lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 15 May 2015 02:00:06 +0300
From:	Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
To:	linux-kernel@...r.kernel.org
Cc:	linux-arm-kernel@...ts.infradead.org,
	iommu@...ts.linux-foundation.org,
	Laura Abbott <lauraa@...eaurora.org>,
	Arnd Bergmann <arnd@...db.de>,
	Mitchel Humpherys <mitchelh@...eaurora.org>,
	Joreg Roedel <joro@...tes.org>,
	Will Deacon <will.deacon@....com>,
	Grant Likely <grant.likely@...aro.org>,
	Robin Murphy <robin.murphy@....com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Thierry Reding <thierry.reding@...il.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [RFC/PATCH 5/9] of: dma: Split of_configure_dma() into mask and ops configuration

The of_configure_dma() function configures both the DMA masks and ops.
Moving DMA ops configuration to probe time would thus also delay
configuration of the DMA masks, which might not be safe. To avoid issues
split the configuration in two to allow keeping masks configuration at
device add time and move ops configuration to device probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
---
 drivers/of/device.c       | 48 ++++++++++++++++++++++++++++++++++-------------
 drivers/of/of_pci.c       |  3 ++-
 drivers/of/platform.c     |  6 ++++--
 include/linux/of_device.h | 11 +++++++++--
 4 files changed, 50 insertions(+), 18 deletions(-)

diff --git a/drivers/of/device.c b/drivers/of/device.c
index f1b84f464fe1..3cb3f78a6d13 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -70,7 +70,7 @@ int of_device_add(struct platform_device *ofdev)
 }
 
 /**
- * of_dma_configure - Setup DMA configuration
+ * of_dma_configure - Setup DMA masks and offset
  * @dev:	Device to apply DMA configuration
  * @np:		Pointer to OF node having DMA configuration
  *
@@ -81,13 +81,11 @@ int of_device_add(struct platform_device *ofdev)
  * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
  * to fix up DMA configuration.
  */
-void of_dma_configure(struct device *dev, struct device_node *np)
+void of_dma_configure_masks(struct device *dev, struct device_node *np)
 {
-	u64 dma_addr, paddr, size;
-	int ret;
-	bool coherent;
+	u64 dma_addr, paddr, size, range_mask;
 	unsigned long offset;
-	struct iommu_ops *iommu;
+	int ret;
 
 	/*
 	 * Set default coherent_dma_mask to 32 bit.  Drivers are expected to
@@ -105,9 +103,10 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 
 	ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
 	if (ret < 0) {
-		dma_addr = offset = 0;
-		size = dev->coherent_dma_mask + 1;
+		range_mask = dev->coherent_dma_mask + 1;
+		offset = 0;
 	} else {
+		range_mask = DMA_BIT_MASK(ilog2(dma_addr + size));
 		offset = PFN_DOWN(paddr - dma_addr);
 		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
@@ -118,10 +117,31 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 	 * Limit coherent and dma mask based on size and default mask
 	 * set by the driver.
 	 */
-	dev->coherent_dma_mask = min(dev->coherent_dma_mask,
-				     DMA_BIT_MASK(ilog2(dma_addr + size)));
-	*dev->dma_mask = min((*dev->dma_mask),
-			     DMA_BIT_MASK(ilog2(dma_addr + size)));
+	dev->coherent_dma_mask = min(dev->coherent_dma_mask, range_mask);
+	*dev->dma_mask = min((*dev->dma_mask), range_mask);
+}
+EXPORT_SYMBOL_GPL(of_dma_configure_masks);
+
+/**
+ * of_dma_configure_ops - Setup DMA operations
+ * @dev:	Device to apply DMA configuration
+ * @np:		Pointer to OF node having DMA configuration
+ *
+ * Try to get devices's DMA configuration from DT and update it
+ * accordingly.
+ */
+int of_dma_configure_ops(struct device *dev, struct device_node *np)
+{
+	u64 dma_addr, paddr, size;
+	struct iommu_ops *iommu;
+	bool coherent;
+	int ret;
+
+	ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
+	if (ret < 0) {
+		dma_addr = 0;
+		size = dev->coherent_dma_mask + 1;
+	}
 
 	coherent = of_dma_is_coherent(np);
 	dev_dbg(dev, "device is%sdma coherent\n",
@@ -132,8 +152,10 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 		iommu ? " " : " not ");
 
 	arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(of_dma_configure);
+EXPORT_SYMBOL_GPL(of_dma_configure_ops);
 
 /**
  * of_dma_deconfigure - Clean up DMA configuration
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index 5751dc5b6494..c65803da2067 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -132,7 +132,8 @@ void of_pci_dma_configure(struct pci_dev *pci_dev)
 	if (!bridge->parent)
 		return;
 
-	of_dma_configure(dev, bridge->parent->of_node);
+	of_dma_configure_masks(dev, bridge->parent->of_node);
+	of_dma_configure_ops(dev, bridge->parent->of_node);
 	pci_put_host_bridge_device(bridge);
 }
 EXPORT_SYMBOL_GPL(of_pci_dma_configure);
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 7a660c79ff84..9a29f09b7723 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -177,7 +177,8 @@ static struct platform_device *of_platform_device_create_pdata(
 
 	dev->dev.bus = &platform_bus_type;
 	dev->dev.platform_data = platform_data;
-	of_dma_configure(&dev->dev, dev->dev.of_node);
+	of_dma_configure_masks(&dev->dev, dev->dev.of_node);
+	of_dma_configure_ops(&dev->dev, dev->dev.of_node);
 
 	if (of_device_add(dev) != 0) {
 		of_dma_deconfigure(&dev->dev);
@@ -240,7 +241,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
 		dev_set_name(&dev->dev, "%s", bus_id);
 	else
 		of_device_make_bus_id(&dev->dev);
-	of_dma_configure(&dev->dev, dev->dev.of_node);
+	of_dma_configure_masks(&dev->dev, dev->dev.of_node);
+	of_dma_configure_ops(&dev->dev, dev->dev.of_node);
 
 	/* Allow the HW Peripheral ID to be overridden */
 	prop = of_get_property(node, "arm,primecell-periphid", NULL);
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 6710807b0653..794f234c7c7d 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -53,7 +53,8 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
 	return of_node_get(cpu_dev->of_node);
 }
 
-void of_dma_configure(struct device *dev, struct device_node *np);
+void of_dma_configure_masks(struct device *dev, struct device_node *np);
+int of_dma_configure_ops(struct device *dev, struct device_node *np);
 void of_dma_deconfigure(struct device *dev);
 #else /* CONFIG_OF */
 
@@ -92,8 +93,14 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
 {
 	return NULL;
 }
-static inline void of_dma_configure(struct device *dev, struct device_node *np)
+static inline void of_dma_configure_masks(struct device *dev,
+					  struct device_node *np)
 {}
+static inline int of_dma_configure_ops(struct device *dev,
+				       struct device_node *np)
+{
+	return 0;
+}
 static inline void of_dma_deconfigure(struct device *dev)
 {}
 #endif /* CONFIG_OF */
-- 
2.3.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ