need_len: Number of message bytes we need to read
+ */
+static int cros_ec_spi_receive_packet(struct cros_ec_device *ec_dev,
+ int need_len)
+{
+ struct ec_host_response *response;
+ u8 *ptr, *end;
+ int ret;
+ unsigned long deadline;
+ int todo;
+
+ BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+
+ /* Receive data until we see the header byte */
+ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
+ while (true) {
+ unsigned long start_jiffies = jiffies;
+
+ ret = receive_n_bytes(ec_dev,
+ ec_dev->din,
+ EC_MSG_PREAMBLE_COUNT);
+ if (ret < 0)
+ return ret;
+
+ ptr = ec_dev->din;
+ for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
+ if (*ptr == EC_SPI_FRAME_START) {
+ dev_dbg(ec_dev->dev, "msg found at %zd\n",
+ ptr - ec_dev->din);
+ break;
+ }
+ }
+ if (ptr != end)
+ break;
+
+ /*
+ * Use the time at the start of the loop as a timeout. This
+ * gives us one last shot at getting the transfer and is useful
+ * in case we got context switched out for a while.
+ */
+ if (time_after(start_jiffies, deadline)) {
+ dev_warn(ec_dev->dev, "EC failed to respond in time\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ /*
+ * ptr now points to the header byte. Copy any valid data to the
+ * start of our buffer
+ */
+ todo = end - ++ptr;
+ BUG_ON(todo < 0 || todo > ec_dev->din_size);
+ todo = min(todo, need_len);
+ memmove(ec_dev->din, ptr, todo);
+ ptr = ec_dev->din + todo;
+ dev_dbg(ec_dev->dev, "need %d, got %d bytes from preamble\n",
+ need_len, todo);
+ need_len -= todo;
+
+ /* If the entire response struct wasn't read, get the rest of it. */
+ if (todo < sizeof(*response)) {
+ ret = receive_n_bytes(ec_dev, ptr, sizeof(*response) - todo);
+ if (ret < 0)
+ return -EBADMSG;
+ ptr += (sizeof(*response) - todo);
+ todo = sizeof(*response);
+ }
+
+ response = (struct ec_host_response *)ec_dev->din;
+
+ /* Abort if data_len is too large. */
+ if (response->data_len > ec_dev->din_size)
+ return -EMSGSIZE;
+
+ /* Receive data until we have it all */
+ while (need_len > 0) {
+ /*
+ * We can't support transfers larger than the SPI FIFO size
+ * unless we have DMA. We don't have DMA on the ISP SPI ports
+ * for Exynos. We need a way of asking SPI driver for
+ * maximum-supported transfer size.
+ */
+ todo = min(need_len, 256);
+ dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n",
+ todo, need_len, ptr - ec_dev->din);
+
+ ret = receive_n_bytes(ec_dev, ptr, todo);
+ if (ret < 0)
+ return ret;
+
+ ptr += todo;
+ need_len -= todo;
+ }
+
+ dev_dbg(ec_dev->dev, "loop done, ptr=%zd\n", ptr - ec_dev->din);
+
+ return 0;
+}
+
/**
* cros_ec_spi_receive_response - Receive a response from the EC.
*
@@ -115,34 +275,27 @@ static void debug_packet(struct device *dev, const char *name, u8 *ptr,
static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
int need_len)
{
- struct cros_ec_spi *ec_spi = ec_dev->priv;
- struct spi_transfer trans;
- struct spi_message msg;
u8 *ptr, *end;
int ret;
unsigned long deadline;
int todo;
+ BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+
/* Receive data until we see the header byte */
deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
while (true) {
unsigned long start_jiffies = jiffies;
- memset(&trans, 0, sizeof(trans));
- trans.cs_change = 1;
- trans.rx_buf = ptr = ec_dev->din;
- trans.len = EC_MSG_PREAMBLE_COUNT;
-
- spi_message_init(&msg);
- spi_message_add_tail(&trans, &msg);
- ret = spi_sync(ec_spi->spi, &msg);
- if (ret < 0) {
- dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ ret = receive_n_bytes(ec_dev,
+ ec_dev->din,
+ EC_MSG_PREAMBLE_COUNT);
+ if (ret < 0)
return ret;
- }
+ ptr = ec_dev->din;
for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
- if (*ptr == EC_MSG_HEADER) {
+ if (*ptr == EC_SPI_FRAME_START) {
dev_dbg(ec_dev->dev, "msg found at %zd\n",
ptr - ec_dev->din);
break;
@@ -187,21 +340,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n",
todo, need_len, ptr - ec_dev->din);
- memset(&trans, 0, sizeof(trans));
- trans.cs_change = 1;
- trans.rx_buf = ptr;
- trans.len = todo;
- spi_message_init(&msg);
- spi_message_add_tail(&trans, &msg);
-
- /* send command to EC and read answer */
- BUG_ON((u8 *)trans.rx_buf - ec_dev->din + todo >
- ec_dev->din_size);
- ret = spi_sync(ec_spi->spi, &msg);
- if (ret < 0) {
- dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ ret = receive_n_bytes(ec_dev, ptr, todo);
+ if (ret < 0)
return ret;
- }
debug_packet(ec_dev->dev, "interim", ptr, todo);
ptr += todo;
@@ -214,6 +355,128 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
}
/**
+ * cros_ec_pkt_xfer_spi - Transfer a packet over SPI and receive the reply
+ *
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ */
+static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *ec_msg)
+{
+ struct ec_host_request *request;
+ struct ec_host_response *response;
+ struct cros_ec_spi *ec_spi = ec_dev->priv;
+ struct spi_transfer trans;
+ struct spi_message msg;
+ int i, len;
+ u8 *ptr;
+ u8 *rx_buf;
+ u8 sum;
+ int ret = 0, final_ret;
+
+ len = cros_ec_prepare_tx(ec_dev, ec_msg);
+ request = (struct ec_host_request *)ec_dev->dout;
+ dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
+
+ /* If it's too soon to do another transaction, wait */
+ if (ec_spi->last_transfer_ns) {
+ unsigned long delay; /* The delay completed so far */
+
+ delay = ktime_get_ns() - ec_spi->last_transfer_ns;
+ if (delay < EC_SPI_RECOVERY_TIME_NS)
+ ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
+ }
+
+ rx_buf = kzalloc(len, GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ /* Transmit phase - send our message */
+ memset(&trans, 0, sizeof(trans));
+ trans.tx_buf = ec_dev->dout;
+ trans.rx_buf = rx_buf;
+ trans.len = len;
+ trans.cs_change = 1;
+ spi_message_init(&msg);
+ spi_message_add_tail(&trans, &msg);
+ ret = spi_sync(ec_spi->spi, &msg);
+
+ /* Get the response */
+ if (!ret) {
+ /* Verify that EC can process command */
+ for (i = 0; i < len; i++) {
+ switch (rx_buf[i]) {
+ case EC_SPI_PAST_END:
+ case EC_SPI_RX_BAD_DATA:
+ case EC_SPI_NOT_READY:
+ ret = -EAGAIN;
+ ec_msg->result = EC_RES_IN_PROGRESS;
+ default:
+ break;
+ }
+ if (ret)
+ break;
+ }
+ if (!ret)
+ ret = cros_ec_spi_receive_packet(ec_dev,
+ ec_msg->insize + sizeof(*response));
+ } else {
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ }
+
+ final_ret = terminate_request(ec_dev);
+ if (!ret)
+ ret = final_ret;
+ if (ret < 0)
+ goto exit;
+
+ ptr = ec_dev->din;
+
+ /* check response error code */
+ response = (struct ec_host_response *)ptr;
+ ec_msg->result = response->result;
+
+ ret = cros_ec_check_result(ec_dev, ec_msg);
+ if (ret)
+ goto exit;
+
+ len = response->data_len;
+ sum = 0;
+ if (len > ec_msg->insize) {
+ dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
+ len, ec_msg->insize);
+ ret = -EMSGSIZE;
+ goto exit;
+ }
+
+ for (i = 0; i < sizeof(*response); i++)
+ sum += ptr[i];
+
+ /* copy response packet payload and compute checksum */
+ memcpy(ec_msg->data, ptr + sizeof(*response), len);
+ for (i = 0; i < len; i++)
+ sum += ec_msg->data[i];
+
+ if (sum) {
+ dev_err(ec_dev->dev,
+ "bad packet checksum, calculated %x\n",
+ sum);
+ ret = -EBADMSG;
+ goto exit;
+ }
+
+ ret = len;
+exit:
+ kfree(rx_buf);
+ if (ec_msg->command == EC_CMD_REBOOT_EC)
+ msleep(EC_REBOOT_DELAY_MS);
+
+ return ret;
+}
+
+/**
* cros_ec_cmd_xfer_spi - Transfer a message over SPI and receive the reply
*
* @ec_dev: ChromeOS EC device
@@ -227,6 +490,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
struct spi_message msg;
int i, len;
u8 *ptr;
+ u8 *rx_buf;
int sum;
int ret = 0, final_ret;
@@ -242,10 +506,17 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
}
+ rx_buf = kzalloc(len, GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
/* Transmit phase - send our message */
debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
memset(&trans, 0, sizeof(trans));
trans.tx_buf = ec_dev->dout;
+ trans.rx_buf = rx_buf;
trans.len = len;
trans.cs_change = 1;
spi_message_init(&msg);
@@ -254,29 +525,32 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
/* Get the response */
if (!ret) {
- ret = cros_ec_spi_receive_response(ec_dev,
- ec_msg->insize + EC_MSG_TX_PROTO_BYTES);
+ /* Verify that EC can process command */
+ for (i = 0; i < len; i++) {
+ switch (rx_buf[i]) {
+ case EC_SPI_PAST_END:
+ case EC_SPI_RX_BAD_DATA:
+ case EC_SPI_NOT_READY:
+ ret = -EAGAIN;
+ ec_msg->result = EC_RES_IN_PROGRESS;
+ default:
+ break;
+ }
+ if (ret)
+ break;
+ }
+ if (!ret)
+ ret = cros_ec_spi_receive_response(ec_dev,
+ ec_msg->insize + EC_MSG_TX_PROTO_BYTES);
} else {
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
}
- /*
- * Turn off CS, possibly adding a delay to ensure the rising edge
- * doesn't come too soon after the end of the data.
- */
- spi_message_init(&msg);
- memset(&trans, 0, sizeof(trans));
- trans.delay_usecs = ec_spi->end_of_msg_delay;
- spi_message_add_tail(&trans, &msg);
-
- final_ret = spi_sync(ec_spi->spi, &msg);
- ec_spi->last_transfer_ns = ktime_get_ns();
+ final_ret = terminate_request(ec_dev);
if (!ret)
ret = final_ret;
- if (ret < 0) {
- dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ if (ret < 0)
goto exit;
- }
ptr = ec_dev->din;
@@ -315,6 +589,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
ret = len;
exit:
+ kfree(rx_buf);
if (ec_msg->command == EC_CMD_REBOOT_EC)
msleep(EC_REBOOT_DELAY_MS);
@@ -361,7 +636,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
ec_dev->priv = ec_spi;
ec_dev->irq = spi->irq;
ec_dev->cmd_xfer = cros_ec_cmd_xfer_spi;
- ec_dev->pkt_xfer = NULL;
+ ec_dev->pkt_xfer = cros_ec_pkt_xfer_spi;
ec_dev->ec_name = ec_spi->spi->modalias;
ec_dev->phys_name = dev_name(&ec_spi->spi->dev);
ec_dev->din_size = EC_MSG_PREAMBLE_COUNT +
@@ -369,6 +644,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
sizeof(struct ec_response_get_protocol_info);
ec_dev->dout_size = sizeof(struct ec_host_request);
+
err = cros_ec_register(ec_dev);
if (err) {
dev_err(dev, "cannot register EC\n");
diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
index d56dfb9dd463..e98b0345288a 100644
--- a/drivers/platform/chrome/cros_ec_lpc.c
+++ b/drivers/platform/chrome/cros_ec_lpc.c
@@ -46,6 +46,77 @@ static int ec_response_timed_out(void)
return 1;
}
+static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
+ struct cros_ec_command *msg)
+{
+ struct ec_host_request *request;
+ struct ec_host_response response;
+ u8 sum = 0;
+ int i;
+ int ret = 0;
+ u8 *dout;
+
+ ret = cros_ec_prepare_tx(ec, msg);
+
+ /* Write buffer */
+ for (i = 0; i < ret; i++)
+ outb(ec->dout[i], EC_LPC_ADDR_HOST_PACKET + i);
+
+ request = (struct ec_host_request *)ec->dout;
+
+ /* Here we go */
+ outb(EC_COMMAND_PROTOCOL_3, EC_LPC_ADDR_HOST_CMD);
+
+ if (ec_response_timed_out()) {
+ dev_warn(ec->dev, "EC responsed timed out\n");
+ ret = -EIO;
+ goto done;
+ }
+
+ /* Check result */
+ msg->result = inb(EC_LPC_ADDR_HOST_DATA);
+ ret = cros_ec_check_result(ec, msg);
+ if (ret)
+ goto done;
+
+ /* Read back response */
+ dout = (u8 *)&response;
+ for (i = 0; i < sizeof(response); i++) {
+ dout[i] = inb(EC_LPC_ADDR_HOST_PACKET + i);
+ sum += dout[i];
+ }
+
+ msg->result = response.result;
+
+ if (response.data_len > msg->insize) {
+ dev_err(ec->dev,
+ "packet too long (%d bytes, expected %d)",
+ response.data_len, msg->insize);
+ ret = -EMSGSIZE;
+ goto done;
+ }
+
+ /* Read response and process checksum */
+ for (i = 0; i < response.data_len; i++) {
+ msg->data[i] =
+ inb(EC_LPC_ADDR_HOST_PACKET + sizeof(response) + i);
+ sum += msg->data[i];
+ }
+
+ if (sum) {
+ dev_err(ec->dev,
+ "bad packet checksum %02x\n",
+ response.checksum);
+ ret = -EBADMSG;
+ goto done;
+ }
+
+ /* Return actual amount of data received */
+ ret = response.data_len;
+done:
+ return ret;
+}
+
static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
struct cros_ec_command *msg)
{
@@ -205,7 +276,7 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
ec_dev->ec_name = pdev->name;
ec_dev->phys_name = dev_name(dev);
ec_dev->cmd_xfer = cros_ec_cmd_xfer_lpc;
- ec_dev->pkt_xfer = NULL;
+ ec_dev->pkt_xfer = cros_ec_pkt_xfer_lpc;
ec_dev->cmd_readmem = cros_ec_lpc_readmem;
ec_dev->din_size = sizeof(struct ec_host_response) +
sizeof(struct ec_response_get_protocol_info);
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index a2e87e81c956..15dc8317a767 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -22,6 +22,12 @@
#include <linux/mutex.h>
/*
+ * The EC is unresponsive for a time after a reboot command. Add a
+ * simple delay to make sure that the bus stays locked.
+ */
+#define EC_REBOOT_DELAY_MS 50
+
+/*
* Max bus-specific overhead incurred by request/responses.
* I2C requires 1 additional byte for requests.
* I2C requires 2 additional bytes for responses.
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists