lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <555507E2.2020606@opensource.altera.com>
Date:	Thu, 14 May 2015 15:38:58 -0500
From:	Thor Thayer <tthayer@...nsource.altera.com>
To:	Dinh Nguyen <dinguyen@...nsource.altera.com>, <bp@...en8.de>,
	<dougthompson@...ssion.com>, <m.chehab@...sung.com>,
	<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
	<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
	<linux@....linux.org.uk>, <grant.likely@...aro.org>
CC:	<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
	<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <tthayer.linux@...il.com>
Subject: Re: [PATCH 3/4] edac, altera: Addition of Arria10 EDAC



On 05/14/2015 03:20 PM, Dinh Nguyen wrote:
> On 05/13/2015 04:49 PM, tthayer@...nsource.altera.com wrote:
>> From: Thor Thayer <tthayer@...nsource.altera.com>
>>
>> The Arria10 SDRAM and ECC system differs significantly from the
>> Cyclone5 and Arria5 SoCs. This patch adds support for the Arria10
>> SoC.
>> 1) IRQ handler needs to support SHARED IRQ
>> 2) Support sberr and dberr address reporting.
>>
>> Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
>> ---
>>   drivers/edac/altera_edac.c |  132 ++++++++++++++++++++++++++++++++++++++------
>>   drivers/edac/altera_edac.h |   85 ++++++++++++++++++++++++++++
>>   2 files changed, 201 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
>> index 204ad2d..735a180 100644
>> --- a/drivers/edac/altera_edac.c
>> +++ b/drivers/edac/altera_edac.c
>> @@ -42,6 +42,7 @@ const struct altr_sdram_prv_data c5_data = {
>>   	.ecc_stat_ce_mask   = CV_DRAMSTS_SBEERR,
>>   	.ecc_stat_ue_mask   = CV_DRAMSTS_DBEERR,
>>   	.ecc_saddr_offset   = CV_ERRADDR_OFST,
>> +	.ecc_daddr_offset   = CV_ERRADDR_OFST,
>>   	.ecc_cecnt_offset   = CV_SBECOUNT_OFST,
>>   	.ecc_uecnt_offset   = CV_DBECOUNT_OFST,
>>   	.ecc_irq_en_offset  = CV_DRAMINTR_OFST,
>> @@ -57,37 +58,62 @@ const struct altr_sdram_prv_data c5_data = {
>>   #endif
>>   };
>>
>> +const struct altr_sdram_prv_data a10_data = {\
>
> This should be static.
>
>> +	.ecc_ctrl_offset    = A10_ECCCTRL1_OFST,
>> +	.ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
>> +	.ecc_stat_offset    = A10_INTSTAT_OFST,
>> +	.ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
>> +	.ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
>> +	.ecc_saddr_offset   = A10_SERRADDR_OFST,
>> +	.ecc_daddr_offset   = A10_DERRADDR_OFST,
>> +	.ecc_irq_en_offset  = A10_ERRINTEN_OFST,
>> +	.ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
>> +	.ecc_irq_clr_offset = A10_INTSTAT_OFST,
>> +	.ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
>> +	.ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
>> +	.ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
>> +#ifdef CONFIG_EDAC_DEBUG
>> +	.ce_ue_trgr_offset  = A10_DIAGINTTEST_OFST,
>> +	.ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
>> +	.ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
>> +#endif
>> +};
>> +
>>
> <snip>
>
>> +
>>   static int altr_sdram_probe(struct platform_device *pdev)
>>   {
>>   	const struct of_device_id *id;
>> @@ -221,8 +295,8 @@ static int altr_sdram_probe(struct platform_device *pdev)
>>   	struct regmap *mc_vbase;
>>   	struct dimm_info *dimm;
>>   	u32 read_reg;
>> -	int irq, res = 0;
>> -	unsigned long mem_size;
>> +	int irq, irq2, res = 0;
>> +	unsigned long mem_size, irqflags;
>>
>>   	id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
>>   	if (!id)
>> @@ -288,6 +362,9 @@ static int altr_sdram_probe(struct platform_device *pdev)
>>   		return -ENODEV;
>>   	}
>>
>> +	/* Arria10 has a 2nd IRQ */
>> +	irq2 = platform_get_irq(pdev, 1);
>> +
>>   	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
>>   	layers[0].size = 1;
>>   	layers[0].is_virt_csrow = true;
>> @@ -332,8 +409,31 @@ static int altr_sdram_probe(struct platform_device *pdev)
>>   	if (res < 0)
>>   		goto err;
>>
>> +	/* Only the Arria10 has separate IRQs */
>> +	if (irq2 > 0) {
>> +		/* Arria10 specific initialization */
>> +		res = a10_init(mc_vbase);
>> +		if (res < 0)
>> +			goto err2;
>> +
>> +		res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
>> +		if (res < 0)
>> +			goto err2;
>> +
>> +		res = devm_request_irq(&pdev->dev, irq2,
>> +				       altr_sdram_mc_err_handler,
>> +				       IRQF_SHARED, dev_name(&pdev->dev), mci);
>> +		if (res < 0) {
>> +			edac_mc_printk(mci, KERN_ERR,
>> +				       "Unable to request irq %d\n", irq2);
>> +			res = -ENODEV;
>> +			goto err2;
>> +		}
>> +		irqflags = IRQF_SHARED;
>> +	}
>> +
>>   	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
>> -			       0, dev_name(&pdev->dev), mci);
>> +			       irqflags, dev_name(&pdev->dev), mci);
>
> irqflags was never set for the case of !(irq2 > 0).
>
> Dinh
>

Correct. So irqflags will be 0 for the CycloneV case.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ