[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1431507163-19933-14-git-send-email-s.hauer@pengutronix.de>
Date: Wed, 13 May 2015 10:52:41 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: linux-pm@...r.kernel.org
Cc: Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>,
linux-kernel@...r.kernel.org,
Stephen Warren <swarren@...dotorg.org>,
Mikko Perttunen <mikko.perttunen@...si.fi>,
kernel@...gutronix.de, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
Brian Norris <computersforpeace@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH 13/15] dt-bindings: thermal: Add binding document for Mediatek thermal controller
Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
---
.../bindings/thermal/mediatek-thermal.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 0000000..adf5d2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -0,0 +1,36 @@
+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC.
+
+Required properties:
+- compatible: "mediatek,mt8173-thermal"
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+ clocks are:
+ "therm": Main clock needed for register access
+ "auxadc": The AUXADC clock
+- resets, reset-names: Reference to the reset controller controlling the thermal
+ controller. Required reset-names:
+ "therm": The main reset line
+- auxadc: A phandle to the AUXADC which the thermal controller uses
+- apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
+
+Example:
+
+ thermal: thermal@...0b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt8173-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ auxadc = <&auxadc>;
+ apmixedsys = <&apmixedsys>;
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists