[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <554FF488.5090805@ti.com>
Date: Sun, 10 May 2015 19:15:04 -0500
From: Nishanth Menon <nm@...com>
To: Andrey Skvortsov <andrej.skvortzov@...il.com>,
BenoƮt Cousson
<bcousson@...libre.com>, Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
<linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Nishanth Menon <nm@...com>
Subject: Re: [PATCH] ARM: dts: add core2 padconf region for am3517
On 05/10/2015 04:27 PM, Andrey Skvortsov wrote:
> According to the technical reference manual for AM35xx system
> controller module (SCM) PADCONFS core registers are divided in two
> regions: 0x48002030..0x48002268 and 0x480025d8..0x480025FC.
> First region is the same for all omap3 SoC and is described in omap3.dtsi.
> The second region is the same as in omap34xx (see omap34xx.dtsi)
> and omap35xx. The patch adds missing description for the second region.
> This patch was tested on AM3517.
>
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@...il.com>
> ---
>
> Commit 3d495383648a ("ARM: dts: Split omap3 pinmux core device") notes that
> Nishanth Menon <nm@...com> said that 3517 does not have padconf2 region.
> Unfortunately I couldn't find reference to his post on mailing list.
> This patch was tested on AM3517 SoC and original vendor code contains
> pinmuxing for this second region as well.
http://www.ti.com/lit/ug/sprugr0c/sprugr0c.pdf
CONTROL_PADCONF_ETK_CLK is indeed at 0x480025D8
Apologies on missing it :(
>
> arch/arm/boot/dts/am3517.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
> index c90724b..2534500 100644
> --- a/arch/arm/boot/dts/am3517.dtsi
> +++ b/arch/arm/boot/dts/am3517.dtsi
> @@ -60,5 +60,16 @@
> dma-names = "tx", "rx";
> clock-frequency = <48000000>;
> };
> +
> + omap3_pmx_core2: pinmux@...025D8 {
> + compatible = "ti,omap3-padconf", "pinctrl-single";
> + reg = <0x480025D8 0x24>;
b8845074cfbbd1d1b46720a1b563d7b4240dac21 ("ARM: dts: omap3: add minimal
l4 bus layout with control module support") moves omap3_pmx_core under
scm -> should'nt we do the same here?
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + pinctrl-single,register-width = <16>;
> + pinctrl-single,function-mask = <0xff1f>;
> + };
> };
> };
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists