lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1431600868-11737-2-git-send-email-pali.rohar@gmail.com>
Date:	Thu, 14 May 2015 12:54:25 +0200
From:	Pali Rohár <pali.rohar@...il.com>
To:	Darren Hart <dvhart@...radead.org>
Cc:	platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
	Gabriele Mazzotta <gabriele.mzt@...il.com>,
	Alex Hung <alex.hung@...onical.com>,
	Matthew Garrett <mjg59@...f.ucam.org>,
	Pali Rohár <pali.rohar@...il.com>,
	Darren Hart <dvhart@...ux.intel.com>
Subject: [PATCH v3 1/3] dell-rbtn: Dell Airplane Mode Switch driver

This is an ACPI driver for Dell laptops which receive HW switch events.
It exports rfkill device dell-rbtn which provide correct hard rfkill state.

Alex Hung added code for supporting Dell laptops which have toggle button
instead HW slider switch. On these laptops toggle button event is reported
by new input device (instead rfkill) as they do not have hw radio switch.

It looks like those are two different functions (rfkill, input device), but
Dell BIOS exports them via same ACPI device and uses same ACPI functions.
So code is in one kernel driver.

Signed-off-by: Pali Rohár <pali.rohar@...il.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@...il.com>
Cc: Alex Hung <alex.hung@...onical.com>

Correct multi-line comment formatting and line length issues.

Signed-off-by: Darren Hart <dvhart@...ux.intel.com>

[Fengguang Wu <fengguang.wu@...el.com>: rbtn_ops can be static]
---
Changes since v2:
 - rbtn_ops is static
 - added MAINTAINERS
 - fixed checkpatch.pl warnings
---
 MAINTAINERS                      |    5 +
 drivers/platform/x86/Kconfig     |   13 ++
 drivers/platform/x86/Makefile    |    1 +
 drivers/platform/x86/dell-rbtn.c |  345 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 364 insertions(+)
 create mode 100644 drivers/platform/x86/dell-rbtn.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 2e5bbc0..5808066 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3071,6 +3071,11 @@ L:	platform-driver-x86@...r.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/dell-laptop.c
 
+DELL LAPTOP RBTN DRIVER
+M:	Pali Rohár <pali.rohar@...il.com>
+S:	Maintained
+F:	drivers/platform/x86/dell-rbtn.*
+
 DELL LAPTOP FREEFALL DRIVER
 M:	Pali Rohár <pali.rohar@...il.com>
 S:	Maintained
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 399085d..8c03223 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -138,6 +138,19 @@ config DELL_SMO8800
 	  To compile this driver as a module, choose M here: the module will
 	  be called dell-smo8800.
 
+config DELL_RBTN
+	tristate "Dell Airplane Mode Switch driver"
+	depends on ACPI
+	depends on RFKILL
+	---help---
+	  Say Y here if you want to support Dell Airplane Mode Switch ACPI
+	  device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+	  This driver register rfkill device and receives HW rfkill events
+	  (when wifi/bluetooth was enabled) and set correct hard rfkill state.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-rbtn.
+
 
 config FUJITSU_LAPTOP
 	tristate "Fujitsu Laptop Extras"
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index f82232b..b3e54ed 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
 obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
 obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
+obj-$(CONFIG_DELL_RBTN)		+= dell-rbtn.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ACERHDF)		+= acerhdf.o
 obj-$(CONFIG_HP_ACCEL)		+= hp_accel.o
diff --git a/drivers/platform/x86/dell-rbtn.c b/drivers/platform/x86/dell-rbtn.c
new file mode 100644
index 0000000..af89f91
--- /dev/null
+++ b/drivers/platform/x86/dell-rbtn.c
@@ -0,0 +1,345 @@
+/*
+    Dell Airplane Mode Switch driver
+    Copyright (C) 2014-2015  Pali Rohár <pali.rohar@...il.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/input.h>
+
+enum rbtn_type {
+	RBTN_UNKNOWN,
+	RBTN_TOGGLE,
+	RBTN_SLIDER,
+};
+
+struct rbtn_data {
+	enum rbtn_type type;
+	struct rfkill *rfkill;
+	struct input_dev *input_dev;
+};
+
+
+/*
+ * acpi functions
+ */
+
+static enum rbtn_type rbtn_check(struct acpi_device *device)
+{
+	unsigned long long output;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "CRBT", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return RBTN_UNKNOWN;
+
+	switch (output) {
+	case 0:
+	case 1:
+		return RBTN_TOGGLE;
+	case 2:
+	case 3:
+		return RBTN_SLIDER;
+	default:
+		return RBTN_UNKNOWN;
+	}
+}
+
+static int rbtn_get(struct acpi_device *device)
+{
+	unsigned long long output;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "GRBT", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return !output;
+}
+
+static int rbtn_radio_enable(struct acpi_device *device, bool enable)
+{
+	struct acpi_object_list input;
+	union acpi_object param;
+	acpi_status status;
+
+	param.type = ACPI_TYPE_INTEGER;
+	param.integer.value = enable;
+	input.count = 1;
+	input.pointer = &param;
+
+	status = acpi_evaluate_object(device->handle, "ARBT", &input, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+
+/*
+ * rfkill device
+ */
+
+static void rbtn_rfkill_query(struct rfkill *rfkill, void *data)
+{
+	struct acpi_device *device = data;
+	int state;
+
+	state = rbtn_get(device);
+	if (state < 0)
+		return;
+
+	rfkill_set_states(rfkill, state, state);
+}
+
+static int rbtn_rfkill_set_block(void *data, bool blocked)
+{
+	/* NOTE: setting soft rfkill state is not supported */
+	return -EINVAL;
+}
+
+static struct rfkill_ops rbtn_ops = {
+	.query = rbtn_rfkill_query,
+	.set_block = rbtn_rfkill_set_block,
+};
+
+static int rbtn_rfkill_init(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+	int ret;
+
+	if (rbtn_data->rfkill)
+		return 0;
+
+	/* NOTE: rbtn controls all radio devices, not only WLAN
+	 *       but rfkill interface does not support "ANY" type
+	 *       so "WLAN" type is used
+	 */
+	rbtn_data->rfkill = rfkill_alloc("dell-rbtn", &device->dev,
+					 RFKILL_TYPE_WLAN, &rbtn_ops, device);
+	if (!rbtn_data->rfkill)
+		return -ENOMEM;
+
+	ret = rfkill_register(rbtn_data->rfkill);
+	if (ret) {
+		rfkill_destroy(rbtn_data->rfkill);
+		rbtn_data->rfkill = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rbtn_rfkill_exit(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (!rbtn_data->rfkill)
+		return;
+
+	rfkill_unregister(rbtn_data->rfkill);
+	rfkill_destroy(rbtn_data->rfkill);
+	rbtn_data->rfkill = NULL;
+}
+
+static void rbtn_rfkill_event(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (rbtn_data->rfkill)
+		rbtn_rfkill_query(rbtn_data->rfkill, device);
+}
+
+
+/*
+ * input device
+ */
+
+static int rbtn_input_init(struct rbtn_data *rbtn_data)
+{
+	int ret;
+
+	rbtn_data->input_dev = input_allocate_device();
+	if (!rbtn_data->input_dev)
+		return -ENOMEM;
+
+	rbtn_data->input_dev->name = "DELL Wireless hotkeys";
+	rbtn_data->input_dev->phys = "dellabce/input0";
+	rbtn_data->input_dev->id.bustype = BUS_HOST;
+	rbtn_data->input_dev->evbit[0] = BIT(EV_KEY);
+	set_bit(KEY_RFKILL, rbtn_data->input_dev->keybit);
+
+	ret = input_register_device(rbtn_data->input_dev);
+	if (ret) {
+		input_free_device(rbtn_data->input_dev);
+		rbtn_data->input_dev = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rbtn_input_exit(struct rbtn_data *rbtn_data)
+{
+	input_unregister_device(rbtn_data->input_dev);
+	rbtn_data->input_dev = NULL;
+}
+
+static void rbtn_input_event(struct rbtn_data *rbtn_data)
+{
+	input_report_key(rbtn_data->input_dev, KEY_RFKILL, 1);
+	input_sync(rbtn_data->input_dev);
+	input_report_key(rbtn_data->input_dev, KEY_RFKILL, 0);
+	input_sync(rbtn_data->input_dev);
+}
+
+
+/*
+ * acpi driver
+ */
+
+static int rbtn_add(struct acpi_device *device);
+static int rbtn_remove(struct acpi_device *device);
+static void rbtn_notify(struct acpi_device *device, u32 event);
+
+static const struct acpi_device_id rbtn_ids[] = {
+	{ "DELRBTN", 0 },
+	{ "DELLABCE", 0 },
+	{ "", 0 },
+};
+
+static struct acpi_driver rbtn_driver = {
+	.name = "dell-rbtn",
+	.ids = rbtn_ids,
+	.ops = {
+		.add = rbtn_add,
+		.remove = rbtn_remove,
+		.notify = rbtn_notify,
+	},
+	.owner = THIS_MODULE,
+};
+
+
+/*
+ * acpi driver functions
+ */
+
+static int rbtn_add(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data;
+	enum rbtn_type type;
+	int ret = 0;
+
+	type = rbtn_check(device);
+	if (type == RBTN_UNKNOWN) {
+		dev_info(&device->dev, "Unknown device type\n");
+		return -EINVAL;
+	}
+
+	ret = rbtn_radio_enable(device, true);
+	if (ret < 0) {
+		dev_err(&device->dev, "Cannot enable device\n");
+		return ret;
+	}
+
+	rbtn_data = devm_kzalloc(&device->dev, sizeof(*rbtn_data), GFP_KERNEL);
+	if (!rbtn_data)
+		return -ENOMEM;
+
+	rbtn_data->type = type;
+	device->driver_data = rbtn_data;
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		ret = rbtn_input_init(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		ret = rbtn_rfkill_init(device);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+
+}
+
+static int rbtn_remove(struct acpi_device *device)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+	int ret;
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		rbtn_input_exit(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		rbtn_rfkill_exit(device);
+		break;
+	default:
+		break;
+	}
+
+	ret = rbtn_radio_enable(device, false);
+	if (ret < 0)
+		return ret;
+
+	device->driver_data = NULL;
+	return 0;
+}
+
+static void rbtn_notify(struct acpi_device *device, u32 event)
+{
+	struct rbtn_data *rbtn_data = device->driver_data;
+
+	if (event != 0x80) {
+		dev_info(&device->dev, "Received unknown event (0x%x)\n",
+			 event);
+		return;
+	}
+
+	switch (rbtn_data->type) {
+	case RBTN_TOGGLE:
+		rbtn_input_event(rbtn_data);
+		break;
+	case RBTN_SLIDER:
+		rbtn_rfkill_event(device);
+		break;
+	default:
+		break;
+	}
+}
+
+
+/*
+ * module functions
+ */
+
+static int __init rbtn_init(void)
+{
+	return acpi_bus_register_driver(&rbtn_driver);
+}
+
+static void __exit rbtn_exit(void)
+{
+	acpi_bus_unregister_driver(&rbtn_driver);
+}
+
+module_init(rbtn_init);
+module_exit(rbtn_exit);
+
+MODULE_DEVICE_TABLE(acpi, rbtn_ids);
+MODULE_DESCRIPTION("Dell Airplane Mode Switch driver");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@...il.com>");
+MODULE_LICENSE("GPL");
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ