[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20150513122942.GW3394@x1>
Date: Wed, 13 May 2015 13:29:42 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Richard Fitzgerald <rf@...nsource.wolfsonmicro.com>
Cc: broonie@...nel.org, linus.walleij@...aro.org, gnurou@...il.com,
cw00.choi@...sung.com, myungjoo.ham@...sung.com,
devicetree@...r.kernel.org, alsa-devel@...a-project.org,
patches@...nsource.wolfsonmicro.com, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, ckeepax@...nsource.wolfsonmicro.com
Subject: Re: [PATCH v3 8/8] Documentation: Add WM8998/WM1814 device tree
bindings
On Fri, 01 May 2015, Richard Fitzgerald wrote:
> Signed-off-by: Richard Fitzgerald <rf@...nsource.wolfsonmicro.com>
> ---
> Documentation/devicetree/bindings/mfd/arizona.txt | 13 +++++++++----
> 1 files changed, 9 insertions(+), 4 deletions(-)
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index 7665aa9..64fa3b2 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -10,6 +10,9 @@ Required properties:
> "wlf,wm5110"
> "wlf,wm8280"
> "wlf,wm8997"
> + "wlf,wm8998"
> + "wlf,wm1814"
> +
> - reg : I2C slave address when connected using I2C, chip select number when
> using SPI.
>
> @@ -31,10 +34,10 @@ Required properties:
> as covered in Documentation/devicetree/bindings/regulator/regulator.txt
>
> - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
> - wm5110, wm8280)
> + wm5110, wm8280, wm8998, wm1814)
>
> - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
> - wm5110, wm8280)
> + wm5110, wm8280, wm8998, wm1814)
>
> - SPKVDD-supply : Speaker driver power supply (wm8997)
>
> @@ -53,8 +56,10 @@ Optional properties:
> of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
> 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
> If present, values must be specified less than or equal to the number of
> - input singals. If values less than the number of input signals, elements
> - that has not been specifed are set to 0 by default.
> + input signals. If values less than the number of input signals, elements
> + that have not been specified are set to 0 by default. Entries are:
> + <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
> + <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
>
> - wlf,dmic-ref : DMIC reference voltage source for each input, can be
> selected from either MICVDD or one of the MICBIAS's, defines
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists