| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3103353.21mvygJH2D@vostro.rjw.lan>
Date: Fri, 15 May 2015 02:23:27 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Ajay Thomas <ajay.thomas.david.rajamanickam@...el.com>
Cc: rafael.j.wysocki@...el.com, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, minipli@...glemail.com,
durgadoss.r@...el.com, jbaron@...mai.com, brian.bian@...el.com,
jacob.jun.pan@...ux.intel.com, noor.u.mubeen@...el.com
Subject: Re: [PATCH] powercap/RAPL: Floor frequency setting in Atom SoC
On Thursday, April 30, 2015 01:43:23 AM Ajay Thomas wrote:
> CPU Floor frequency is set in BIOS for newer Atom
> SoCs. This patch handles configuration of floor
> frequency for different variants of Atom SoCs
> appropriately and ensures configuration of floor
> frequency is not done from driver for these
> newer Atom SoCs.
>
> Since address of the register for configuring
> floor frequency might change for different
> Atom SoCs, this patch also prevents potential
> overwriting of wrong registers.
>
> Reviewed-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@...el.com>
Queued up for 4.2, thanks!
> ---
> drivers/powercap/intel_rapl.c | 50 +++++++++++++++++++++++++++++++++--------
> 1 file changed, 41 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
> index fd24323..f332628 100644
> --- a/drivers/powercap/intel_rapl.c
> +++ b/drivers/powercap/intel_rapl.c
> @@ -187,6 +187,7 @@ struct rapl_package {
> };
>
> struct rapl_defaults {
> + u8 floor_freq_reg_addr;
> int (*check_unit)(struct rapl_package *rp, int cpu);
> void (*set_floor_freq)(struct rapl_domain *rd, bool mode);
> u64 (*compute_time_window)(struct rapl_package *rp, u64 val,
> @@ -196,7 +197,8 @@ struct rapl_defaults {
> static struct rapl_defaults *rapl_defaults;
>
> /* Sideband MBI registers */
> -#define IOSF_CPU_POWER_BUDGET_CTL (0x2)
> +#define IOSF_CPU_POWER_BUDGET_CTL_BYT (0x2)
> +#define IOSF_CPU_POWER_BUDGET_CTL_TNG (0xdf)
>
> #define PACKAGE_PLN_INT_SAVED BIT(0)
> #define MAX_PRIM_NAME (32)
> @@ -358,7 +360,8 @@ static int set_domain_enable(struct powercap_zone *power_zone, bool mode)
>
> get_online_cpus();
> rapl_write_data_raw(rd, PL1_ENABLE, mode);
> - rapl_defaults->set_floor_freq(rd, mode);
> + if (rapl_defaults->set_floor_freq)
> + rapl_defaults->set_floor_freq(rd, mode);
> put_online_cpus();
>
> return 0;
> @@ -979,16 +982,22 @@ static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
> static u32 power_ctrl_orig_val;
> u32 mdata;
>
> + if (!rapl_defaults->floor_freq_reg_addr) {
> + pr_err("Invalid floor frequency config register\n");
> + return;
> + }
> +
> if (!power_ctrl_orig_val)
> iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_PMC_READ,
> - IOSF_CPU_POWER_BUDGET_CTL, &power_ctrl_orig_val);
> + rapl_defaults->floor_freq_reg_addr,
> + &power_ctrl_orig_val);
> mdata = power_ctrl_orig_val;
> if (enable) {
> mdata &= ~(0x7f << 8);
> mdata |= 1 << 8;
> }
> iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_PMC_WRITE,
> - IOSF_CPU_POWER_BUDGET_CTL, mdata);
> + rapl_defaults->floor_freq_reg_addr, mdata);
> }
>
> static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
> @@ -1029,6 +1038,7 @@ static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
> }
>
> static const struct rapl_defaults rapl_defaults_core = {
> + .floor_freq_reg_addr = 0,
> .check_unit = rapl_check_unit_core,
> .set_floor_freq = set_floor_freq_default,
> .compute_time_window = rapl_compute_time_window_core,
> @@ -1041,12 +1051,34 @@ static const struct rapl_defaults rapl_defaults_hsw_server = {
> .dram_domain_energy_unit = 15300,
> };
>
> -static const struct rapl_defaults rapl_defaults_atom = {
> +static const struct rapl_defaults rapl_defaults_byt = {
> + .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_BYT,
> + .check_unit = rapl_check_unit_atom,
> + .set_floor_freq = set_floor_freq_atom,
> + .compute_time_window = rapl_compute_time_window_atom,
> +};
> +
> +static const struct rapl_defaults rapl_defaults_tng = {
> + .floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_TNG,
> .check_unit = rapl_check_unit_atom,
> .set_floor_freq = set_floor_freq_atom,
> .compute_time_window = rapl_compute_time_window_atom,
> };
>
> +static const struct rapl_defaults rapl_defaults_ann = {
> + .floor_freq_reg_addr = 0,
> + .check_unit = rapl_check_unit_atom,
> + .set_floor_freq = NULL,
> + .compute_time_window = rapl_compute_time_window_atom,
> +};
> +
> +static const struct rapl_defaults rapl_defaults_cht = {
> + .floor_freq_reg_addr = 0,
> + .check_unit = rapl_check_unit_atom,
> + .set_floor_freq = NULL,
> + .compute_time_window = rapl_compute_time_window_atom,
> +};
> +
> #define RAPL_CPU(_model, _ops) { \
> .vendor = X86_VENDOR_INTEL, \
> .family = 6, \
> @@ -1057,7 +1089,7 @@ static const struct rapl_defaults rapl_defaults_atom = {
> static const struct x86_cpu_id rapl_ids[] __initconst = {
> RAPL_CPU(0x2a, rapl_defaults_core),/* Sandy Bridge */
> RAPL_CPU(0x2d, rapl_defaults_core),/* Sandy Bridge EP */
> - RAPL_CPU(0x37, rapl_defaults_atom),/* Valleyview */
> + RAPL_CPU(0x37, rapl_defaults_byt),/* Valleyview */
> RAPL_CPU(0x3a, rapl_defaults_core),/* Ivy Bridge */
> RAPL_CPU(0x3c, rapl_defaults_core),/* Haswell */
> RAPL_CPU(0x3d, rapl_defaults_core),/* Broadwell */
> @@ -1065,10 +1097,10 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
> RAPL_CPU(0x4f, rapl_defaults_hsw_server),/* Broadwell servers */
> RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */
> RAPL_CPU(0x4E, rapl_defaults_core),/* Skylake */
> - RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */
> - RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */
> + RAPL_CPU(0x4C, rapl_defaults_cht),/* Braswell/Cherryview */
> + RAPL_CPU(0x4A, rapl_defaults_tng),/* Tangier */
> RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */
> - RAPL_CPU(0x5A, rapl_defaults_atom),/* Annidale */
> + RAPL_CPU(0x5A, rapl_defaults_ann),/* Annidale */
> {}
> };
> MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists