lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <SNT151-W66995CBCE779DC81EE740CE7DB0@phx.gbl>
Date:	Mon, 11 May 2015 12:13:00 +0530
From:	ram kiran <indrakanti_ram@...mail.com>
To:	serial <linux-serial@...r.kernel.org>, Jiri Slaby <jslaby@...e.cz>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:	Jakub KiciƄski <moorray3@...pl>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] sc16is7xx: spi interface is added.



----------------------------------------
> From: indrakanti_ram@...mail.com
> To: linux-serial@...r.kernel.org
> CC: moorray3@...pl; indrakanti_ram@...mail.com
> Subject: [PATCH] sc16is7xx: spi interface is added.
> Date: Mon, 11 May 2015 11:04:28 +0530
>
CC to the maintainers is missing, adding them up....

> spi interface for sc16is7xx is added along with Kconfig flag
> to enable spi or i2c, thus in a instance we can have either
> spi or i2c, in sync to the hw.
>
> Signed-off-by: ram.i hcltech <indrakanti_ram@...mail.com>
> ---
> drivers/tty/serial/Kconfig | 10 ++++++
> drivers/tty/serial/sc16is7xx.c | 70 +++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 79 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index f8120c1..10e41b2 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1189,6 +1189,16 @@ config SERIAL_SC16IS7XX
> Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
> SC16IS760 and SC16IS762.
>
> +config SERIAL_SC16IS7XX_SPI
> + bool "SC16IS7xx for spi interface"
> + depends on SERIAL_SC16IS7XX
> + depends on SPI_MASTER
> + select REGMAP_SPI if SPI_MASTER
> + help
> + to enable spi interface for SC16IS7XX, say Y,
> + Otherwise, for i2c say N.
> + this would make driver to interface with spi or i2c.
> +
> config SERIAL_BFIN_SPORT
> tristate "Blackfin SPORT emulate UART"
> depends on BLACKFIN
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index 468354e..b67a654 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -25,6 +25,7 @@
> #include <linux/serial.h>
> #include <linux/tty.h>
> #include <linux/tty_flip.h>
> +#include <linux/spi/spi.h>
> #include <linux/uaccess.h>
>
> #define SC16IS7XX_NAME "sc16is7xx"
> @@ -1204,6 +1205,71 @@ static struct regmap_config regcfg = {
> .precious_reg = sc16is7xx_regmap_precious,
> };
>
> +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
> +static int sc16is7xx_spi_probe(struct spi_device *spi)
> +{
> + struct sc16is7xx_devtype *devtype;
> + unsigned long flags = 0;
> + struct regmap *regmap;
> + int ret;
> +
> + /* Setup SPI bus */
> + spi->bits_per_word = 8;
> + /*only supports mode 0 on SC16IS762*/
> + spi->mode = spi->mode ? : SPI_MODE_0;
> + spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
> + ret = spi_setup(spi);
> + if (ret)
> + return ret;
> +
> + if (spi->dev.of_node) {
> + const struct of_device_id *of_id =
> + of_match_device(sc16is7xx_dt_ids, &spi->dev);
> +
> + devtype = (struct sc16is7xx_devtype *)of_id->data;
> + } else {
> + const struct spi_device_id *id_entry = spi_get_device_id(spi);
> +
> + devtype = (struct sc16is7xx_devtype *)id_entry->driver_data;
> + flags = IRQF_TRIGGER_FALLING;
> + }
> +
> + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
> + (devtype->nr_uart - 1);
> + regmap = devm_regmap_init_spi(spi, &regcfg);
> +
> + return sc16is7xx_probe(&spi->dev, devtype, regmap, spi->irq, flags);
> +}
> +
> +static int sc16is7xx_spi_remove(struct spi_device *spi)
> +{
> + return sc16is7xx_remove(&spi->dev);
> +}
> +
> +static const struct spi_device_id sc16is7xx_spi_id_table[] = {
> + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
> + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
> + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
> + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
> + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
> +
> +static struct spi_driver sc16is7xx_spi_uart_driver = {
> + .driver = {
> + .name = SC16IS7XX_NAME,
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(sc16is7xx_dt_ids),
> + },
> + .probe = sc16is7xx_spi_probe,
> + .remove = sc16is7xx_spi_remove,
> + .id_table = sc16is7xx_spi_id_table,
> +};
> +module_spi_driver(sc16is7xx_spi_uart_driver);
> +
> +#else
> static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> @@ -1253,8 +1319,10 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = {
> .remove = sc16is7xx_i2c_remove,
> .id_table = sc16is7xx_i2c_id_table,
> };
> +
> module_i2c_driver(sc16is7xx_i2c_uart_driver);
> -MODULE_ALIAS("i2c:sc16is7xx");
> +#endif
> +MODULE_ALIAS("i2c/spi:sc16is7xx");
>
> MODULE_LICENSE("GPL");
> MODULE_AUTHOR("Jon Ringle <jringle@...dpoint.com>");
> --
> 1.9.1
>
 		 	   		  --
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ