| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150514074504.GB22418@x1>
Date: Thu, 14 May 2015 08:45:04 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Jon Hunter <jonathanh@...dia.com>
Cc: Andrew Bresticker <abrestic@...omium.org>,
Stephen Warren <swarren@...dotorg.org>,
Thierry Reding <thierry.reding@...il.com>,
Alexandre Courbot <gnurou@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Samuel Ortiz <sameo@...ux.intel.com>
Subject: Re: [PATCH v8 4/9] mfd: Add binding document for NVIDIA Tegra XUSB
On Thu, 14 May 2015, Jon Hunter wrote:
>
> On 14/05/15 08:29, Lee Jones wrote:
> > On Wed, 13 May 2015, Andrew Bresticker wrote:
> >
> >> On Wed, May 13, 2015 at 9:50 AM, Lee Jones <lee.jones@...aro.org> wrote:
> >>> On Wed, 13 May 2015, Andrew Bresticker wrote:
> >>>
> >>>> Lee,
> >>>>
> >>>> On Wed, May 13, 2015 at 7:39 AM, Lee Jones <lee.jones@...aro.org> wrote:
> >>>>> On Mon, 04 May 2015, Andrew Bresticker wrote:
> >>>>>
> >>>>>> Add a binding document for the XUSB host complex on NVIDIA Tegra124
> >>>>>> and later SoCs. The XUSB host complex includes a mailbox for
> >>>>>> communication with the XUSB micro-controller and an xHCI host-controller.
> >>>>>>
> >>>>>> Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
> >>>>>> Cc: Rob Herring <robh+dt@...nel.org>
> >>>>>> Cc: Pawel Moll <pawel.moll@....com>
> >>>>>> Cc: Mark Rutland <mark.rutland@....com>
> >>>>>> Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
> >>>>>> Cc: Kumar Gala <galak@...eaurora.org>
> >>>>>> Cc: Samuel Ortiz <sameo@...ux.intel.com>
> >>>>>> Cc: Lee Jones <lee.jones@...aro.org>
> >>>>>> ---
> >>>>>> Changes from v7:
> >>>>>> - Move non-shared resources into child nodes.
> >>>>>> New for v7.
> >>>>>> ---
> >>>>>> .../bindings/mfd/nvidia,tegra124-xusb.txt | 37 ++++++++++++++++++++++
> >>>>>> 1 file changed, 37 insertions(+)
> >>>>>> create mode 100644 Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>>>>
> >>>>>> diff --git a/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>>>> new file mode 100644
> >>>>>> index 0000000..bc50110
> >>>>>> --- /dev/null
> >>>>>> +++ b/Documentation/devicetree/bindings/mfd/nvidia,tegra124-xusb.txt
> >>>>>> @@ -0,0 +1,37 @@
> >>>>>> +NVIDIA Tegra XUSB host copmlex
> >>>>>> +==============================
> >>>>>> +
> >>>>>> +The XUSB host complex on Tegra124 and later SoCs contains an xHCI host
> >>>>>> +controller and a mailbox for communication with the XUSB micro-controller.
> >>>>>> +
> >>>>>> +Required properties:
> >>>>>> +--------------------
> >>>>>> + - compatible: For Tegra124, must contain "nvidia,tegra124-xusb".
> >>>>>> + Otherwise, must contain '"nvidia,<chip>-xusb", "nvidia,tegra124-xusb"'
> >>>>>> + where <chip> is tegra132.
> >>>>>> + - reg: Must contain the base and length of the XUSB FPCI registers.
> >>>>>> + - ranges: Bus address mapping for the XUSB block. Can be empty since the
> >>>>>> + mapping is 1:1.
> >>>>>> + - #address-cells: Must be 2.
> >>>>>> + - #size-cells: Must be 2.
> >>>>>> +
> >>>>>> +Example:
> >>>>>> +--------
> >>>>>> + usb@0,70098000 {
> >>>>>> + compatible = "nvidia,tegra124-xusb";
> >>>>>> + reg = <0x0 0x70098000 0x0 0x1000>;
> >>>>>> + ranges;
> >>>>>> +
> >>>>>> + #address-cells = <2>;
> >>>>>> + #size-cells = <2>;
> >>>>>> +
> >>>>>> + usb-host@0,70090000 {
> >>>>>> + compatible = "nvidia,tegra124-xhci";
> >>>>>> + ...
> >>>>>> + };
> >>>>>> +
> >>>>>> + mailbox {
> >>>>>> + compatible = "nvidia,tegra124-xusb-mbox";
> >>>>>> + ...
> >>>>>> + };
> >>>>>
> >>>>> This doesn't appear to be a proper MFD. I would have the USB and
> >>>>> Mailbox devices probe seperately and use a phandle to point the USB
> >>>>> device to its Mailbox.
> >>>>>
> >>>>> usb@xyz {
> >>>>> mboxes = <&xusb-mailbox, [chan]>;
> >>>>> };
> >>>>
> >>>> Then what will set up the shared regmap? The point of using an MFD
> >>>> here was to share a register set with both the mailbox and xHCI
> >>>> drivers and avoid having to map the same register set twice in two
> >>>> separate drivers.
> >>>
> >>> Can you share the mapping please?
> >>
> >> What do you mean? That's what the MFD is doing now by setting up an
> >> MMIO regmap to be shared between the two devices.
> >
> > I mean, can you share the documentation with me. :)
>
> You can download the documentation from here [1]. See chapter 19 USB
> complex. However, I will warn you that unfortunately, you need to sign
> up for an account :-(
I'll give that a miss for the time being. See my other mail for now.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists